| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20191125102659.22853-3-amelie.delaunay@st.com>
Date: Mon, 25 Nov 2019 11:26:59 +0100
From: Amelie Delaunay <amelie.delaunay@...com>
To: Minas Harutyunyan <hminas@...opsys.com>,
Felipe Balbi <balbi@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
CC: <linux-usb@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
Fabrice Gasnier <fabrice.gasnier@...com>,
Benjamin Gaignard <benjamin.gaignard@...com>,
Amelie Delaunay <amelie.delaunay@...com>
Subject: [PATCH 2/2] usb: dwc2: add support for STM32MP15 SoCs USB OTG HS and FS
This patch introduces a new parameter to activate external ID pin and valid
vbus level detection, required on STM32MP15 SoC to support dual role,
either in HS or FS.
The STM32MP15 SoC uses the GGPIO register to enable the level detection.
The level detector requires to be powered.
Also adds the params structures for STM32MP15 OTG HS and STM32MP1 OTG FS.
Signed-off-by: Amelie Delaunay <amelie.delaunay@...com>
---
drivers/usb/dwc2/core.h | 8 ++++
drivers/usb/dwc2/hw.h | 8 ++++
drivers/usb/dwc2/params.c | 33 +++++++++++++
drivers/usb/dwc2/platform.c | 94 ++++++++++++++++++++++++++++++++++++-
4 files changed, 141 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index d08d070a0fb6..687fefcd5706 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -411,6 +411,10 @@ enum dwc2_ep0_state {
* register.
* 0 - Deactivate the transceiver (default)
* 1 - Activate the transceiver
+ * @activate_stm_id_vb_detection: Activate external ID pin and Vbus level
+ * detection using GGPIO register.
+ * 0 - Deactivate the external level detection (default)
+ * 1 - Activate the external level detection
* @g_dma: Enables gadget dma usage (default: autodetect).
* @g_dma_desc: Enables gadget descriptor DMA (default: autodetect).
* @g_rx_fifo_size: The periodic rx fifo size for the device, in
@@ -481,6 +485,7 @@ struct dwc2_core_params {
bool service_interval;
u8 hird_threshold;
bool activate_stm_fs_transceiver;
+ bool activate_stm_id_vb_detection;
bool ipg_isoc_en;
u16 max_packet_count;
u32 max_transfer_size;
@@ -874,6 +879,8 @@ struct dwc2_hregs_backup {
* removed once all SoCs support usb transceiver.
* @supplies: Definition of USB power supplies
* @vbus_supply: Regulator supplying vbus.
+ * @usb33d: Optional 3.3v regulator used on some stm32 devices to
+ * supply ID and VBUS detection hardware.
* @lock: Spinlock that protects all the driver data structures
* @priv: Stores a pointer to the struct usb_hcd
* @queuing_high_bandwidth: True if multiple packets of a high-bandwidth
@@ -1061,6 +1068,7 @@ struct dwc2_hsotg {
struct dwc2_hsotg_plat *plat;
struct regulator_bulk_data supplies[DWC2_NUM_SUPPLIES];
struct regulator *vbus_supply;
+ struct regulator *usb33d;
spinlock_t lock;
void *priv;
diff --git a/drivers/usb/dwc2/hw.h b/drivers/usb/dwc2/hw.h
index 510e87ec0be8..c4027bbcedec 100644
--- a/drivers/usb/dwc2/hw.h
+++ b/drivers/usb/dwc2/hw.h
@@ -54,6 +54,12 @@
#define GOTGCTL_HSTSETHNPEN BIT(10)
#define GOTGCTL_HNPREQ BIT(9)
#define GOTGCTL_HSTNEGSCS BIT(8)
+#define GOTGCTL_BVALOVAL BIT(7)
+#define GOTGCTL_BVALOEN BIT(6)
+#define GOTGCTL_AVALOVAL BIT(5)
+#define GOTGCTL_AVALOEN BIT(4)
+#define GOTGCTL_VBVALOVAL BIT(3)
+#define GOTGCTL_VBVALOEN BIT(2)
#define GOTGCTL_SESREQ BIT(1)
#define GOTGCTL_SESREQSCS BIT(0)
@@ -227,6 +233,8 @@
#define GPVNDCTL HSOTG_REG(0x0034)
#define GGPIO HSOTG_REG(0x0038)
#define GGPIO_STM32_OTG_GCCFG_PWRDWN BIT(16)
+#define GGPIO_STM32_OTG_GCCFG_VBDEN BIT(21)
+#define GGPIO_STM32_OTG_GCCFG_IDEN BIT(22)
#define GUID HSOTG_REG(0x003c)
#define GSNPSID HSOTG_REG(0x0040)
diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
index 31e090ac9f1e..8ccc83f7eb3f 100644
--- a/drivers/usb/dwc2/params.c
+++ b/drivers/usb/dwc2/params.c
