[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191119051334.426250996@linuxfoundation.org>
Date: Tue, 19 Nov 2019 06:19:38 +0100
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Vicente Bergas <vicencb@...il.com>,
Heiko Stuebner <heiko@...ech.de>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 4.14 178/239] arm64: dts: rockchip: Fix microSD in rk3399 sapphire board
From: Vicente Bergas <vicencb@...il.com>
[ Upstream commit 88a20edf76091ee7f1bb459b89d714d53f0f8940 ]
The microSD card slot in the Sapphire board is not working because of
several issues:
1.- The vmmc power supply is missing in the DTS. It is capable of 3.0V
and has a GPIO-based enable control.
2.- The vqmmc power supply can provide up to 3.3V, but it is capped in
the DTS to just 3.0V because of the vmmc capability. This results in a
conflict from the mmc driver requesting an unsupportable voltage range
from 3.3V to 3.0V (min > max) as reported in dmesg. So, extend the
range up to 3.3V. The hw should be able to stand this 0.3V tolerance.
See mmc_regulator_set_vqmmc in drivers/mmc/core/core.c.
3.- The card detect signal is non-working. There is a known conflict
with jtag, but the workaround in drivers/soc/rockchip/grf.c does not
work. Adding the broken-cd attribute to the DTS fixes the issue.
Signed-off-by: Vicente Bergas <vicencb@...il.com>
Signed-off-by: Heiko Stuebner <heiko@...ech.de>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
.../boot/dts/rockchip/rk3399-sapphire.dtsi | 24 ++++++++++++++++++-
1 file changed, 23 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
index 82576011b959b..0756598477911 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
@@ -113,6 +113,19 @@
vin-supply = <&vcc_1v8>;
};
+ vcc3v0_sd: vcc3v0-sd {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_pwr_h>;
+ regulator-always-on;
+ regulator-max-microvolt = <3000000>;
+ regulator-min-microvolt = <3000000>;
+ regulator-name = "vcc3v0_sd";
+ vin-supply = <&vcc3v3_sys>;
+ };
+
vcc3v3_sys: vcc3v3-sys {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_sys";
@@ -315,7 +328,7 @@
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3000000>;
@@ -490,6 +503,13 @@
};
};
+ sd {
+ sdmmc0_pwr_h: sdmmc0-pwr-h {
+ rockchip,pins =
+ <RK_GPIO0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
usb2 {
vcc5v0_host_en: vcc5v0-host-en {
rockchip,pins =
@@ -537,6 +557,7 @@
};
&sdmmc {
+ broken-cd;
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
@@ -545,6 +566,7 @@
max-frequency = <150000000>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ vmmc-supply = <&vcc3v0_sd>;
vqmmc-supply = <&vcc_sdio>;
status = "okay";
};
--
2.20.1
Powered by blists - more mailing lists