| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4ff7631f-fbb7-e45f-87dd-9223beca4da7@huawei.com>
Date: Thu, 21 Nov 2019 15:23:42 +0000
From: John Garry <john.garry@...wei.com>
To: Robert Richter <rrichter@...vell.com>
CC: Borislav Petkov <bp@...en8.de>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
James Morse <james.morse@....com>,
"tony.luck@...el.com" <tony.luck@...el.com>,
"linux-edac@...r.kernel.org" <linux-edac@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
wanghuiqiang <wanghuiqiang@...wei.com>,
Xiaofei Tan <tanxiaofei@...wei.com>,
Linuxarm <linuxarm@...wei.com>,
"Huangming (Mark)" <huangming23@...wei.com>
Subject: Re: linuxnext-2019119 edac warns (was Re: edac KASAN warning in
experimental arm64 allmodconfig boot)
On 21/11/2019 14:23, Robert Richter wrote:
> Hi John,
>
> thanks for testing and reporting this. See inline.
>
> On 21.11.19 12:34:22, John Garry wrote:
>> On 14/10/2019 16:18, John Garry wrote:
>> JFYI, I see an issue on linuxnext-2019119, as follows:
>>
>> 21.645388] io scheduler kyber registered
>> [ 21.734011] input: Power Button as
>> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>> [ 21.743295] ACPI: Power Button [PWRB]
>> [ 21.809644] [Firmware Bug]: APEI: Invalid bit width + offset in GAR
>> [0x94110034/64/0/3/0]
>> [ 21.821974] EDAC MC0: Giving out device to module ghes_edac.c controller
>> ghes_edac: DEV ghes (INTERRUPT)
>> [ 21.831763] ------------[ cut here ]------------
>> [ 21.836374] refcount_t: increment on 0; use-after-free.
>> [ 21.841620] WARNING: CPU: 36 PID: 1 at lib/refcount.c:156
>> refcount_inc_checked+0x44/0x50
>> [ 21.849697] Modules linked in:
>> [ 21.852745] CPU: 36 PID: 1 Comm: swapper/0 Not tainted
>> 5.4.0-rc8-next-20191119-00003-g141a9fef5092-dirty #650
>> [ 21.862645] Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0 -
>> V1.16.01 03/15/2019
>> [ 21.871157] pstate: 60c00009 (nZCv daif +PAN +UAO)
>> [ 21.875936] pc : refcount_inc_checked+0x44/0x50
>> [ 21.880455] lr : refcount_inc_checked+0x44/0x50
>
> This is a warning from the refcount framework. It warns if we
> increment from zero. This is reasonable as typically a kernel object
> is created with a refcount of 1 and thrown away once the refcount is
> zero. Afterwards the object is used-after-free.
>
> For ghes the refcount is initialized with zero, and that is why we see
> this message. However, we protect the refcount with the ghes_reg_mutex
> and thus there is no use after free. The device is allocated and
> registered if the refcount is zero. So this works fine.
>
> Enclosed a fix that avoids the warning, please test.
>
> But see below...
>
>> [ 21.884972] sp : ffff00236ffbf8a0
>> [ 21.888274] x29: ffff00236ffbf8a0 x28: 0000000000000002
>> [ 21.893576] x27: ffff00236cd07900 x26: ffff002369063010
>> [ 21.898876] x25: 0000000000000000 x24: ffff00233c236824
>> [ 21.904177] x23: ffffa000137b9000 x22: ffffa00016fbb7c0
>> [ 21.909477] x21: ffffa00012dfd000 x20: 1fffe0046dff7f24
>> [ 21.914777] x19: ffff00233c236000 x18: 0000000000000000
>> [ 21.920077] x17: 0000000000000000 x16: 0000000000000000
>> [ 21.925377] x15: 0000000000007700 x14: 64655f7365686720
>> [ 21.930677] x13: 72656c6c6f72746e x12: 1ffff40002719618
>> [ 21.935977] x11: ffff940002719618 x10: dfffa00000000000
>> [ 21.941278] x9 : ffff940002719619 x8 : 0000000000000001
>> [ 21.946578] x7 : 0000000000000000 x6 : 0000000000000001
>> [ 21.951877] x5 : ffff940002719618 x4 : ffff00236ffb0010
>> [ 21.957178] x3 : ffffa000112415e4 x2 : ffff80046dff7ede
>> [ 21.962478] x1 : 5aff78756b1cf400 x0 : 0000000000000000
>> [ 21.967779] Call trace:
>> [ 21.970214] refcount_inc_checked+0x44/0x50
>> [ 21.974389] ghes_edac_register+0x258/0x388
>> [ 21.978562] ghes_probe+0x28c/0x5f0
>> [ 21.982041] platform_drv_probe+0x70/0xd8
>> [ 21.986039] really_probe+0x174/0x468
>> [ 21.989690] driver_probe_device+0x7c/0x148
>> [ 21.993862] device_driver_attach+0x94/0xa0
>> [ 21.998033] __driver_attach+0xa4/0x110
>> [ 22.001857] bus_for_each_dev+0xe8/0x158
