linux-kernel - [PATCH 0/4] Add support for SC7180 display

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1574683169-19342-1-git-send-email-kalyan_t@codeaurora.org>
Date:   Mon, 25 Nov 2019 17:29:25 +0530
From:   Kalyan Thota <kalyan_t@...eaurora.org>
To:     dri-devel@...ts.freedesktop.org, linux-arm-msm@...r.kernel.org,
        freedreno@...ts.freedesktop.org, devicetree@...r.kernel.org
Cc:     Kalyan Thota <kalyan_t@...eaurora.org>,
        linux-kernel@...r.kernel.org, robdclark@...il.com,
        seanpaul@...omium.org, hoegsberg@...omium.org, dhar@...eaurora.org,
        jsanka@...eaurora.org, chandanu@...eaurora.org,
        travitej@...eaurora.org, nganji@...eaurora.org
Subject: [PATCH 0/4] Add support for SC7180 display 

SC7180 follows a newer architecture where in some flush controls have been re-organized to simplify programming and provide for future expandability.
Specifically:
1) The TIMING_<j> bits that control flush of INTF_<j> have been replaced with a common INTF flush bit which flushes the programming in the MDP_CTL_<id>_INTF_ACTIVE register
2) Individual flush bits for MERGE_3D, DSC and CDWN have been added which flush the programming in the MDP_CTL_<id>_MERGE_3D_ACTIVE, ... etc respectively
3) PERIPH flush bit has been added to flush DSP packets for DisplayPort

The complete datapath is described using the MDP_CTL_<id>_TOP and newly added ACTIVE registers to handle other sub blocks
such as interface (INTF) resources, PingPong buffer / Layer Mixer, Display Stream Compression (DSC) resources, writeback (WB) and 3D Merge
selections that are part of the datapath.

Kalyan Thota (4):
  dt-bindings: msm:disp: add sc7180 DPU variant
  msm:disp:dpu1: add support for display for SC7180 target
  msm:disp:dpu1: setup display datapath for SC7180 target
  msm:disp:dpu1: add mixer selection for display topology

 .../devicetree/bindings/display/msm/dpu.txt        |   4 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c        |  21 ++-
 .../gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c   |  21 ++-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c     | 191 +++++++++++++++++++--
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h     |   6 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c         |  84 ++++++++-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h         |  24 +++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c        |  28 +++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h        |   6 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c          |   3 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c            |   1 +
 drivers/gpu/drm/msm/msm_drv.c                      |   4 +-
 12 files changed, 370 insertions(+), 23 deletions(-)

-- 
1.9.1