| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20191125122256.53482-2-stephan@gerhold.net>
Date: Mon, 25 Nov 2019 13:22:53 +0100
From: Stephan Gerhold <stephan@...hold.net>
To: Linus Walleij <linus.walleij@...aro.org>
Cc: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Stephan Gerhold <stephan@...hold.net>
Subject: [PATCH 2/5] ARM: dts: ux500: Rename generic pin configs according to pin group
Some components (e.g. SDI, I2C) can be used with different pin assignments.
Before we can add the alternative configurations, we need to rename the
current configurations to more generic names.
Each pin configuration usually configures one specific pin group.
Therefore we rename the configurations to use the pin group as name.
Make up for the slightly longer names by removing the "_mode" suffix.
Rename all existing uses to use the new labels.
Signed-off-by: Stephan Gerhold <stephan@...hold.net>
---
arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi | 58 ++++++++++-----------
arch/arm/boot/dts/ste-href.dtsi | 62 +++++++++++++----------
arch/arm/boot/dts/ste-snowball.dts | 52 +++++++++----------
3 files changed, 90 insertions(+), 82 deletions(-)
diff --git a/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi b/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi
index fbc41cacf690..b3ef91b98207 100644
--- a/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi
@@ -8,7 +8,7 @@
&pinctrl {
/* Settings for all UART default and sleep states */
uart0 {
- uart0_default_mode: uart0_default {
+ u0_a_1_default: u0_a_1_default {
default_mux {
function = "u0";
groups = "u0_a_1";
@@ -23,7 +23,7 @@
};
};
- uart0_sleep_mode: uart0_sleep {
+ u0_a_1_sleep: u0_a_1_sleep {
sleep_cfg1 {
pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
ste,config = <&slpm_in_wkup_pdis>;
@@ -40,7 +40,7 @@
};
uart1 {
- uart1_default_mode: uart1_default {
+ u1rxtx_a_1_default: u1rxtx_a_1_default {
default_mux {
function = "u1";
groups = "u1rxtx_a_1";
@@ -55,7 +55,7 @@
};
};
- uart1_sleep_mode: uart1_sleep {
+ u1rxtx_a_1_sleep: u1rxtx_a_1_sleep {
sleep_cfg1 {
pins = "GPIO4_AH6"; /* RXD */
ste,config = <&slpm_in_wkup_pdis>;
@@ -68,7 +68,7 @@
};
uart2 {
- uart2_default_mode: uart2_default {
+ u2rxtx_c_1_default: u2rxtx_c_1_default {
default_mux {
function = "u2";
groups = "u2rxtx_c_1";
@@ -83,7 +83,7 @@
};
};
- uart2_sleep_mode: uart2_sleep {
+ u2rxtx_c_1_sleep: u2rxtx_c_1_sleep {
sleep_cfg1 {
pins = "GPIO29_W2"; /* RXD */
ste,config = <&in_wkup_pdis>;
@@ -97,7 +97,7 @@
/* Settings for all I2C default and sleep states */
i2c0 {
- i2c0_default_mode: i2c_default {
+ i2c0_a_1_default: i2c0_a_1_default {
default_mux {
function = "i2c0";
groups = "i2c0_a_1";
@@ -108,7 +108,7 @@
};
};
- i2c0_sleep_mode: i2c_sleep {
+ i2c0_a_1_sleep: i2c0_a_1_sleep {
sleep_cfg1 {
pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
ste,config = <&slpm_in_wkup_pdis>;
@@ -117,7 +117,7 @@
};
i2c1 {
- i2c1_default_mode: i2c_default {
+ i2c1_b_2_default: i2c1_b_2_default {
default_mux {
function = "i2c1";
groups = "i2c1_b_2";
@@ -128,7 +128,7 @@
};
};
- i2c1_sleep_mode: i2c_sleep {
+ i2c1_b_2_sleep: i2c1_b_2_sleep {
sleep_cfg1 {
pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
ste,config = <&slpm_in_wkup_pdis>;
@@ -137,7 +137,7 @@
};
i2c2 {
- i2c2_default_mode: i2c_default {
+ i2c2_b_2_default: i2c2_b_2_default {
default_mux {
function = "i2c2";
groups = "i2c2_b_2";
@@ -148,7 +148,7 @@
};
};
- i2c2_sleep_mode: i2c_sleep {
+ i2c2_b_2_sleep: i2c2_b_2_sleep {
sleep_cfg1 {
pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
ste,config = <&slpm_in_wkup_pdis>;
@@ -157,7 +157,7 @@
};
i2c3 {
- i2c3_default_mode: i2c_default {
+ i2c3_c_2_default: i2c3_c_2_default {
default_mux {
function = "i2c3";
groups = "i2c3_c_2";
@@ -168,7 +168,7 @@
};
};
- i2c3_sleep_mode: i2c_sleep {
+ i2c3_c_2_sleep: i2c3_c_2_sleep {
sleep_cfg1 {
pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
ste,config = <&slpm_in_wkup_pdis>;
@@ -181,7 +181,7 @@
* enable I2C4 and UART1 at the same time.
