| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20191121133407.29996-1-krzk@kernel.org>
Date: Thu, 21 Nov 2019 21:34:07 +0800
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Jiri Kosina <trivial@...nel.org>, linux-kernel@...r.kernel.org,
kernel-janitors@...r.kernel.org,
Thomas Gleixner <tglx@...utronix.de>,
Steven Rostedt <rostedt@...dmis.org>,
Ingo Molnar <mingo@...hat.com>,
"Peter Zijlstra (Intel)" <peterz@...radead.org>,
Will Deacon <will@...nel.org>
Cc: Krzysztof Kozlowski <krzk@...nel.org>
Subject: [PATCH] kernel: Fix Kconfig indentation
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>
---
kernel/Kconfig.locks | 8 +-
kernel/Kconfig.preempt | 6 +-
kernel/irq/Kconfig | 26 +++----
kernel/time/Kconfig | 22 +++---
kernel/trace/Kconfig | 166 ++++++++++++++++++++---------------------
5 files changed, 114 insertions(+), 114 deletions(-)
diff --git a/kernel/Kconfig.locks b/kernel/Kconfig.locks
index e0852dc333ac..d8d7a0d571a7 100644
--- a/kernel/Kconfig.locks
+++ b/kernel/Kconfig.locks
@@ -229,12 +229,12 @@ config MUTEX_SPIN_ON_OWNER
depends on SMP && ARCH_SUPPORTS_ATOMIC_RMW
config RWSEM_SPIN_ON_OWNER
- def_bool y
- depends on SMP && ARCH_SUPPORTS_ATOMIC_RMW
+ def_bool y
+ depends on SMP && ARCH_SUPPORTS_ATOMIC_RMW
config LOCK_SPIN_ON_OWNER
- def_bool y
- depends on MUTEX_SPIN_ON_OWNER || RWSEM_SPIN_ON_OWNER
+ def_bool y
+ depends on MUTEX_SPIN_ON_OWNER || RWSEM_SPIN_ON_OWNER
config ARCH_USE_QUEUED_SPINLOCKS
bool
diff --git a/kernel/Kconfig.preempt b/kernel/Kconfig.preempt
index bf82259cff96..4293e52c6cdf 100644
--- a/kernel/Kconfig.preempt
+++ b/kernel/Kconfig.preempt
@@ -75,8 +75,8 @@ config PREEMPT_RT
endchoice
config PREEMPT_COUNT
- bool
+ bool
config PREEMPTION
- bool
- select PREEMPT_COUNT
+ bool
+ select PREEMPT_COUNT
diff --git a/kernel/irq/Kconfig b/kernel/irq/Kconfig
index f92d9a687372..5621902c9921 100644
--- a/kernel/irq/Kconfig
+++ b/kernel/irq/Kconfig
@@ -4,11 +4,11 @@ menu "IRQ subsystem"
