[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAPDyKFokY52H4WO7TZHqfUu46U85dOV6FMp1QeY_ivUpfgS2sw@mail.gmail.com>
Date: Fri, 22 Nov 2019 08:44:36 +0100
From: Ulf Hansson <ulf.hansson@...aro.org>
To: Manish Narani <manish.narani@...inx.com>
Cc: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
"linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
DTML <devicetree@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
git@...inx.com
Subject: Re: [PATCH] dt-bindings: mmc: Correct the type of the clk phase properties
On Fri, 22 Nov 2019 at 08:16, Manish Narani <manish.narani@...inx.com> wrote:
>
> The clock phase properties are having two uint32 values. The minItems
> and maxItems are set to 2 for the same. So the property type should be
> 'uint32-array' and not 'uint32'. Modify it to correct the same.
>
> Reported-by: Rob Herring <robh@...nel.org>
> Signed-off-by: Manish Narani <manish.narani@...inx.com>
Applied for next, thanks!
Kind regards
Uffe
> ---
> .../devicetree/bindings/mmc/mmc-controller.yaml | 17 +++++++++--------
> 1 file changed, 9 insertions(+), 8 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
> index 305b2016bc17..b130450c3b34 100644
> --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
> +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
> @@ -334,16 +334,17 @@ patternProperties:
> - reg
>
> "^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|uhs-(sdr(12|25|50|104)|ddr50))$":
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32-array
> minItems: 2
> maxItems: 2
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - minimum: 0
> - maximum: 359
> - description:
> - Set the clock (phase) delays which are to be configured in the
> - controller while switching to particular speed mode. These values
> - are in pair of degrees.
> + items:
> + minimum: 0
> + maximum: 359
> + description:
> + Set the clock (phase) delays which are to be configured in the
> + controller while switching to particular speed mode. These values
> + are in pair of degrees.
>
> dependencies:
> cd-debounce-delay-ms: [ cd-gpios ]
> --
> 2.17.1
>
Powered by blists - more mailing lists