| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1574257423-26754-1-git-send-email-alain.volmat@st.com>
Date: Wed, 20 Nov 2019 14:43:43 +0100
From: Alain Volmat <alain.volmat@...com>
To: <wsa@...-dreams.de>, <robh+dt@...nel.org>
CC: <mark.rutland@....com>, <pierre-yves.mordret@...com>,
<mcoquelin.stm32@...il.com>, <alexandre.torgue@...com>,
<linux-i2c@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <fabrice.gasnier@...com>
Subject: [PATCH] dt-bindings: i2c: stm32: Migrate i2c-stm32 documentation to yaml
The document was migrated to Yaml format and renamed st,stm32-i2c.yaml
Signed-off-by: Alain Volmat <alain.volmat@...com>
---
.../devicetree/bindings/i2c/i2c-stm32.txt | 65 ---------
.../devicetree/bindings/i2c/st,stm32-i2c.yaml | 157 +++++++++++++++++++++
2 files changed, 157 insertions(+), 65 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-stm32.txt
create mode 100644 Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
diff --git a/Documentation/devicetree/bindings/i2c/i2c-stm32.txt b/Documentation/devicetree/bindings/i2c/i2c-stm32.txt
deleted file mode 100644
index ce3df2fff6c8..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-stm32.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-* I2C controller embedded in STMicroelectronics STM32 I2C platform
-
-Required properties:
-- compatible: Must be one of the following
- - "st,stm32f4-i2c"
- - "st,stm32f7-i2c"
-- reg: Offset and length of the register set for the device
-- interrupts: Must contain the interrupt id for I2C event and then the
- interrupt id for I2C error.
-- resets: Must contain the phandle to the reset controller.
-- clocks: Must contain the input clock of the I2C instance.
-- A pinctrl state named "default" must be defined to set pins in mode of
- operation for I2C transfer
-- #address-cells = <1>;
-- #size-cells = <0>;
-
-Optional properties:
-- clock-frequency: Desired I2C bus clock frequency in Hz. If not specified,
- the default 100 kHz frequency will be used.
- For STM32F4 SoC Standard-mode and Fast-mode are supported, possible values are
- 100000 and 400000.
- For STM32F7, STM32H7 and STM32MP1 SoCs, Standard-mode, Fast-mode and Fast-mode
- Plus are supported, possible values are 100000, 400000 and 1000000.
-- dmas: List of phandles to rx and tx DMA channels. Refer to stm32-dma.txt.
-- dma-names: List of dma names. Valid names are: "rx" and "tx".
-- i2c-scl-rising-time-ns: I2C SCL Rising time for the board (default: 25)
- For STM32F7, STM32H7 and STM32MP1 only.
-- i2c-scl-falling-time-ns: I2C SCL Falling time for the board (default: 10)
- For STM32F7, STM32H7 and STM32MP1 only.
- I2C Timings are derived from these 2 values
-- st,syscfg-fmp: Use to set Fast Mode Plus bit within SYSCFG when Fast Mode
- Plus speed is selected by slave.
- 1st cell: phandle to syscfg
- 2nd cell: register offset within SYSCFG
- 3rd cell: register bitmask for FMP bit
- For STM32F7, STM32H7 and STM32MP1 only.
