linux-kernel - [PATCH AUTOSEL 4.9 01/91] scsi: lpfc: Fix dif and first burst use in write commands

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20191122060129.4239-1-sashal@kernel.org>
Date:   Fri, 22 Nov 2019 01:00:00 -0500
From:   Sasha Levin <sashal@...nel.org>
To:     linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc:     James Smart <jsmart2021@...il.com>,
        Dick Kennedy <dick.kennedy@...adcom.com>,
        "Martin K . Petersen" <martin.petersen@...cle.com>,
        Sasha Levin <sashal@...nel.org>, linux-scsi@...r.kernel.org
Subject: [PATCH AUTOSEL 4.9 01/91] scsi: lpfc: Fix dif and first burst use in write commands

From: James Smart <jsmart2021@...il.com>

[ Upstream commit 7c4042a4d0b7532cfbc90478fd3084b2dab5849e ]

When dif and first burst is used in a write command wqe, the driver was not
properly setting fields in the io command request. This resulted in no dif
bytes being sent and invalid xfer_rdy's, resulting in the io being aborted
by the hardware.

Correct the wqe initializaton when both dif and first burst are used.

Signed-off-by: Dick Kennedy <dick.kennedy@...adcom.com>
Signed-off-by: James Smart <jsmart2021@...il.com>
Signed-off-by: Martin K. Petersen <martin.petersen@...cle.com>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 drivers/scsi/lpfc/lpfc_scsi.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index d197aa176dee3..d489cc1018b5c 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -2707,6 +2707,7 @@ lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba,
 	int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction;
 	int prot_group_type = 0;
 	int fcpdl;
+	struct lpfc_vport *vport = phba->pport;
 
 	/*
 	 * Start the lpfc command prep by bumping the bpl beyond fcp_cmnd
@@ -2812,6 +2813,14 @@ lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba,
 	 */
 	iocb_cmd->un.fcpi.fcpi_parm = fcpdl;
 
+	/*
+	 * For First burst, we may need to adjust the initial transfer
+	 * length for DIF
+	 */
+	if (iocb_cmd->un.fcpi.fcpi_XRdy &&
+	    (fcpdl < vport->cfg_first_burst_size))
+		iocb_cmd->un.fcpi.fcpi_XRdy = fcpdl;
+
 	return 0;
 err:
 	if (lpfc_cmd->seg_cnt)
@@ -3364,6 +3373,7 @@ lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba,
 	int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction;
 	int prot_group_type = 0;
 	int fcpdl;
+	struct lpfc_vport *vport = phba->pport;
 
 	/*
 	 * Start the lpfc command prep by bumping the sgl beyond fcp_cmnd
@@ -3479,6 +3489,14 @@ lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba,
 	 */
 	iocb_cmd->un.fcpi.fcpi_parm = fcpdl;
 
+	/*
+	 * For First burst, we may need to adjust the initial transfer
+	 * length for DIF
+	 */
+	if (iocb_cmd->un.fcpi.fcpi_XRdy &&
+	    (fcpdl < vport->cfg_first_burst_size))
+		iocb_cmd->un.fcpi.fcpi_XRdy = fcpdl;
+
 	/*
 	 * If the OAS driver feature is enabled and the lun is enabled for
 	 * OAS, set the oas iocb related flags.
-- 
2.20.1