@@ -163,6 +163,35 @@ static void dwc2_set_stm32f7_hsotg_params(struct dwc2_hsotg *hsotg)
p->host_perio_tx_fifo_size = 256;
}
+static void dwc2_set_stm32mp15_fsotg_params(struct dwc2_hsotg *hsotg)
+{
+ struct dwc2_core_params *p = &hsotg->params;
+
+ p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
+ p->speed = DWC2_SPEED_PARAM_FULL;
+ p->host_rx_fifo_size = 128;
+ p->host_nperio_tx_fifo_size = 96;
+ p->host_perio_tx_fifo_size = 96;
+ p->max_packet_count = 256;
+ p->phy_type = DWC2_PHY_TYPE_PARAM_FS;
+ p->i2c_enable = false;
+ p->activate_stm_fs_transceiver = true;
+ p->activate_stm_id_vb_detection = true;
+ p->power_down = DWC2_POWER_DOWN_PARAM_NONE;
+}
+
+static void dwc2_set_stm32mp15_hsotg_params(struct dwc2_hsotg *hsotg)
+{
+ struct dwc2_core_params *p = &hsotg->params;
+
+ p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
+ p->activate_stm_id_vb_detection = true;
+ p->host_rx_fifo_size = 440;
+ p->host_nperio_tx_fifo_size = 256;
+ p->host_perio_tx_fifo_size = 256;
+ p->power_down = DWC2_POWER_DOWN_PARAM_NONE;
+}
+
const struct of_device_id dwc2_of_match_table[] = {
{ .compatible = "brcm,bcm2835-usb", .data = dwc2_set_bcm_params },
{ .compatible = "hisilicon,hi6220-usb", .data = dwc2_set_his_params },
@@ -186,6 +215,10 @@ const struct of_device_id dwc2_of_match_table[] = {
{ .compatible = "st,stm32f4x9-hsotg" },
{ .compatible = "st,stm32f7-hsotg",
.data = dwc2_set_stm32f7_hsotg_params },
+ { .compatible = "st,stm32mp15-fsotg",
+ .data = dwc2_set_stm32mp15_fsotg_params },
+ { .compatible = "st,stm32mp15-hsotg",
+ .data = dwc2_set_stm32mp15_hsotg_params },
{},
};
MODULE_DEVICE_TABLE(of, dwc2_of_match_table);
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index 3c6ce09a6db5..8368d6d66d64 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -312,6 +312,9 @@ static int dwc2_driver_remove(struct platform_device *dev)
if (hsotg->gadget_enabled)
dwc2_hsotg_remove(hsotg);
+ if (hsotg->params.activate_stm_id_vb_detection)
+ regulator_disable(hsotg->usb33d);
+
if (hsotg->ll_hw_enabled)
dwc2_lowlevel_hw_disable(hsotg);
@@ -464,10 +467,35 @@ static int dwc2_driver_probe(struct platform_device *dev)
if (retval)
goto error;
+ if (hsotg->params.activate_stm_id_vb_detection) {
+ u32 ggpio;
+
+ hsotg->usb33d = devm_regulator_get(hsotg->dev, "usb33d");
+ if (IS_ERR(hsotg->usb33d)) {
+ retval = PTR_ERR(hsotg->usb33d);
+ if (retval != -EPROBE_DEFER)
+ dev_err(hsotg->dev,
+ "failed to request usb33d supply: %d\n",
+ retval);
+ goto error;
+ }
+ retval = regulator_enable(hsotg->usb33d);
+ if (retval) {
+ dev_err(hsotg->dev,
+ "failed to enable usb33d supply: %d\n", retval);
+ goto error;
+ }
+
+ ggpio = dwc2_readl(hsotg, GGPIO);
+ ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN;
+ ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN;
+ dwc2_writel(hsotg, ggpio, GGPIO);
+ }
+
if (hsotg->dr_mode != USB_DR_MODE_HOST) {
retval = dwc2_gadget_init(hsotg);
if (retval)
- goto error;
+ goto error_init;
hsotg->gadget_enabled = 1;
}
@@ -493,7 +521,7 @@ static int dwc2_driver_probe(struct platform_device *dev)
if (retval) {
if (hsotg->gadget_enabled)
dwc2_hsotg_remove(hsotg);
- goto error;
+ goto error_init;
}
hsotg->hcd_enabled = 1;
}
@@ -509,6 +537,9 @@ static int dwc2_driver_probe(struct platform_device *dev)
return 0;
+error_init:
+ if (hsotg->params.activate_stm_id_vb_detection)
+ regulator_disable(hsotg->usb33d);
error:
dwc2_lowlevel_hw_disable(hsotg);
return retval;
@@ -523,6 +554,37 @@ static int __maybe_unused dwc2_suspend(struct device *dev)
if (is_device_mode)
dwc2_hsotg_suspend(dwc2);
+ if (dwc2->params.activate_stm_id_vb_detection) {
+ unsigned long flags;
+ u32 ggpio, gotgctl;
+
+ /*
+ * Need to force the mode to the current mode to avoid Mode
+ * Mismatch Interrupt when ID detection will be disabled.