-
-Example:
-
- i2c@...05400 {
- compatible = "st,stm32f4-i2c";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x40005400 0x400>;
- interrupts = <31>,
- <32>;
- resets = <&rcc 277>;
- clocks = <&rcc 0 149>;
- pinctrl-0 = <&i2c1_sda_pin>, <&i2c1_scl_pin>;
- pinctrl-names = "default";
- };
-
- i2c@...05400 {
- compatible = "st,stm32f7-i2c";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x40005400 0x400>;
- interrupts = <31>,
- <32>;
- resets = <&rcc STM32F7_APB1_RESET(I2C1)>;
- clocks = <&rcc 1 CLK_I2C1>;
- pinctrl-0 = <&i2c1_sda_pin>, <&i2c1_scl_pin>;
- pinctrl-names = "default";
- st,syscfg-fmp = <&syscfg 0x4 0x1>;
- };
diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
new file mode 100644
index 000000000000..0f51a6ed0e9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
@@ -0,0 +1,157 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/st,stm32-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C controller embedded in STMicroelectronics STM32 I2C platform
+
+maintainers:
+ - Pierre-Yves MORDRET <pierre-yves.mordret@...com>
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - st,stm32f7-i2c
+ then:
+ properties:
+ i2c-scl-rising-time-ns:
+ description: I2C SCL Rising time for the board
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 25
+
+ i2c-scl-falling-time-ns:
+ description: I2C SCL Falling time for the board
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 10
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - st,stm32f4-i2c
+ then:
+ properties:
+ clock-frequency:
+ description: Desired I2C bus clock frequency in Hz. If not specified,
+ the default 100 kHz frequency will be used.
+ For STM32F4 SoC Standard-mode and Fast-mode are
+ supported, possible values are 100000 and 400000.
+ default: 100000
+ enum: [100000, 400000]
+ else:
+ properties:
+ clock-frequency:
+ description: Desired I2C bus clock frequency in Hz. If not specified,
+ the default 100 kHz frequency will be used.
+ For STM32F7, STM32H7 and STM32MP1 SoCs, Standard-mode,
+ Fast-mode and Fast-mode Plus are supported, possible
+ values are 100000, 400000 and 1000000.
+ default: 100000
+ enum: [100000, 400000, 1000000]
+
+ st,syscfg-fmp:
+ $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ description: Use to set Fast Mode Plus bit within SYSCFG when
+ Fast Mode Plus speed is selected by slave. Should be
+ phandle/offset/mask
+ items:
+ - description: phandle to syscfg
+ - description: register offset within syscfg
+ - description: register bitmask for FMP bit
+
+properties:
+ compatible:
+ enum:
+ - st,stm32f4-i2c
+ - st,stm32f7-i2c
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 2
+ items:
+ - description: interrupt ID for I2C event
+ - description: interrupt ID for I2C error
+
+ resets:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ dmas:
+ items:
+ - description: RX DMA Channel phandle
+ - description: TX DMA Channel phandle
+ minItems: 2
+ maxItems: 2
+
+ dma-names:
+ items:
+ - const: rx
+ - const: tx
+ minItems: 2
+ maxItems: 2
+
+required:
+ - compatible
+ - '#address-cells'
+ - '#size-cells'
+ - reg
+ - interrupts
+ - resets
+ - clocks
+
+examples:
+ - |
+ #include <dt-bindings/mfd/stm32f7-rcc.h>
+ #include <dt-bindings/clock/stm32fx-clock.h>
+ //Example 1 (with st,stm32f4-i2c compatible)
+ i2c@...05400 {
+ compatible = "st,stm32f4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x40005400 0x400>;
+ interrupts = <31>,
+ <32>;
+ resets = <&rcc 277>;
+ clocks = <&rcc 0 149>;
+ };
+
+ //Example 2 (with st,stm32f7-i2c compatible)
+ i2c@...05800 {
+ compatible = "st,stm32f7-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x40005800 0x400>;
+ interrupts = <31>,
+ <32>;
+ resets = <&rcc STM32F7_APB1_RESET(I2C1)>;
+ clocks = <&rcc 1 CLK_I2C1>;
+ };
+
+ //Example 3 (with st,stm32f7-i2c compatible on stm32mp)
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/stm32mp1-clks.h>
+ #include <dt-bindings/reset/stm32mp1-resets.h>
+ i2c@...13000 {
+ compatible = "st,stm32f7-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x40013000 0x400>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C2_K>;
+ resets = <&rcc I2C2_R>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ st,syscfg-fmp = <&syscfg 0x4 0x2>;
+ };
+...
--
2.7.4
Powered by blists - more mailing lists