| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 25 Nov 2019 13:22:52 +0100
From: Stephan Gerhold <stephan@...hold.net>
To: Linus Walleij <linus.walleij@...aro.org>
Cc: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Stephan Gerhold <stephan@...hold.net>
Subject: [PATCH 1/5] ARM: dts: ux500: Move generic pin configs out of ste-href-family-pinctrl.dtsi
All existing Ux500 boards make use of ste-href-family-pinctrl.dtsi,
which contains shared pin configurations for UART, I2C and SDI.
Most of these can be also used for devices not based on HREF.
Move the generic pin configs into a new device tree include
"ste-dbx5x0-pinctrl.dtsi". There is no functional change (yet),
as a next step we will rename the pin configs to use more generic
names.
Signed-off-by: Stephan Gerhold <stephan@...hold.net>
---
arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi | 529 +++++++++++++++++
.../arm/boot/dts/ste-href-family-pinctrl.dtsi | 532 +-----------------
2 files changed, 530 insertions(+), 531 deletions(-)
create mode 100644 arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi
diff --git a/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi b/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi
new file mode 100644
index 000000000000..fbc41cacf690
--- /dev/null
+++ b/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi
@@ -0,0 +1,529 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Linaro Ltd.
+ */
+
+#include "ste-nomadik-pinctrl.dtsi"
+
+&pinctrl {
+ /* Settings for all UART default and sleep states */
+ uart0 {
+ uart0_default_mode: uart0_default {
+ default_mux {
+ function = "u0";
+ groups = "u0_a_1";
+ };
+ default_cfg1 {
+ pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
+ ste,config = <&in_pu>;
+ };
+ default_cfg2 {
+ pins = "GPIO1_AJ3", "GPIO3_AH3"; /* RTS+TXD */
+ ste,config = <&out_hi>;
+ };
+ };
+
+ uart0_sleep_mode: uart0_sleep {
+ sleep_cfg1 {
+ pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ sleep_cfg2 {
+ pins = "GPIO1_AJ3"; /* RTS */
+ ste,config = <&slpm_out_hi_wkup_pdis>;
+ };
+ sleep_cfg3 {
+ pins = "GPIO3_AH3"; /* TXD */
+ ste,config = <&slpm_out_wkup_pdis>;
+ };
+ };
+ };
+
+ uart1 {
+ uart1_default_mode: uart1_default {
+ default_mux {
+ function = "u1";
+ groups = "u1rxtx_a_1";
+ };
+ default_cfg1 {
+ pins = "GPIO4_AH6"; /* RXD */
+ ste,config = <&in_pu>;
+ };
+ default_cfg2 {
+ pins = "GPIO5_AG6"; /* TXD */
+ ste,config = <&out_hi>;
+ };
+ };
+
+ uart1_sleep_mode: uart1_sleep {
+ sleep_cfg1 {
+ pins = "GPIO4_AH6"; /* RXD */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ sleep_cfg2 {
+ pins = "GPIO5_AG6"; /* TXD */
+ ste,config = <&slpm_out_wkup_pdis>;
+ };
+ };
+ };
+
+ uart2 {
+ uart2_default_mode: uart2_default {
+ default_mux {
+ function = "u2";
+ groups = "u2rxtx_c_1";
+ };
+ default_cfg1 {
+ pins = "GPIO29_W2"; /* RXD */
+ ste,config = <&in_pu>;
+ };
+ default_cfg2 {
+ pins = "GPIO30_W3"; /* TXD */
+ ste,config = <&out_hi>;
+ };
+ };
+
+ uart2_sleep_mode: uart2_sleep {
+ sleep_cfg1 {
+ pins = "GPIO29_W2"; /* RXD */
+ ste,config = <&in_wkup_pdis>;
+ };
+ sleep_cfg2 {
+ pins = "GPIO30_W3"; /* TXD */
+ ste,config = <&out_wkup_pdis>;
+ };
+ };
+ };
+
+ /* Settings for all I2C default and sleep states */