*/
i2c4 {
- i2c4_default_mode: i2c_default {
+ i2c4_b_1_default: i2c4_b_1_default {
default_mux {
function = "i2c4";
groups = "i2c4_b_1";
@@ -192,7 +192,7 @@
};
};
- i2c4_sleep_mode: i2c_sleep {
+ i2c4_b_1_sleep: i2c4_b_1_sleep {
sleep_cfg1 {
pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
ste,config = <&slpm_in_wkup_pdis>;
@@ -203,7 +203,7 @@
/* Settings for all MMC/SD/SDIO default and sleep states */
sdi0 {
/* This is the external SD card slot, 4 bits wide */
- sdi0_default_mode: sdi0_default {
+ mc0_a_1_default: mc0_a_1_default {
default_mux {
function = "mc0";
groups = "mc0_a_1";
@@ -234,7 +234,7 @@
};
};
- sdi0_sleep_mode: sdi0_sleep {
+ mc0_a_1_sleep: mc0_a_1_sleep {
sleep_cfg1 {
pins =
"GPIO18_AC2", /* CMDDIR */
@@ -261,7 +261,7 @@
sdi1 {
/* This is the WLAN SDIO 4 bits wide */
- sdi1_default_mode: sdi1_default {
+ mc1_a_1_default: mc1_a_1_default {
default_mux {
function = "mc1";
groups = "mc1_a_1";
@@ -285,7 +285,7 @@
};
};
- sdi1_sleep_mode: sdi1_sleep {
+ mc1_a_1_sleep: mc1_a_1_sleep {
sleep_cfg1 {
pins = "GPIO208_AH16"; /* CLK */
ste,config = <&slpm_out_lo_wkup_pdis>;
@@ -305,7 +305,7 @@
sdi2 {
/* This is the eMMC 8 bits wide, usually PoP eMMC */
- sdi2_default_mode: sdi2_default {
+ mc2_a_1_default: mc2_a_1_default {
default_mux {
function = "mc2";
groups = "mc2_a_1";
@@ -333,7 +333,7 @@
};
};
- sdi2_sleep_mode: sdi2_sleep {
+ mc2_a_1_sleep: mc2_a_1_sleep {
sleep_cfg1 {
pins = "GPIO128_A5"; /* CLK */
ste,config = <&out_lo_wkup_pdis>;
@@ -361,7 +361,7 @@
sdi4 {
/* This is the eMMC 8 bits wide, usually PCB-mounted eMMC */
- sdi4_default_mode: sdi4_default {
+ mc4_a_1_default: mc4_a_1_default {
default_mux {
function = "mc4";
groups = "mc4_a_1";
@@ -389,7 +389,7 @@
};
};
- sdi4_sleep_mode: sdi4_sleep {
+ mc4_a_1_sleep: mc4_a_1_sleep {
sleep_cfg1 {
pins = "GPIO203_AE23"; /* CLK */
ste,config = <&out_lo_wkup_pdis>;
@@ -416,7 +416,7 @@
* cannot be muxed onto any pins.
