[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20191120162750.GA3279@e121166-lin.cambridge.arm.com>
Date: Wed, 20 Nov 2019 16:27:50 +0000
From: Lorenzo Pieralisi <lorenzo.pieralisi@....com>
To: Geert Uytterhoeven <geert+renesas@...der.be>,
Rob Herring <robh@...nel.org>
Cc: Bjorn Helgaas <bhelgaas@...gle.com>,
Andrew Murray <andrew.murray@....com>,
Srinath Mannam <srinath.mannam@...adcom.com>,
Gustavo Pimentel <gustavo.pimentel@...opsys.com>,
Marek Vasut <marek.vasut+renesas@...il.com>,
linux-pci@...r.kernel.org, linux-renesas-soc@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH] PCI: of: Restore alignment/indentation in host bridge
window table
On Tue, Nov 19, 2019 at 08:15:05PM +0100, Geert Uytterhoeven wrote:
> Since the printing of the inbound resources was added, alignment and
> indentation of the host bridge window table is broken because of two
> reasons:
> 1. The "IB MEM" row header is longer than the other headers,
> 2. Inbound ranges typically extend beyond 32-bit address space, and thus
> don't fit in "#010llx".
>
> Fix this by extending the row header field to 6 characters, and the
> format string to 40-bit addresses.
>
> Use "%6s" to handle field size and right-alignment, instead of manual
> preparation using error-prone snprintf() calls. Use the exact same
> format string for both cases, to allow sharing.
>
> Impact on kernel boot log on r8a7791/koelsch:
>
> rcar-pcie fe000000.pcie: host bridge /soc/pcie@...00000 ranges:
> -rcar-pcie fe000000.pcie: IO 0xfe100000..0xfe1fffff -> 0x00000000
> -rcar-pcie fe000000.pcie: MEM 0xfe200000..0xfe3fffff -> 0xfe200000
> -rcar-pcie fe000000.pcie: MEM 0x30000000..0x37ffffff -> 0x30000000
> -rcar-pcie fe000000.pcie: MEM 0x38000000..0x3fffffff -> 0x38000000
> -rcar-pcie fe000000.pcie: IB MEM 0x40000000..0xbfffffff -> 0x40000000
> -rcar-pcie fe000000.pcie: IB MEM 0x200000000..0x2ffffffff -> 0x200000000
> +rcar-pcie fe000000.pcie: IO 0x00fe100000..0x00fe1fffff -> 0x0000000000
> +rcar-pcie fe000000.pcie: MEM 0x00fe200000..0x00fe3fffff -> 0x00fe200000
> +rcar-pcie fe000000.pcie: MEM 0x0030000000..0x0037ffffff -> 0x0030000000
> +rcar-pcie fe000000.pcie: MEM 0x0038000000..0x003fffffff -> 0x0038000000
> +rcar-pcie fe000000.pcie: IB MEM 0x0040000000..0x00bfffffff -> 0x0040000000
> +rcar-pcie fe000000.pcie: IB MEM 0x0200000000..0x02ffffffff -> 0x0200000000
>
> Fixes: 52ac576f88f9f701 ("PCI: of: Add inbound resource parsing to helpers")
> Signed-off-by: Geert Uytterhoeven <geert+renesas@...der.be>
> ---
> drivers/pci/of.c | 14 +++++++-------
> 1 file changed, 7 insertions(+), 7 deletions(-)
Hi Rob,
do you mind if I squash this patch in the Fixes: above ?
Thanks,
Lorenzo
> diff --git a/drivers/pci/of.c b/drivers/pci/of.c
> index e7e12adcff3a3836..81ceeaa6f1d5a2c5 100644
> --- a/drivers/pci/of.c
> +++ b/drivers/pci/of.c
> @@ -265,7 +265,7 @@ static int devm_of_pci_get_host_bridge_resources(struct device *dev,
> struct resource *bus_range;
> struct of_pci_range range;
> struct of_pci_range_parser parser;
> - char range_type[4];
> + const char *range_type;
> int err;
>
> if (io_base)
> @@ -299,12 +299,12 @@ static int devm_of_pci_get_host_bridge_resources(struct device *dev,
> for_each_of_pci_range(&parser, &range) {
> /* Read next ranges element */
> if ((range.flags & IORESOURCE_TYPE_BITS) == IORESOURCE_IO)
> - snprintf(range_type, 4, " IO");
> + range_type = "IO";
> else if ((range.flags & IORESOURCE_TYPE_BITS) == IORESOURCE_MEM)
> - snprintf(range_type, 4, "MEM");
> + range_type = "MEM";
> else
> - snprintf(range_type, 4, "err");
> - dev_info(dev, " %s %#010llx..%#010llx -> %#010llx\n",
> + range_type = "err";
> + dev_info(dev, " %6s %#012llx..%#012llx -> %#012llx\n",
> range_type, range.cpu_addr,
> range.cpu_addr + range.size - 1, range.pci_addr);
>
> @@ -359,8 +359,8 @@ static int devm_of_pci_get_host_bridge_resources(struct device *dev,
> range.cpu_addr == OF_BAD_ADDR || range.size == 0)
> continue;
>
> - dev_info(dev, "IB MEM %#010llx..%#010llx -> %#010llx\n",
> - range.cpu_addr,
> + dev_info(dev, " %6s %#012llx..%#012llx -> %#012llx\n",
> + "IB MEM", range.cpu_addr,
> range.cpu_addr + range.size - 1, range.pci_addr);
>
>
> --
> 2.17.1
>
Powered by blists - more mailing lists