>> [ 22.005768] driver_attach+0x30/0x40
>> [ 22.009331] bus_add_driver+0x234/0x2f0
>> [ 22.013156] driver_register+0xbc/0x1d0
>> [ 22.016981] __platform_driver_register+0x7c/0x88
>> [ 22.021675] ghes_init+0xbc/0x14c
>> [ 22.024979] do_one_initcall+0xb4/0x254
>> [ 22.028805] kernel_init_freeable+0x248/0x2f4
>> [ 22.033151] kernel_init+0x10/0x118
>> [ 22.036628] ret_from_fork+0x10/0x18
>> [ 22.040194] ---[ end trace 33655bb65a9835fe ]---
>> [ 22.046666] EDAC MC: bug in low-level driver: attempt to assign
>> [ 22.046666] duplicate mc_idx 0 in add_mc_to_global_list()
>> [ 22.058311] ghes_edac: Can't register at EDAC core
>> [ 22.065402] EDAC MC: bug in low-level driver: attempt to assign
>> [ 22.065402] duplicate mc_idx 0 in add_mc_to_global_list()
>> [ 22.077080] ghes_edac: Can't register at EDAC core
>> [ 22.084140] EDAC MC: bug in low-level driver: attempt to assign
>> [ 22.084140] duplicate mc_idx 0 in add_mc_to_global_list()
>> [ 22.095789] ghes_edac: Can't register at EDAC core
>> [ 22.102873] EDAC MC: bug in low-level driver: attempt to assign
>> [ 22.102873] duplicate mc_idx 0 in add_mc_to_global_list()
>> [ 22.115442] ghes_edac: Can't register at EDAC core
>> [ 22.122536] EDAC MC: bug in low-level driver: attempt to assign
>> [ 22.122536] duplicate mc_idx 0 in add_mc_to_global_list()
>> [ 22.134344] ghes_edac: Can't register at EDAC core
>> [ 22.141441] EDAC MC: bug in low-level driver: attempt to assign
>> [ 22.141441] duplicate mc_idx 0 in add_mc_to_global_list()
>> [ 22.153089] ghes_edac: Can't register at EDAC core
>> [ 22.160161] EDAC MC: bug in low-level driver: attempt to assign
>> [ 22.160161] duplicate mc_idx 0 in add_mc_to_global_list()
>> [ 22.171810] ghes_edac: Can't register at EDAC core
>
> What I am more concerned is this here. In total this implies 8 ghes
> users that all try to register a (single-instance) ghes mc device. For
> non-x86 only one instance is allowed (see ghes_edac_register(), idx =
> 0).
>
[cc some guys about HEST]
> So on your platform, when parsing the HEST table
> (hest_ghes_dev_register()), more than one "GHES" device is parsed,
> allocated and registered. Mind sending me your HEST table
> (/sys/firmware/acpi/tables/HEST), or explain what happens here?
I think that this should be the same:
https://github.com/tianocore/edk2-platforms/tree/master/Silicon/Hisilicon/Hi1620/Drivers/Apei/Hest
If
> this is a valid use case, we need to change ghes_edac_register() to
> support more than one instance.
>
> Again, please try the patch below.
>
> Thanks,
>
> -Robert
>
>
>>>From 6962f8af4a7c1051c9e87a5ac60571f70d2b6814 Mon Sep 17 00:00:00 2001
> From: Robert Richter <rrichter@...vell.com>
> Date: Thu, 21 Nov 2019 15:01:28 +0100
> Subject: [PATCH] EDAC/ghes: Do not warn on when increment refcount on 0
>
> Signed-off-by: Robert Richter <rrichter@...vell.com>
> ---
> drivers/edac/ghes_edac.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/edac/ghes_edac.c b/drivers/edac/ghes_edac.c
> index 47f4e7f90ef0..b99080d8a10c 100644
> --- a/drivers/edac/ghes_edac.c
> +++ b/drivers/edac/ghes_edac.c
> @@ -556,8 +556,8 @@ int ghes_edac_register(struct ghes *ghes, struct device *dev)
> ghes_pvt = pvt;
> spin_unlock_irqrestore(&ghes_lock, flags);
>
> - /* only increment on success */
> - refcount_inc(&ghes_refcount);
> + /* only set on success */
> + refcount_set(&ghes_refcount, 1);
Yep, that seems to have silenced it all:
[ 21.739895] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 21.749848] ACPI: Power Button [PWRB]
[ 21.816977] [Firmware Bug]: APEI: Invalid bit width + offset in GAR
[0x94110034/64/0/3/0]
[ 21.827880] EDAC MC0: Giving out device to module ghes_edac.c
controller ghes_edac: DEV ghes (INTERRUPT)
[ 21.841313] GHES: APEI firmware first mode is enabled by APEI bit and
WHEA _OSC.
[ 21.849176] EINJ: Error INJection is initialized.
[ 21.855135] ACPI GTDT: found 1 SBSA generic Watchdog(s).
Thanks,
John
>
> unlock:
> mutex_unlock(&ghes_reg_mutex);
>
Cheers,
John
Powered by blists - more mailing lists