+ i2c0 {
+ i2c0_default_mode: i2c_default {
+ default_mux {
+ function = "i2c0";
+ groups = "i2c0_a_1";
+ };
+ default_cfg1 {
+ pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
+ ste,config = <&in_pu>;
+ };
+ };
+
+ i2c0_sleep_mode: i2c_sleep {
+ sleep_cfg1 {
+ pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ };
+ };
+
+ i2c1 {
+ i2c1_default_mode: i2c_default {
+ default_mux {
+ function = "i2c1";
+ groups = "i2c1_b_2";
+ };
+ default_cfg1 {
+ pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
+ ste,config = <&in_pu>;
+ };
+ };
+
+ i2c1_sleep_mode: i2c_sleep {
+ sleep_cfg1 {
+ pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ };
+ };
+
+ i2c2 {
+ i2c2_default_mode: i2c_default {
+ default_mux {
+ function = "i2c2";
+ groups = "i2c2_b_2";
+ };
+ default_cfg1 {
+ pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
+ ste,config = <&in_pu>;
+ };
+ };
+
+ i2c2_sleep_mode: i2c_sleep {
+ sleep_cfg1 {
+ pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ };
+ };
+
+ i2c3 {
+ i2c3_default_mode: i2c_default {
+ default_mux {
+ function = "i2c3";
+ groups = "i2c3_c_2";
+ };
+ default_cfg1 {
+ pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
+ ste,config = <&in_pu>;
+ };
+ };
+
+ i2c3_sleep_mode: i2c_sleep {
+ sleep_cfg1 {
+ pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ };
+ };
+
+ /*
+ * Activating I2C4 will conflict with UART1 about the same pins so do not
+ * enable I2C4 and UART1 at the same time.
+ */
+ i2c4 {
+ i2c4_default_mode: i2c_default {
+ default_mux {
+ function = "i2c4";
+ groups = "i2c4_b_1";
+ };
+ default_cfg1 {
+ pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
+ ste,config = <&in_pu>;
+ };
+ };
+
+ i2c4_sleep_mode: i2c_sleep {
+ sleep_cfg1 {
+ pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ };
+ };
+
+ /* Settings for all MMC/SD/SDIO default and sleep states */
+ sdi0 {
+ /* This is the external SD card slot, 4 bits wide */
+ sdi0_default_mode: sdi0_default {
+ default_mux {
+ function = "mc0";
+ groups = "mc0_a_1";
+ };
+ default_cfg1 {
+ pins =
+ "GPIO18_AC2", /* CMDDIR */
+ "GPIO19_AC1", /* DAT0DIR */
+ "GPIO20_AB4"; /* DAT2DIR */
+ ste,config = <&out_hi>;
+ };
+ default_cfg2 {
+ pins = "GPIO22_AA3"; /* FBCLK */
+ ste,config = <&in_nopull>;
+ };
+ default_cfg3 {
+ pins = "GPIO23_AA4"; /* CLK */
+ ste,config = <&out_lo>;
+ };
+ default_cfg4 {
+ pins =
+ "GPIO24_AB2", /* CMD */
+ "GPIO25_Y4", /* DAT0 */
+ "GPIO26_Y2", /* DAT1 */
+ "GPIO27_AA2", /* DAT2 */
+ "GPIO28_AA1"; /* DAT3 */
+ ste,config = <&in_pu>;
+ };
+ };
+
+ sdi0_sleep_mode: sdi0_sleep {
+ sleep_cfg1 {
+ pins =
+ "GPIO18_AC2", /* CMDDIR */
+ "GPIO19_AC1", /* DAT0DIR */
+ "GPIO20_AB4"; /* DAT2DIR */
+ ste,config = <&slpm_out_hi_wkup_pdis>;
+ };
+ sleep_cfg2 {
+ pins =
+ "GPIO22_AA3", /* FBCLK */
+ "GPIO24_AB2", /* CMD */
+ "GPIO25_Y4", /* DAT0 */
+ "GPIO26_Y2", /* DAT1 */
+ "GPIO27_AA2", /* DAT2 */
+ "GPIO28_AA1"; /* DAT3 */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ sleep_cfg3 {
+ pins = "GPIO23_AA4"; /* CLK */
+ ste,config = <&slpm_out_lo_wkup_pdis>;
+ };
+ };
+ };
+
+ sdi1 {
+ /* This is the WLAN SDIO 4 bits wide */
+ sdi1_default_mode: sdi1_default {
+ default_mux {
+ function = "mc1";
+ groups = "mc1_a_1";