# Make sparse irq Kconfig switch below available
config MAY_HAVE_SPARSE_IRQ
- bool
+ bool
# Legacy support, required for itanic
config GENERIC_IRQ_LEGACY
- bool
+ bool
# Enable the generic irq autoprobe mechanism
config GENERIC_IRQ_PROBE
@@ -16,20 +16,20 @@ config GENERIC_IRQ_PROBE
# Use the generic /proc/interrupts implementation
config GENERIC_IRQ_SHOW
- bool
+ bool
# Print level/edge extra information
config GENERIC_IRQ_SHOW_LEVEL
- bool
+ bool
# Supports effective affinity mask
config GENERIC_IRQ_EFFECTIVE_AFF_MASK
- bool
+ bool
# Facility to allocate a hardware interrupt. This is legacy support
# and should not be used in new code. Use irq domains instead.
config GENERIC_IRQ_LEGACY_ALLOC_HWIRQ
- bool
+ bool
# Support for delayed migration from interrupt context
config GENERIC_PENDING_IRQ
@@ -41,24 +41,24 @@ config GENERIC_IRQ_MIGRATION
# Alpha specific irq affinity mechanism
config AUTO_IRQ_AFFINITY
- bool
+ bool
# Tasklet based software resend for pending interrupts on enable_irq()
config HARDIRQS_SW_RESEND
- bool
+ bool
# Preflow handler support for fasteoi (sparc64)
config IRQ_PREFLOW_FASTEOI
- bool
+ bool
# Edge style eoi based handler (cell)
config IRQ_EDGE_EOI_HANDLER
- bool
+ bool
# Generic configurable interrupt chip implementation
config GENERIC_IRQ_CHIP
- bool
- select IRQ_DOMAIN
+ bool
+ select IRQ_DOMAIN
# Generic irq_domain hw <--> linux irq number translation
config IRQ_DOMAIN
@@ -109,7 +109,7 @@ config GENERIC_IRQ_RESERVATION_MODE
# Support forced irq threading
config IRQ_FORCED_THREADING
- bool
+ bool
config SPARSE_IRQ
bool "Support sparse irq numbering" if MAY_HAVE_SPARSE_IRQ
diff --git a/kernel/time/Kconfig b/kernel/time/Kconfig
index fcc42353f125..610d56ccb4da 100644
--- a/kernel/time/Kconfig
+++ b/kernel/time/Kconfig
@@ -102,24 +102,24 @@ config NO_HZ_FULL
select IRQ_WORK
select CPU_ISOLATION
help
- Adaptively try to shutdown the tick whenever possible, even when
- the CPU is running tasks. Typically this requires running a single
- task on the CPU. Chances for running tickless are maximized when
- the task mostly runs in userspace and has few kernel activity.
+ Adaptively try to shutdown the tick whenever possible, even when
+ the CPU is running tasks. Typically this requires running a single
+ task on the CPU. Chances for running tickless are maximized when
+ the task mostly runs in userspace and has few kernel activity.
- You need to fill up the nohz_full boot parameter with the
- desired range of dynticks CPUs.
+ You need to fill up the nohz_full boot parameter with the
+ desired range of dynticks CPUs.
- This is implemented at the expense of some overhead in user <-> kernel
- transitions: syscalls, exceptions and interrupts. Even when it's
- dynamically off.
+ This is implemented at the expense of some overhead in user <-> kernel
+ transitions: syscalls, exceptions and interrupts. Even when it's
+ dynamically off.
- Say N.
+ Say N.
endchoice
config CONTEXT_TRACKING
- bool
+ bool
config CONTEXT_TRACKING_FORCE
bool "Force context tracking"
diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
index f67620499faa..dbcee0257416 100644
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -73,9 +73,9 @@ config RING_BUFFER
select IRQ_WORK
config FTRACE_NMI_ENTER
- bool
- depends on HAVE_FTRACE_NMI_ENTER
- default y
+ bool
+ depends on HAVE_FTRACE_NMI_ENTER
+ default y
config EVENT_TRACING
select CONTEXT_SWITCH_TRACER
@@ -88,8 +88,8 @@ config CONTEXT_SWITCH_TRACER
config RING_BUFFER_ALLOW_SWAP
bool
help
- Allow the use of ring_buffer_swap_cpu.
- Adds a very slight overhead to tracing when enabled.
+ Allow the use of ring_buffer_swap_cpu.
+ Adds a very slight overhead to tracing when enabled.
config PREEMPTIRQ_TRACEPOINTS
bool
@@ -252,36 +252,36 @@ config HWLAT_TRACER
bool "Tracer to detect hardware latencies (like SMIs)"
select GENERIC_TRACER
help
- This tracer, when enabled will create one or more kernel threads,
- depending on what the cpumask file is set to, which each thread
- spinning in a loop looking for interruptions caused by
- something other than the kernel. For example, if a
- System Management Interrupt (SMI) takes a noticeable amount of
- time, this tracer will detect it. This is useful for testing
- if a system is reliable for Real Time tasks.
+ This tracer, when enabled will create one or more kernel threads,
+ depending on what the cpumask file is set to, which each thread
+ spinning in a loop looking for interruptions caused by
+ something other than the kernel. For example, if a
+ System Management Interrupt (SMI) takes a noticeable amount of
+ time, this tracer will detect it. This is useful for testing
+ if a system is reliable for Real Time tasks.
