| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20191122054838.GU82508@vkoul-mobl>
Date: Fri, 22 Nov 2019 11:18:38 +0530
From: Vinod Koul <vkoul@...nel.org>
To: Chuhong Yuan <hslester96@...il.com>,
Peter Ujfalusi <peter.ujfalusi@...com>
Cc: Dan Williams <dan.j.williams@...el.com>, dmaengine@...r.kernel.org,
LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 1/2] dmaengine: ti: edma: add missed pm_runtime_disable
On 22-11-19, 13:39, Chuhong Yuan wrote:
> On Fri, Nov 22, 2019 at 1:23 PM Vinod Koul <vkoul@...nel.org> wrote:
> >
> > On 18-11-19, 15:37, Chuhong Yuan wrote:
> > > The driver forgets to call pm_runtime_disable in probe failure and
> > > remove.
> > > Add the calls and modify probe failure handling to fix it.
> > >
> > > Fixes: 2b6b3b742019 ("ARM/dmaengine: edma: Merge the two drivers under drivers/dma/")
> > > Signed-off-by: Chuhong Yuan <hslester96@...il.com>
> > > ---
> > > drivers/dma/ti/edma.c | 43 ++++++++++++++++++++++++++++---------------
> > > 1 file changed, 28 insertions(+), 15 deletions(-)
> > >
> > > diff --git a/drivers/dma/ti/edma.c b/drivers/dma/ti/edma.c
> > > index ba7c4f07fcd6..8be32fd9f762 100644
> > > --- a/drivers/dma/ti/edma.c
> > > +++ b/drivers/dma/ti/edma.c
> > > @@ -2282,16 +2282,18 @@ static int edma_probe(struct platform_device *pdev)
> > > ret = pm_runtime_get_sync(dev);
> > > if (ret < 0) {
> > > dev_err(dev, "pm_runtime_get_sync() failed\n");
> > > - return ret;
> > > + goto err_disable_pm;
> >
> > Why would you disable here when sync has returned error?
> >
>
> Since pm_runtime_enable is called before sync, we cannot directly return
> without disabling it as the original implementation does.
Ok You should have cced Peter and TI folks on this. get_mainatiner.pl is
your friend, use it!
Peter care to test/review this.
>
> > > }
> > >
> > > ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
> > > if (ret)
> > > - return ret;
> > > + goto err_disable_pm;
> > >
> > > ecc = devm_kzalloc(dev, sizeof(*ecc), GFP_KERNEL);
> > > - if (!ecc)
> > > - return -ENOMEM;
> > > + if (!ecc) {
> > > + ret = -ENOMEM;
> > > + goto err_disable_pm;
> > > + }
> > >
> > > ecc->dev = dev;
> > > ecc->id = pdev->id;
> > > @@ -2306,30 +2308,37 @@ static int edma_probe(struct platform_device *pdev)
> > > mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > > if (!mem) {
> > > dev_err(dev, "no mem resource?\n");
> > > - return -ENODEV;
> > > + ret = -ENODEV;
> > > + goto err_disable_pm;
> > > }
> > > }
> > > ecc->base = devm_ioremap_resource(dev, mem);
> > > - if (IS_ERR(ecc->base))
> > > - return PTR_ERR(ecc->base);
> > > + if (IS_ERR(ecc->base)) {
> > > + ret = PTR_ERR(ecc->base);
> > > + goto err_disable_pm;
> > > + }
> > >
> > > platform_set_drvdata(pdev, ecc);
> > >
> > > /* Get eDMA3 configuration from IP */
> > > ret = edma_setup_from_hw(dev, info, ecc);
> > > if (ret)
> > > - return ret;
> > > + goto err_disable_pm;
> > >
> > > /* Allocate memory based on the information we got from the IP */
> > > ecc->slave_chans = devm_kcalloc(dev, ecc->num_channels,
> > > sizeof(*ecc->slave_chans), GFP_KERNEL);
> > > - if (!ecc->slave_chans)
> > > - return -ENOMEM;
> > > + if (!ecc->slave_chans) {
> > > + ret = -ENOMEM;
> > > + goto err_disable_pm;
> > > + }
> > >
> > > ecc->slot_inuse = devm_kcalloc(dev, BITS_TO_LONGS(ecc->num_slots),
> > > sizeof(unsigned long), GFP_KERNEL);
> > > - if (!ecc->slot_inuse)
> > > - return -ENOMEM;
> > > + if (!ecc->slot_inuse) {
> > > + ret = -ENOMEM;
> > > + goto err_disable_pm;
> > > + }
> > >
> > > ecc->default_queue = info->default_queue;
> > >
> > > @@ -2368,7 +2377,7 @@ static int edma_probe(struct platform_device *pdev)
> > > ecc);
> > > if (ret) {
> > > dev_err(dev, "CCINT (%d) failed --> %d\n", irq, ret);
> > > - return ret;
> > > + goto err_disable_pm;
> > > }
> > > ecc->ccint = irq;
> > > }
> > > @@ -2384,7 +2393,7 @@ static int edma_probe(struct platform_device *pdev)
> > > ecc);
> > > if (ret) {
> > > dev_err(dev, "CCERRINT (%d) failed --> %d\n", irq, ret);
> > > - return ret;
> > > + goto err_disable_pm;
> > > }
> > > ecc->ccerrint = irq;
> > > }
> > > @@ -2392,7 +2401,8 @@ static int edma_probe(struct platform_device *pdev)
> > > ecc->dummy_slot = edma_alloc_slot(ecc, EDMA_SLOT_ANY);
> > > if (ecc->dummy_slot < 0) {
> > > dev_err(dev, "Can't allocate PaRAM dummy slot\n");
> > > - return ecc->dummy_slot;
> > > + ret = ecc->dummy_slot;
> > > + goto err_disable_pm;
> > > }
> > >
> > > queue_priority_mapping = info->queue_priority_mapping;
> > > @@ -2473,6 +2483,8 @@ static int edma_probe(struct platform_device *pdev)
> > >
> > > err_reg1:
> > > edma_free_slot(ecc, ecc->dummy_slot);
> > > +err_disable_pm:
> > > + pm_runtime_disable(dev);
> > > return ret;
> > > }
> > >
> > > @@ -2503,6 +2515,7 @@ static int edma_remove(struct platform_device *pdev)
> > > if (ecc->dma_memcpy)
> > > dma_async_device_unregister(ecc->dma_memcpy);
> > > edma_free_slot(ecc, ecc->dummy_slot);
> > > + pm_runtime_disable(dev);
> > >
> > > return 0;
> > > }
> > > --
> > > 2.24.0
> >
> > --
> > ~Vinod
--
~Vinod
Powered by blists - more mailing lists