+ };
+ default_cfg1 {
+ pins = "GPIO208_AH16"; /* CLK */
+ ste,config = <&out_lo>;
+ };
+ default_cfg2 {
+ pins = "GPIO209_AG15"; /* FBCLK */
+ ste,config = <&in_nopull>;
+ };
+ default_cfg3 {
+ pins =
+ "GPIO210_AJ15", /* CMD */
+ "GPIO211_AG14", /* DAT0 */
+ "GPIO212_AF13", /* DAT1 */
+ "GPIO213_AG13", /* DAT2 */
+ "GPIO214_AH15"; /* DAT3 */
+ ste,config = <&in_pu>;
+ };
+ };
+
+ sdi1_sleep_mode: sdi1_sleep {
+ sleep_cfg1 {
+ pins = "GPIO208_AH16"; /* CLK */
+ ste,config = <&slpm_out_lo_wkup_pdis>;
+ };
+ sleep_cfg2 {
+ pins =
+ "GPIO209_AG15", /* FBCLK */
+ "GPIO210_AJ15", /* CMD */
+ "GPIO211_AG14", /* DAT0 */
+ "GPIO212_AF13", /* DAT1 */
+ "GPIO213_AG13", /* DAT2 */
+ "GPIO214_AH15"; /* DAT3 */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ };
+ };
+
+ sdi2 {
+ /* This is the eMMC 8 bits wide, usually PoP eMMC */
+ sdi2_default_mode: sdi2_default {
+ default_mux {
+ function = "mc2";
+ groups = "mc2_a_1";
+ };
+ default_cfg1 {
+ pins = "GPIO128_A5"; /* CLK */
+ ste,config = <&out_lo>;
+ };
+ default_cfg2 {
+ pins = "GPIO130_C8"; /* FBCLK */
+ ste,config = <&in_nopull>;
+ };
+ default_cfg3 {
+ pins =
+ "GPIO129_B4", /* CMD */
+ "GPIO131_A12", /* DAT0 */
+ "GPIO132_C10", /* DAT1 */
+ "GPIO133_B10", /* DAT2 */
+ "GPIO134_B9", /* DAT3 */
+ "GPIO135_A9", /* DAT4 */
+ "GPIO136_C7", /* DAT5 */
+ "GPIO137_A7", /* DAT6 */
+ "GPIO138_C5"; /* DAT7 */
+ ste,config = <&in_pu>;
+ };
+ };
+
+ sdi2_sleep_mode: sdi2_sleep {
+ sleep_cfg1 {
+ pins = "GPIO128_A5"; /* CLK */
+ ste,config = <&out_lo_wkup_pdis>;
+ };
+ sleep_cfg2 {
+ pins =
+ "GPIO130_C8", /* FBCLK */
+ "GPIO129_B4"; /* CMD */
+ ste,config = <&in_wkup_pdis_en>;
+ };
+ sleep_cfg3 {
+ pins =
+ "GPIO131_A12", /* DAT0 */
+ "GPIO132_C10", /* DAT1 */
+ "GPIO133_B10", /* DAT2 */
+ "GPIO134_B9", /* DAT3 */
+ "GPIO135_A9", /* DAT4 */
+ "GPIO136_C7", /* DAT5 */
+ "GPIO137_A7", /* DAT6 */
+ "GPIO138_C5"; /* DAT7 */
+ ste,config = <&in_wkup_pdis>;
+ };
+ };
+ };
+
+ sdi4 {
+ /* This is the eMMC 8 bits wide, usually PCB-mounted eMMC */
+ sdi4_default_mode: sdi4_default {
+ default_mux {
+ function = "mc4";
+ groups = "mc4_a_1";
+ };
+ default_cfg1 {
+ pins = "GPIO203_AE23"; /* CLK */
+ ste,config = <&out_lo>;
+ };
+ default_cfg2 {
+ pins = "GPIO202_AF25"; /* FBCLK */
+ ste,config = <&in_nopull>;
+ };
+ default_cfg3 {
+ pins =
+ "GPIO201_AF24", /* CMD */
+ "GPIO200_AH26", /* DAT0 */
+ "GPIO199_AH23", /* DAT1 */
+ "GPIO198_AG25", /* DAT2 */
+ "GPIO197_AH24", /* DAT3 */
+ "GPIO207_AJ23", /* DAT4 */
+ "GPIO206_AG24", /* DAT5 */
+ "GPIO205_AG23", /* DAT6 */
+ "GPIO204_AF23"; /* DAT7 */
+ ste,config = <&in_pu>;
+ };
+ };
+
+ sdi4_sleep_mode: sdi4_sleep {
+ sleep_cfg1 {
+ pins = "GPIO203_AE23"; /* CLK */
+ ste,config = <&out_lo_wkup_pdis>;
+ };
+ sleep_cfg2 {
+ pins =
+ "GPIO202_AF25", /* FBCLK */
+ "GPIO201_AF24", /* CMD */
+ "GPIO200_AH26", /* DAT0 */
+ "GPIO199_AH23", /* DAT1 */
+ "GPIO198_AG25", /* DAT2 */
+ "GPIO197_AH24", /* DAT3 */
+ "GPIO207_AJ23", /* DAT4 */
+ "GPIO206_AG24", /* DAT5 */
+ "GPIO205_AG23", /* DAT6 */
+ "GPIO204_AF23"; /* DAT7 */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ };
+ };
+
+ /*
+ * Multi-rate serial ports (MSPs) - MSP3 output is internal and
+ * cannot be muxed onto any pins.
