lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Wed, 20 Nov 2019 15:20:38 +0100
From:   Khouloud Touil <ktouil@...libre.com>
To:     bgolaszewski@...libre.com, robh+dt@...nel.org,
        mark.rutland@....com, srinivas.kandagatla@...aro.org,
        baylibre-upstreaming@...ups.io
Cc:     linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
        linux-i2c@...r.kernel.org, linus.walleij@...aro.org,
        Khouloud Touil <ktouil@...libre.com>
Subject: [PATCH 4/4] eeprom: at24: remove the write-protect pin support

NVMEM framework is an interface for the at24 EEPROMs as well as for
other drivers, instead of passing the wp-gpios over the different
drivers each time, it would be better to pass it over the NVMEM
subsystem once and for all.

Removing the support for the write-protect pin after adding it to the
NVMEM subsystem.

Signed-off-by: Khouloud Touil <ktouil@...libre.com>
---
 drivers/misc/eeprom/at24.c | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index 2cccd82a3106..eec2a34b7051 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -22,7 +22,6 @@
 #include <linux/nvmem-provider.h>
 #include <linux/regmap.h>
 #include <linux/pm_runtime.h>
-#include <linux/gpio/consumer.h>
 
 /* Address pointer is 16 bit. */
 #define AT24_FLAG_ADDR16	BIT(7)
@@ -89,8 +88,6 @@ struct at24_data {
 
 	struct nvmem_device *nvmem;
 
-	struct gpio_desc *wp_gpio;
-
 	/*
 	 * Some chips tie up multiple I2C addresses; dummy devices reserve
 	 * them for us, and we'll use them with SMBus calls.
@@ -457,12 +454,10 @@ static int at24_write(void *priv, unsigned int off, void *val, size_t count)
 	 * from this host, but not from other I2C masters.
 	 */
 	mutex_lock(&at24->lock);
-	gpiod_set_value_cansleep(at24->wp_gpio, 0);
 
 	while (count) {
 		ret = at24_regmap_write(at24, buf, off, count);
 		if (ret < 0) {
-			gpiod_set_value_cansleep(at24->wp_gpio, 1);
 			mutex_unlock(&at24->lock);
 			pm_runtime_put(dev);
 			return ret;
@@ -472,7 +467,6 @@ static int at24_write(void *priv, unsigned int off, void *val, size_t count)
 		count -= ret;
 	}
 
-	gpiod_set_value_cansleep(at24->wp_gpio, 1);
 	mutex_unlock(&at24->lock);
 
 	pm_runtime_put(dev);
@@ -662,9 +656,6 @@ static int at24_probe(struct i2c_client *client)
 	at24->client[0].client = client;
 	at24->client[0].regmap = regmap;
 
-	at24->wp_gpio = devm_gpiod_get_optional(dev, "wp", GPIOD_OUT_HIGH);
-	if (IS_ERR(at24->wp_gpio))
-		return PTR_ERR(at24->wp_gpio);
 
 	writable = !(flags & AT24_FLAG_READONLY);
 	if (writable) {
-- 
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