- Some files are created in the tracing directory when this
- is enabled:
+ Some files are created in the tracing directory when this
+ is enabled:
- hwlat_detector/width - time in usecs for how long to spin for
- hwlat_detector/window - time in usecs between the start of each
+ hwlat_detector/width - time in usecs for how long to spin for
+ hwlat_detector/window - time in usecs between the start of each
iteration
- A kernel thread is created that will spin with interrupts disabled
- for "width" microseconds in every "window" cycle. It will not spin
- for "window - width" microseconds, where the system can
- continue to operate.
+ A kernel thread is created that will spin with interrupts disabled
+ for "width" microseconds in every "window" cycle. It will not spin
+ for "window - width" microseconds, where the system can
+ continue to operate.
- The output will appear in the trace and trace_pipe files.
+ The output will appear in the trace and trace_pipe files.
- When the tracer is not running, it has no affect on the system,
- but when it is running, it can cause the system to be
- periodically non responsive. Do not run this tracer on a
- production system.
+ When the tracer is not running, it has no affect on the system,
+ but when it is running, it can cause the system to be
+ periodically non responsive. Do not run this tracer on a
+ production system.
- To enable this tracer, echo in "hwlat" into the current_tracer
- file. Every time a latency is greater than tracing_thresh, it will
- be recorded into the ring buffer.
+ To enable this tracer, echo in "hwlat" into the current_tracer
+ file. Every time a latency is greater than tracing_thresh, it will
+ be recorded into the ring buffer.
config ENABLE_DEFAULT_TRACERS
bool "Trace process context switches and events"
@@ -339,18 +339,18 @@ choice
prompt "Branch Profiling"
default BRANCH_PROFILE_NONE
help
- The branch profiling is a software profiler. It will add hooks
- into the C conditionals to test which path a branch takes.
+ The branch profiling is a software profiler. It will add hooks
+ into the C conditionals to test which path a branch takes.
- The likely/unlikely profiler only looks at the conditions that
- are annotated with a likely or unlikely macro.
+ The likely/unlikely profiler only looks at the conditions that
+ are annotated with a likely or unlikely macro.
- The "all branch" profiler will profile every if-statement in the
- kernel. This profiler will also enable the likely/unlikely
- profiler.
+ The "all branch" profiler will profile every if-statement in the
+ kernel. This profiler will also enable the likely/unlikely
+ profiler.
- Either of the above profilers adds a bit of overhead to the system.
- If unsure, choose "No branch profiling".
+ Either of the above profilers adds a bit of overhead to the system.
+ If unsure, choose "No branch profiling".
config BRANCH_PROFILE_NONE
bool "No branch profiling"
@@ -585,8 +585,8 @@ config BPF_KPROBE_OVERRIDE
depends on FUNCTION_ERROR_INJECTION
default n
help
- Allows BPF to override the execution of a probed function and
- set a different return value. This is used for error injection.
+ Allows BPF to override the execution of a probed function and
+ set a different return value. This is used for error injection.
config FTRACE_MCOUNT_RECORD
def_bool y
@@ -620,13 +620,13 @@ config EVENT_TRACE_TEST_SYSCALLS
bool "Run selftest on syscall events"
depends on EVENT_TRACE_STARTUP_TEST
help
- This option will also enable testing every syscall event.
- It only enables the event and disables it and runs various loads
- with the event enabled. This adds a bit more time for kernel boot
- up since it runs this on every system call defined.
+ This option will also enable testing every syscall event.
+ It only enables the event and disables it and runs various loads
+ with the event enabled. This adds a bit more time for kernel boot
+ up since it runs this on every system call defined.
- TBD - enable a way to actually call the syscalls as we test their
- events
+ TBD - enable a way to actually call the syscalls as we test their
+ events
config MMIOTRACE
bool "Memory mapped IO tracing"
@@ -685,22 +685,22 @@ config MMIOTRACE_TEST
config TRACEPOINT_BENCHMARK
bool "Add tracepoint that benchmarks tracepoints"
help
- This option creates the tracepoint "benchmark:benchmark_event".