+ */
+ msp0 {
+ msp0_default_mode: msp0_default {
+ default_msp0_mux {
+ function = "msp0";
+ groups = "msp0txrx_a_1", "msp0tfstck_a_1";
+ };
+ default_msp0_cfg {
+ pins =
+ "GPIO12_AC4", /* TXD */
+ "GPIO15_AC3", /* RXD */
+ "GPIO13_AF3", /* TFS */
+ "GPIO14_AE3"; /* TCK */
+ ste,config = <&in_nopull>;
+ };
+ };
+ };
+
+ msp1 {
+ msp1_default_mode: msp1_default {
+ default_mux {
+ function = "msp1";
+ groups = "msp1txrx_a_1", "msp1_a_1";
+ };
+ default_cfg1 {
+ pins = "GPIO33_AF2";
+ ste,config = <&out_lo>;
+ };
+ default_cfg2 {
+ pins =
+ "GPIO34_AE1",
+ "GPIO35_AE2",
+ "GPIO36_AG2";
+ ste,config = <&in_nopull>;
+ };
+ };
+ };
+
+ msp2 {
+ msp2_default_mode: msp2_default {
+ /* MSP2 usually used for HDMI audio */
+ default_mux {
+ function = "msp2";
+ groups = "msp2_a_1";
+ };
+ default_cfg1 {
+ pins =
+ "GPIO193_AH27", /* TXD */
+ "GPIO194_AF27", /* TCK */
+ "GPIO195_AG28"; /* TFS */
+ ste,config = <&in_pd>;
+ };
+ default_cfg2 {
+ pins = "GPIO196_AG26"; /* RXD */
+ ste,config = <&out_lo>;
+ };
+ };
+ };
+
+ musb {
+ musb_default_mode: musb_default {
+ default_mux {
+ function = "usb";
+ groups = "usb_a_1";
+ };
+ default_cfg1 {
+ pins =
+ "GPIO256_AF28", /* NXT */
+ "GPIO258_AD29", /* XCLK */
+ "GPIO259_AC29", /* DIR */
+ "GPIO260_AD28", /* DAT7 */
+ "GPIO261_AD26", /* DAT6 */
+ "GPIO262_AE26", /* DAT5 */
+ "GPIO263_AG29", /* DAT4 */
+ "GPIO264_AE27", /* DAT3 */
+ "GPIO265_AD27", /* DAT2 */
+ "GPIO266_AC28", /* DAT1 */
+ "GPIO267_AC27"; /* DAT0 */
+ ste,config = <&in_nopull>;
+ };
+ default_cfg2 {
+ pins = "GPIO257_AE29"; /* STP */
+ ste,config = <&out_hi>;
+ };
+ };
+
+ musb_sleep_mode: musb_sleep {
+ sleep_cfg1 {
+ pins =
+ "GPIO256_AF28", /* NXT */
+ "GPIO258_AD29", /* XCLK */
+ "GPIO259_AC29"; /* DIR */
+ ste,config = <&slpm_wkup_pdis_en>;
+ };
+ sleep_cfg2 {
+ pins = "GPIO257_AE29"; /* STP */
+ ste,config = <&slpm_out_hi_wkup_pdis>;
+ };
+ sleep_cfg3 {
+ pins =
+ "GPIO260_AD28", /* DAT7 */
+ "GPIO261_AD26", /* DAT6 */
+ "GPIO262_AE26", /* DAT5 */
+ "GPIO263_AG29", /* DAT4 */
+ "GPIO264_AE27", /* DAT3 */
+ "GPIO265_AD27", /* DAT2 */
+ "GPIO266_AC28", /* DAT1 */
+ "GPIO267_AC27"; /* DAT0 */
+ ste,config = <&slpm_in_wkup_pdis_en>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
index 2c382d274ff6..434fa6baf71f 100644
--- a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
+++ b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
@@ -3,212 +3,11 @@
* Copyright 2013 Linaro Ltd.