+ */
+ dwc2_force_mode(dwc2, !is_device_mode);
+
+ spin_lock_irqsave(&dwc2->lock, flags);
+ gotgctl = dwc2_readl(dwc2, GOTGCTL);
+ /* bypass debounce filter, enable overrides */
+ gotgctl |= GOTGCTL_DBNCE_FLTR_BYPASS;
+ gotgctl |= GOTGCTL_BVALOEN | GOTGCTL_AVALOEN;
+ /* Force A / B session if needed */
+ if (gotgctl & GOTGCTL_ASESVLD)
+ gotgctl |= GOTGCTL_AVALOVAL;
+ if (gotgctl & GOTGCTL_BSESVLD)
+ gotgctl |= GOTGCTL_BVALOVAL;
+ dwc2_writel(dwc2, gotgctl, GOTGCTL);
+ spin_unlock_irqrestore(&dwc2->lock, flags);
+
+ ggpio = dwc2_readl(dwc2, GGPIO);
+ ggpio &= ~GGPIO_STM32_OTG_GCCFG_IDEN;
+ ggpio &= ~GGPIO_STM32_OTG_GCCFG_VBDEN;
+ dwc2_writel(dwc2, ggpio, GGPIO);
+
+ regulator_disable(dwc2->usb33d);
+ }
+
if (dwc2->ll_hw_enabled &&
(is_device_mode || dwc2_host_can_poweroff_phy(dwc2))) {
ret = __dwc2_lowlevel_hw_disable(dwc2);
@@ -544,6 +606,34 @@ static int __maybe_unused dwc2_resume(struct device *dev)
}
dwc2->phy_off_for_suspend = false;
+ if (dwc2->params.activate_stm_id_vb_detection) {
+ unsigned long flags;
+ u32 ggpio, gotgctl;
+
+ ret = regulator_enable(dwc2->usb33d);
+ if (ret)
+ return ret;
+
+ ggpio = dwc2_readl(dwc2, GGPIO);
+ ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN;
+ ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN;
+ dwc2_writel(dwc2, ggpio, GGPIO);
+
+ /* ID/VBUS detection startup time */
+ usleep_range(5000, 7000);
+
+ spin_lock_irqsave(&dwc2->lock, flags);
+ gotgctl = dwc2_readl(dwc2, GOTGCTL);
+ gotgctl &= ~GOTGCTL_DBNCE_FLTR_BYPASS;
+ gotgctl &= ~(GOTGCTL_BVALOEN | GOTGCTL_AVALOEN |
+ GOTGCTL_BVALOVAL | GOTGCTL_AVALOVAL);
+ dwc2_writel(dwc2, gotgctl, GOTGCTL);
+ spin_unlock_irqrestore(&dwc2->lock, flags);
+ }
+
+ /* Need to restore FORCEDEVMODE/FORCEHOSTMODE */
+ dwc2_force_dr_mode(dwc2);
+
if (dwc2_is_device_mode(dwc2))
ret = dwc2_hsotg_resume(dwc2);
--
2.17.1
Powered by blists - more mailing lists