[<prev] [next>] [day] [month] [year] [list]
Message-Id: <20191121132905.29248-1-krzk@kernel.org>
Date: Thu, 21 Nov 2019 21:29:05 +0800
From: Krzysztof Kozlowski <krzk@...nel.org>
To: linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzk@...nel.org>,
Felipe Balbi <balbi@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
linux-usb@...r.kernel.org
Subject: [PATCH] usb: gadget: Fix Kconfig indentation
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>
---
drivers/usb/gadget/legacy/Kconfig | 26 +++++++++++++-------------
drivers/usb/gadget/udc/Kconfig | 6 +++---
2 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/usb/gadget/legacy/Kconfig b/drivers/usb/gadget/legacy/Kconfig
index 38eaa9417b38..119a4e47681f 100644
--- a/drivers/usb/gadget/legacy/Kconfig
+++ b/drivers/usb/gadget/legacy/Kconfig
@@ -149,21 +149,21 @@ config USB_ETH_RNDIS
is given in comments found in that info file.
config USB_ETH_EEM
- bool "Ethernet Emulation Model (EEM) support"
- depends on USB_ETH
+ bool "Ethernet Emulation Model (EEM) support"
+ depends on USB_ETH
select USB_LIBCOMPOSITE
select USB_F_EEM
- help
- CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM
- and therefore can be supported by more hardware. Technically ECM and
- EEM are designed for different applications. The ECM model extends
- the network interface to the target (e.g. a USB cable modem), and the
- EEM model is for mobile devices to communicate with hosts using
- ethernet over USB. For Linux gadgets, however, the interface with
- the host is the same (a usbX device), so the differences are minimal.
-
- If you say "y" here, the Ethernet gadget driver will use the EEM
- protocol rather than ECM. If unsure, say "n".
+ help
+ CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM
+ and therefore can be supported by more hardware. Technically ECM and
+ EEM are designed for different applications. The ECM model extends
+ the network interface to the target (e.g. a USB cable modem), and the
+ EEM model is for mobile devices to communicate with hosts using
+ ethernet over USB. For Linux gadgets, however, the interface with
+ the host is the same (a usbX device), so the differences are minimal.
+
+ If you say "y" here, the Ethernet gadget driver will use the EEM
+ protocol rather than ECM. If unsure, say "n".
config USB_G_NCM
tristate "Network Control Model (NCM) support"
diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
index acaec3ae6ad7..ae70ce29d5e4 100644
--- a/drivers/usb/gadget/udc/Kconfig
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -120,9 +120,9 @@ config USB_FOTG210_UDC
dynamically linked module called "fotg210_udc".
config USB_GR_UDC
- tristate "Aeroflex Gaisler GRUSBDC USB Peripheral Controller Driver"
- depends on HAS_DMA
- help
+ tristate "Aeroflex Gaisler GRUSBDC USB Peripheral Controller Driver"
+ depends on HAS_DMA
+ help
Select this to support Aeroflex Gaisler GRUSBDC cores from the GRLIB
VHDL IP core library.
--
2.17.1
Powered by blists - more mailing lists