*/
-#include "ste-nomadik-pinctrl.dtsi"
+#include "ste-dbx5x0-pinctrl.dtsi"
/ {
soc {
pinctrl {
- /* Settings for all UART default and sleep states */
- uart0 {
- uart0_default_mode: uart0_default {
- default_mux {
- function = "u0";
- groups = "u0_a_1";
- };
- default_cfg1 {
- pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
- ste,config = <&in_pu>;
- };
-
- default_cfg2 {
- pins = "GPIO1_AJ3", "GPIO3_AH3"; /* RTS+TXD */
- ste,config = <&out_hi>;
- };
- };
-
- uart0_sleep_mode: uart0_sleep {
- sleep_cfg1 {
- pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
- ste,config = <&slpm_in_wkup_pdis>;
- };
-
- sleep_cfg2 {
- pins = "GPIO1_AJ3"; /* RTS */
- ste,config = <&slpm_out_hi_wkup_pdis>;
- };
-
- sleep_cfg3 {
- pins = "GPIO3_AH3"; /* TXD */
- ste,config = <&slpm_out_wkup_pdis>;
- };
- };
- };
-
- uart1 {
- uart1_default_mode: uart1_default {
- default_mux {
- function = "u1";
- groups = "u1rxtx_a_1";
- };
- default_cfg1 {
- pins = "GPIO4_AH6"; /* RXD */
- ste,config = <&in_pu>;
- };
-
- default_cfg2 {
- pins = "GPIO5_AG6"; /* TXD */
- ste,config = <&out_hi>;
- };
- };
-
- uart1_sleep_mode: uart1_sleep {
- sleep_cfg1 {
- pins = "GPIO4_AH6"; /* RXD */
- ste,config = <&slpm_in_wkup_pdis>;
- };
-
- sleep_cfg2 {
- pins = "GPIO5_AG6"; /* TXD */
- ste,config = <&slpm_out_wkup_pdis>;
- };
- };
- };
-
- uart2 {
- uart2_default_mode: uart2_default {
- default_mux {
- function = "u2";
- groups = "u2rxtx_c_1";
- };
- default_cfg1 {
- pins = "GPIO29_W2"; /* RXD */
- ste,config = <&in_pu>;
- };
-
- default_cfg2 {
- pins = "GPIO30_W3"; /* TXD */
- ste,config = <&out_hi>;
- };
- };
-
- uart2_sleep_mode: uart2_sleep {
- sleep_cfg1 {
- pins = "GPIO29_W2"; /* RXD */
- ste,config = <&in_wkup_pdis>;
- };
-
- sleep_cfg2 {
- pins = "GPIO30_W3"; /* TXD */
- ste,config = <&out_wkup_pdis>;
- };
- };
- };
-
- /* Settings for all I2C default and sleep states */
- i2c0 {
- i2c0_default_mode: i2c_default {
- default_mux {
- function = "i2c0";
- groups = "i2c0_a_1";
- };
- default_cfg1 {
- pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
- ste,config = <&in_pu>;
- };
- };
-
- i2c0_sleep_mode: i2c_sleep {
- sleep_cfg1 {
- pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
- ste,config = <&slpm_in_wkup_pdis>;
- };
- };
- };
-
- i2c1 {
- i2c1_default_mode: i2c_default {
- default_mux {
- function = "i2c1";
- groups = "i2c1_b_2";
- };
- default_cfg1 {
- pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
- ste,config = <&in_pu>;
- };
- };
-
- i2c1_sleep_mode: i2c_sleep {
- sleep_cfg1 {
- pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
- ste,config = <&slpm_in_wkup_pdis>;
- };
- };
- };
-
- i2c2 {
- i2c2_default_mode: i2c_default {
- default_mux {
- function = "i2c2";
- groups = "i2c2_b_2";
- };
- default_cfg1 {
- pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
- ste,config = <&in_pu>;
- };
- };
-
- i2c2_sleep_mode: i2c_sleep {
- sleep_cfg1 {
- pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
- ste,config = <&slpm_in_wkup_pdis>;
- };
- };
- };
-
- i2c3 {
- i2c3_default_mode: i2c_default {
- default_mux {
- function = "i2c3";
- groups = "i2c3_c_2";
- };
- default_cfg1 {
- pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
- ste,config = <&in_pu>;
- };
- };
-
- i2c3_sleep_mode: i2c_sleep {
- sleep_cfg1 {
- pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
- ste,config = <&slpm_in_wkup_pdis>;
- };
- };
- };
-
- /*
- * Activating I2C4 will conflict with UART1 about the same pins so do not
- * enable I2C4 and UART1 at the same time.
