| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20191123203759.20708-4-afaerber@suse.de>
Date: Sat, 23 Nov 2019 21:37:54 +0100
From: Andreas Färber <afaerber@...e.de>
To: linux-realtek-soc@...ts.infradead.org
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Andreas Färber <afaerber@...e.de>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>, devicetree@...r.kernel.org
Subject: [PATCH v4 3/8] ARM: dts: Prepare Realtek RTD1195 and MeLE X1000
Add Device Trees for Realtek RTD1195 SoC and MeLE X1000 TV box.
Reuse the existing RTD1295 watchdog compatible for now.
Reviewed-by: Rob Herring <robh@...nel.org>
[AF: Fixed r-bus size, fixed GIC, updated memreserve & memory]
Signed-off-by: Andreas Färber <afaerber@...e.de>
---
v3 -> v4:
* Inserted /memory reg entry to compensate reduced r-bus size (James)
* Extended GIC reg and added interrupt (Marc)
* Added comments to /memory node
v2 -> v3:
* Fixed r-bus size in /soc ranges from 0x1000000 to 0x70000 (James)
* Adjusted /memreserve/ to close gap from 0xa800 to 0xc000 for full 0x100000
* Changed arch timer from GIC_CPU_MASK_RAW(0xf) to GIC_CPU_MASK_SIMPLE(2)
squashed from RTD1395 v1 series
v1 -> v2:
* Dropped /memreserve/ and reserved-memory nodes for peripherals and NOR (Rob)
* Carved them out from memory reg instead (Rob)
* Converted some /memreserve/s to reserved-memory nodes
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/rtd1195-mele-x1000.dts | 32 ++++++++
arch/arm/boot/dts/rtd1195.dtsi | 130 +++++++++++++++++++++++++++++++
3 files changed, 164 insertions(+)
create mode 100644 arch/arm/boot/dts/rtd1195-mele-x1000.dts
create mode 100644 arch/arm/boot/dts/rtd1195.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 08011dc8c7a6..4853a13c8cf2 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -865,6 +865,8 @@ dtb-$(CONFIG_ARCH_QCOM) += \
dtb-$(CONFIG_ARCH_RDA) += \
rda8810pl-orangepi-2g-iot.dtb \
rda8810pl-orangepi-i96.dtb
+dtb-$(CONFIG_ARCH_REALTEK) += \
+ rtd1195-mele-x1000.dtb
dtb-$(CONFIG_ARCH_REALVIEW) += \
arm-realview-pb1176.dtb \
arm-realview-pb11mp.dtb \
diff --git a/arch/arm/boot/dts/rtd1195-mele-x1000.dts b/arch/arm/boot/dts/rtd1195-mele-x1000.dts
new file mode 100644
index 000000000000..e2050cb64474
--- /dev/null
+++ b/arch/arm/boot/dts/rtd1195-mele-x1000.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2017-2019 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "rtd1195.dtsi"
+
+/ {
+ compatible = "mele,x1000", "realtek,rtd1195";
+ model = "MeLE X1000";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x18000000>, /* up to r-bus */
+ <0x18070000 0x00090000>, /* r-bus to NOR flash */
+ <0x19100000 0x26f00000>; /* NOR flash to 1 GiB */
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/rtd1195.dtsi b/arch/arm/boot/dts/rtd1195.dtsi
new file mode 100644
index 000000000000..c5713a5ef472
--- /dev/null
+++ b/arch/arm/boot/dts/rtd1195.dtsi
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2017-2019 Andreas Färber
+ */
+
+/memreserve/ 0x00000000 0x0000a800; /* boot code */
+/memreserve/ 0x0000a800 0x000f5800;
+/memreserve/ 0x17fff000 0x00001000;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "realtek,rtd1195";
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ clock-frequency = <1000000000>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x1>;
+ clock-frequency = <1000000000>;
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ rpc_comm: rpc@...0 {
+ reg = <0x0000b000 0x1000>;
+ };
+
+ audio@...0000 {
+ reg = <0x01b00000 0x400000>;
+ };
+
+ rpc_ringbuf: rpc@...e000 {
+ reg = <0x01ffe000 0x4000>;
+ };
+
+ secure@...00000 {
+ reg = <0x10000000 0x100000>;
+ no-map;
+ };
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <27000000>;
+ };
+
+ osc27M: osc {
+ compatible = "fixed-clock";
+ clock-frequency = <27000000>;
+ #clock-cells = <0>;
+ clock-output-names = "osc27M";
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x18000000 0x18000000 0x00070000>,
+ <0x18100000 0x18100000 0x01000000>,
+ <0x80000000 0x80000000 0x80000000>;
+
+ wdt: watchdog@...07680 {
+ compatible = "realtek,rtd1295-watchdog";
+ reg = <0x18007680 0x100>;
+ clocks = <&osc27M>;
+ };
+
+ uart0: serial@...07800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x18007800 0x400>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <27000000>;
+ status = "disabled";
+ };
+
+ uart1: serial@...1b200 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x1801b200 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <27000000>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@...11000 {
+ compatible = "arm,cortex-a7-gic";
+ reg = <0xff011000 0x1000>,
+ <0xff012000 0x2000>,
+ <0xff014000 0x2000>,
+ <0xff016000 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+ };
+};
--
2.16.4
Powered by blists - more mailing lists