linux-kernel - Re: [PATCH v3] input: keyboard: snvs_pwrkey: Send key events for i.MX6 S, DL and Q

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20191120092749.7rru5fj7eybs4tl6@pengutronix.de>
Date:   Wed, 20 Nov 2019 10:27:49 +0100
From:   Marco Felsch <m.felsch@...gutronix.de>
To:     Dmitry Torokhov <dmitry.torokhov@...il.com>
Cc:     Robin Gong <yibin.gong@....com>, robin <robin@...tonic.nl>,
        "linux-input @ vger . kernel . org" <linux-input@...r.kernel.org>,
        "linux-kernel @ vger . kernel . org" <linux-kernel@...r.kernel.org>,
        Pengutronix Kernel Team <kernel@...gutronix.de>,
        Shawn Guo <shawnguo@...nel.org>,
        Adam Ford <aford173@...il.com>,
        "linux-arm-kernel @ lists . infradead . org" 
        <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v3] input: keyboard: snvs_pwrkey: Send key events for
 i.MX6 S, DL and Q

Hi Robin,

On 19-09-16 16:37, Dmitry Torokhov wrote:
> On Mon, Sep 16, 2019 at 07:45:37AM +0000, Robin Gong wrote:
> > On 2019/9/13 15:31 robin <robin@...tonic.nl> wrote:> 
> > > Hi Dmitry,
> > > 
> > > On 2019-09-12 22:13, Dmitry Torokhov wrote:
> > > > Hi Robin,
> > > >
> > > > On Wed, Sep 04, 2019 at 06:23:29AM +0000, Robin van der Gracht wrote:
> > > >> The first generation i.MX6 processors does not send an interrupt when
> > > >> the power key is pressed. It sends a power down request interrupt if
> > > >> the key is released before a hard shutdown (5 second press). This
> > > >> should allow software to bring down the SoC safely.
> > > >>
> > > >> For this driver to work as a regular power key with the older SoCs,
> > > >> we need to send a keypress AND release when we get the power down
> > > >> request irq.
> > > >>
> > > >> Signed-off-by: Robin van der Gracht <robin@...tonic.nl>
> > > >> ---
> > > >> @@ -67,13 +83,17 @@ static irqreturn_t imx_snvs_pwrkey_interrupt(int
> > > >> irq, void *dev_id)  {
> > > >>  	struct platform_device *pdev = dev_id;
> > > >>  	struct pwrkey_drv_data *pdata = platform_get_drvdata(pdev);
> > > >> +	unsigned long expire = jiffies;
> > > >>  	u32 lp_status;
> > > >>
> > > >>  	pm_wakeup_event(pdata->input->dev.parent, 0);
> > > >>
> > > >>  	regmap_read(pdata->snvs, SNVS_LPSR_REG, &lp_status);
> > > >> -	if (lp_status & SNVS_LPSR_SPO)
> > > >> -		mod_timer(&pdata->check_timer, jiffies +
> > > >> msecs_to_jiffies(DEBOUNCE_TIME));
> > > >> +	if (lp_status & SNVS_LPSR_SPO) {
> > > >> +		if (pdata->minor_rev > 0)
> > > >> +			expire = jiffies + msecs_to_jiffies(DEBOUNCE_TIME);
> > > >> +		mod_timer(&pdata->check_timer, expire);
> > > >
> > > > Why do we even need to fire the timer in case of the first generation
> > > > hardware? Just send press and release events directly from the ISR.
> > That timer looks like a software debounce to prevent unexpected and
> > meaningless interrupt/event caused by quick press/release.   
> 
> Right, but in case of the first generation hardware we schedule the
> timer immediately (expire == 0) and do not check state of the hardware
> in the timer handler, but rather simply emit down/up events, so we do
> not really get any benefit from the timer (again, I am talking about
> first generation hardware only).

Did you prepared a v4? Just ask to avoid a duplicated work :)

Regards,
  Marco

> Thanks.
> 
> -- 
> Dmitry
>