- */
- i2c4 {
- i2c4_default_mode: i2c_default {
- default_mux {
- function = "i2c4";
- groups = "i2c4_b_1";
- };
- default_cfg1 {
- pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
- ste,config = <&in_pu>;
- };
- };
-
- i2c4_sleep_mode: i2c_sleep {
- sleep_cfg1 {
- pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
- ste,config = <&slpm_in_wkup_pdis>;
- };
- };
- };
-
/* Settings for all SPI default and sleep states */
spi2 {
spi2_default_mode: spi_default {
@@ -270,335 +69,6 @@
};
};
- /* Settings for all MMC/SD/SDIO default and sleep states */
- sdi0 {
- /* This is the external SD card slot, 4 bits wide */
- sdi0_default_mode: sdi0_default {
- default_mux {
- function = "mc0";
- groups = "mc0_a_1";
- };
- default_cfg1 {
- pins =
- "GPIO18_AC2", /* CMDDIR */
- "GPIO19_AC1", /* DAT0DIR */
- "GPIO20_AB4"; /* DAT2DIR */
- ste,config = <&out_hi>;
- };
- default_cfg2 {
- pins = "GPIO22_AA3"; /* FBCLK */
- ste,config = <&in_nopull>;
- };
- default_cfg3 {
- pins = "GPIO23_AA4"; /* CLK */
- ste,config = <&out_lo>;
- };
- default_cfg4 {
- pins =
- "GPIO24_AB2", /* CMD */
- "GPIO25_Y4", /* DAT0 */
- "GPIO26_Y2", /* DAT1 */
- "GPIO27_AA2", /* DAT2 */
- "GPIO28_AA1"; /* DAT3 */
- ste,config = <&in_pu>;
- };
- };
-
- sdi0_sleep_mode: sdi0_sleep {
- sleep_cfg1 {
- pins =
- "GPIO18_AC2", /* CMDDIR */
- "GPIO19_AC1", /* DAT0DIR */
- "GPIO20_AB4"; /* DAT2DIR */
- ste,config = <&slpm_out_hi_wkup_pdis>;
- };
- sleep_cfg2 {
- pins =
- "GPIO22_AA3", /* FBCLK */
- "GPIO24_AB2", /* CMD */
- "GPIO25_Y4", /* DAT0 */
- "GPIO26_Y2", /* DAT1 */
- "GPIO27_AA2", /* DAT2 */
- "GPIO28_AA1"; /* DAT3 */
- ste,config = <&slpm_in_wkup_pdis>;
- };
- sleep_cfg3 {
- pins = "GPIO23_AA4"; /* CLK */
- ste,config = <&slpm_out_lo_wkup_pdis>;
- };
- };
- };
-
- sdi1 {
- /* This is the WLAN SDIO 4 bits wide */
- sdi1_default_mode: sdi1_default {
- default_mux {
- function = "mc1";
- groups = "mc1_a_1";
- };
- default_cfg1 {
- pins = "GPIO208_AH16"; /* CLK */
- ste,config = <&out_lo>;
- };
- default_cfg2 {
- pins = "GPIO209_AG15"; /* FBCLK */
- ste,config = <&in_nopull>;
- };
- default_cfg3 {
- pins =
- "GPIO210_AJ15", /* CMD */
- "GPIO211_AG14", /* DAT0 */
- "GPIO212_AF13", /* DAT1 */
- "GPIO213_AG13", /* DAT2 */
- "GPIO214_AH15"; /* DAT3 */
- ste,config = <&in_pu>;
- };
- };
-
- sdi1_sleep_mode: sdi1_sleep {
- sleep_cfg1 {
- pins = "GPIO208_AH16"; /* CLK */
- ste,config = <&slpm_out_lo_wkup_pdis>;
- };
- sleep_cfg2 {
- pins =
- "GPIO209_AG15", /* FBCLK */
- "GPIO210_AJ15", /* CMD */
- "GPIO211_AG14", /* DAT0 */
- "GPIO212_AF13", /* DAT1 */