- When the tracepoint is enabled, it kicks off a kernel thread that
- goes into an infinite loop (calling cond_sched() to let other tasks
- run), and calls the tracepoint. Each iteration will record the time
- it took to write to the tracepoint and the next iteration that
- data will be passed to the tracepoint itself. That is, the tracepoint
- will report the time it took to do the previous tracepoint.
- The string written to the tracepoint is a static string of 128 bytes
- to keep the time the same. The initial string is simply a write of
- "START". The second string records the cold cache time of the first
- write which is not added to the rest of the calculations.
+ This option creates the tracepoint "benchmark:benchmark_event".
+ When the tracepoint is enabled, it kicks off a kernel thread that
+ goes into an infinite loop (calling cond_sched() to let other tasks
+ run), and calls the tracepoint. Each iteration will record the time
+ it took to write to the tracepoint and the next iteration that
+ data will be passed to the tracepoint itself. That is, the tracepoint
+ will report the time it took to do the previous tracepoint.
+ The string written to the tracepoint is a static string of 128 bytes
+ to keep the time the same. The initial string is simply a write of
+ "START". The second string records the cold cache time of the first
+ write which is not added to the rest of the calculations.
- As it is a tight loop, it benchmarks as hot cache. That's fine because
- we care most about hot paths that are probably in cache already.
+ As it is a tight loop, it benchmarks as hot cache. That's fine because
+ we care most about hot paths that are probably in cache already.
- An example of the output:
+ An example of the output:
START
first=3672 [COLD CACHED]
@@ -729,27 +729,27 @@ config RING_BUFFER_BENCHMARK
If unsure, say N.
config RING_BUFFER_STARTUP_TEST
- bool "Ring buffer startup self test"
- depends on RING_BUFFER
- help
- Run a simple self test on the ring buffer on boot up. Late in the
- kernel boot sequence, the test will start that kicks off
- a thread per cpu. Each thread will write various size events
- into the ring buffer. Another thread is created to send IPIs
- to each of the threads, where the IPI handler will also write
- to the ring buffer, to test/stress the nesting ability.
- If any anomalies are discovered, a warning will be displayed
- and all ring buffers will be disabled.
-
- The test runs for 10 seconds. This will slow your boot time
- by at least 10 more seconds.
-
- At the end of the test, statics and more checks are done.
- It will output the stats of each per cpu buffer. What
- was written, the sizes, what was read, what was lost, and
- other similar details.
-
- If unsure, say N
+ bool "Ring buffer startup self test"
+ depends on RING_BUFFER
+ help
+ Run a simple self test on the ring buffer on boot up. Late in the
+ kernel boot sequence, the test will start that kicks off
+ a thread per cpu. Each thread will write various size events
+ into the ring buffer. Another thread is created to send IPIs
+ to each of the threads, where the IPI handler will also write
+ to the ring buffer, to test/stress the nesting ability.
+ If any anomalies are discovered, a warning will be displayed
+ and all ring buffers will be disabled.
+
+ The test runs for 10 seconds. This will slow your boot time
+ by at least 10 more seconds.
+
+ At the end of the test, statics and more checks are done.
+ It will output the stats of each per cpu buffer. What
+ was written, the sizes, what was read, what was lost, and
+ other similar details.
+
+ If unsure, say N
config PREEMPTIRQ_DELAY_TEST
tristate "Preempt / IRQ disable delay thread to test latency tracers"
@@ -767,9 +767,9 @@ config PREEMPTIRQ_DELAY_TEST
If unsure, say N
config TRACE_EVAL_MAP_FILE
- bool "Show eval mappings for trace events"
- depends on TRACING
- help
+ bool "Show eval mappings for trace events"
+ depends on TRACING
+ help
The "print fmt" of the trace events will show the enum/sizeof names
instead of their values. This can cause problems for user space tools
that use this string to parse the raw data as user space does not know
--
2.17.1
Powered by blists - more mailing lists