- "GPIO213_AG13", /* DAT2 */
- "GPIO214_AH15"; /* DAT3 */
- ste,config = <&slpm_in_wkup_pdis>;
- };
- };
- };
-
- sdi2 {
- /* This is the eMMC 8 bits wide, usually PoP eMMC */
- sdi2_default_mode: sdi2_default {
- default_mux {
- function = "mc2";
- groups = "mc2_a_1";
- };
- default_cfg1 {
- pins = "GPIO128_A5"; /* CLK */
- ste,config = <&out_lo>;
- };
- default_cfg2 {
- pins = "GPIO130_C8"; /* FBCLK */
- ste,config = <&in_nopull>;
- };
- default_cfg3 {
- pins =
- "GPIO129_B4", /* CMD */
- "GPIO131_A12", /* DAT0 */
- "GPIO132_C10", /* DAT1 */
- "GPIO133_B10", /* DAT2 */
- "GPIO134_B9", /* DAT3 */
- "GPIO135_A9", /* DAT4 */
- "GPIO136_C7", /* DAT5 */
- "GPIO137_A7", /* DAT6 */
- "GPIO138_C5"; /* DAT7 */
- ste,config = <&in_pu>;
- };
- };
-
- sdi2_sleep_mode: sdi2_sleep {
- sleep_cfg1 {
- pins = "GPIO128_A5"; /* CLK */
- ste,config = <&out_lo_wkup_pdis>;
- };
- sleep_cfg2 {
- pins =
- "GPIO130_C8", /* FBCLK */
- "GPIO129_B4"; /* CMD */
- ste,config = <&in_wkup_pdis_en>;
- };
- sleep_cfg3 {
- pins =
- "GPIO131_A12", /* DAT0 */
- "GPIO132_C10", /* DAT1 */
- "GPIO133_B10", /* DAT2 */
- "GPIO134_B9", /* DAT3 */
- "GPIO135_A9", /* DAT4 */
- "GPIO136_C7", /* DAT5 */
- "GPIO137_A7", /* DAT6 */
- "GPIO138_C5"; /* DAT7 */
- ste,config = <&in_wkup_pdis>;
- };
- };
- };
-
- sdi4 {
- /* This is the eMMC 8 bits wide, usually PCB-mounted eMMC */
- sdi4_default_mode: sdi4_default {
- default_mux {
- function = "mc4";
- groups = "mc4_a_1";
- };
- default_cfg1 {
- pins = "GPIO203_AE23"; /* CLK */
- ste,config = <&out_lo>;
- };
- default_cfg2 {
- pins = "GPIO202_AF25"; /* FBCLK */
- ste,config = <&in_nopull>;
- };
- default_cfg3 {
- pins =
- "GPIO201_AF24", /* CMD */
- "GPIO200_AH26", /* DAT0 */
- "GPIO199_AH23", /* DAT1 */
- "GPIO198_AG25", /* DAT2 */
- "GPIO197_AH24", /* DAT3 */
- "GPIO207_AJ23", /* DAT4 */
- "GPIO206_AG24", /* DAT5 */
- "GPIO205_AG23", /* DAT6 */
- "GPIO204_AF23"; /* DAT7 */
- ste,config = <&in_pu>;
- };
- };
-
- sdi4_sleep_mode: sdi4_sleep {
- sleep_cfg1 {
- pins = "GPIO203_AE23"; /* CLK */
- ste,config = <&out_lo_wkup_pdis>;
- };
- sleep_cfg2 {
- pins =
- "GPIO202_AF25", /* FBCLK */
- "GPIO201_AF24", /* CMD */
- "GPIO200_AH26", /* DAT0 */
- "GPIO199_AH23", /* DAT1 */
- "GPIO198_AG25", /* DAT2 */
- "GPIO197_AH24", /* DAT3 */
- "GPIO207_AJ23", /* DAT4 */
- "GPIO206_AG24", /* DAT5 */
- "GPIO205_AG23", /* DAT6 */
- "GPIO204_AF23"; /* DAT7 */
- ste,config = <&slpm_in_wkup_pdis>;
- };
- };
- };
-
- /*
- * Multi-rate serial ports (MSPs) - MSP3 output is internal and
- * cannot be muxed onto any pins.
- */
- msp0 {
- msp0_default_mode: msp0_default {
- default_msp0_mux {
- function = "msp0";
- groups = "msp0txrx_a_1", "msp0tfstck_a_1";
- };
- default_msp0_cfg {
- pins =
- "GPIO12_AC4", /* TXD */
- "GPIO15_AC3", /* RXD */
- "GPIO13_AF3", /* TFS */
- "GPIO14_AE3"; /* TCK */
- ste,config = <&in_nopull>;
- };
- };
- };
-
- msp1 {
- msp1_default_mode: msp1_default {
- default_mux {
- function = "msp1";
- groups = "msp1txrx_a_1", "msp1_a_1";
- };
- default_cfg1 {
- pins = "GPIO33_AF2";
- ste,config = <&out_lo>;
- };
- default_cfg2 {
- pins =
- "GPIO34_AE1",
- "GPIO35_AE2",
- "GPIO36_AG2";
- ste,config = <&in_nopull>;
- };
-
- };
- };
-
- msp2 {
- msp2_default_mode: msp2_default {
- /* MSP2 usually used for HDMI audio */
- default_mux {
- function = "msp2";
- groups = "msp2_a_1";
- };
- default_cfg1 {
- pins =
- "GPIO193_AH27", /* TXD */
- "GPIO194_AF27", /* TCK */
- "GPIO195_AG28"; /* TFS */
- ste,config = <&in_pd>;
- };
- default_cfg2 {
- pins = "GPIO196_AG26"; /* RXD */
- ste,config = <&out_lo>;
- };
- };
- };
-
-
- musb {
- musb_default_mode: musb_default {
- default_mux {
- function = "usb";
- groups = "usb_a_1";
- };
- default_cfg1 {
- pins =
- "GPIO256_AF28", /* NXT */
- "GPIO258_AD29", /* XCLK */
- "GPIO259_AC29", /* DIR */
- "GPIO260_AD28", /* DAT7 */
- "GPIO261_AD26", /* DAT6 */
- "GPIO262_AE26", /* DAT5 */
- "GPIO263_AG29", /* DAT4 */
- "GPIO264_AE27", /* DAT3 */
- "GPIO265_AD27", /* DAT2 */
- "GPIO266_AC28", /* DAT1 */
- "GPIO267_AC27"; /* DAT0 */
- ste,config = <&in_nopull>;
- };
- default_cfg2 {
- pins = "GPIO257_AE29"; /* STP */
- ste,config = <&out_hi>;
- };
- };
-
- musb_sleep_mode: musb_sleep {
- sleep_cfg1 {
- pins =
- "GPIO256_AF28", /* NXT */
- "GPIO258_AD29", /* XCLK */
- "GPIO259_AC29"; /* DIR */
- ste,config = <&slpm_wkup_pdis_en>;
- };
- sleep_cfg2 {
- pins = "GPIO257_AE29"; /* STP */
- ste,config = <&slpm_out_hi_wkup_pdis>;
- };
- sleep_cfg3 {
- pins =
- "GPIO260_AD28", /* DAT7 */
- "GPIO261_AD26", /* DAT6 */
- "GPIO262_AE26", /* DAT5 */
- "GPIO263_AG29", /* DAT4 */
- "GPIO264_AE27", /* DAT3 */
- "GPIO265_AD27", /* DAT2 */
- "GPIO266_AC28", /* DAT1 */
- "GPIO267_AC27"; /* DAT0 */
- ste,config = <&slpm_in_wkup_pdis_en>;
- };
- };
- };
-
mcde {
lcd_default_mode: lcd_default {
default_mux1 {
--
2.24.0
Powered by blists - more mailing lists