*/
msp0 {
- msp0_default_mode: msp0_default {
+ msp0txrxtfstck_a_1_default: msp0txrxtfstck_a_1_default {
default_msp0_mux {
function = "msp0";
groups = "msp0txrx_a_1", "msp0tfstck_a_1";
@@ -433,7 +433,7 @@
};
msp1 {
- msp1_default_mode: msp1_default {
+ msp1txrx_a_1_default: msp1txrx_a_1_default {
default_mux {
function = "msp1";
groups = "msp1txrx_a_1", "msp1_a_1";
@@ -453,7 +453,7 @@
};
msp2 {
- msp2_default_mode: msp2_default {
+ msp2_a_1_default: msp2_a_1_default {
/* MSP2 usually used for HDMI audio */
default_mux {
function = "msp2";
@@ -474,7 +474,7 @@
};
musb {
- musb_default_mode: musb_default {
+ usb_a_1_default: usb_a_1_default {
default_mux {
function = "usb";
groups = "usb_a_1";
@@ -500,7 +500,7 @@
};
};
- musb_sleep_mode: musb_sleep {
+ usb_a_1_sleep: usb_a_1_sleep {
sleep_cfg1 {
pins =
"GPIO256_AF28", /* NXT */
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 4f6acbd8c040..7613a40421d5 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -16,41 +16,41 @@
soc {
uart@...20000 {
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&uart0_default_mode>;
- pinctrl-1 = <&uart0_sleep_mode>;
+ pinctrl-0 = <&u0_a_1_default>;
+ pinctrl-1 = <&u0_a_1_sleep>;
status = "okay";
};
/* This UART is unused and thus left disabled */
uart@...21000 {
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&uart1_default_mode>;
- pinctrl-1 = <&uart1_sleep_mode>;
+ pinctrl-0 = <&u1rxtx_a_1_default>;
+ pinctrl-1 = <&u1rxtx_a_1_sleep>;
};
uart@...07000 {
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&uart2_default_mode>;
- pinctrl-1 = <&uart2_sleep_mode>;
+ pinctrl-0 = <&u2rxtx_c_1_default>;
+ pinctrl-1 = <&u2rxtx_c_1_sleep>;
status = "okay";
};
i2c@...04000 {
pinctrl-names = "default","sleep";
- pinctrl-0 = <&i2c0_default_mode>;
- pinctrl-1 = <&i2c0_sleep_mode>;
+ pinctrl-0 = <&i2c0_a_1_default>;
+ pinctrl-1 = <&i2c0_a_1_sleep>;
};
i2c@...22000 {
pinctrl-names = "default","sleep";
- pinctrl-0 = <&i2c1_default_mode>;
- pinctrl-1 = <&i2c1_sleep_mode>;
+ pinctrl-0 = <&i2c1_b_2_default>;
+ pinctrl-1 = <&i2c1_b_2_sleep>;
};
i2c@...28000 {
pinctrl-names = "default","sleep";
- pinctrl-0 = <&i2c2_default_mode>;
- pinctrl-1 = <&i2c2_sleep_mode>;
+ pinctrl-0 = <&i2c2_b_2_default>;
+ pinctrl-1 = <&i2c2_b_2_sleep>;
lp5521@33 {
compatible = "national,lp5521";
reg = <0x33>;
@@ -96,8 +96,8 @@
i2c@...10000 {
pinctrl-names = "default","sleep";
- pinctrl-0 = <&i2c3_default_mode>;
- pinctrl-1 = <&i2c3_sleep_mode>;
+ pinctrl-0 = <&i2c3_c_2_default>;
+ pinctrl-1 = <&i2c3_c_2_sleep>;
};
/* ST6G3244ME level translator for 1.8/2.9 V */
@@ -132,8 +132,8 @@
vmmc-supply = <&ab8500_ldo_aux3_reg>;
vqmmc-supply = <&vmmci>;
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdi0_default_mode>;
- pinctrl-1 = <&sdi0_sleep_mode>;
+ pinctrl-0 = <&mc0_a_1_default &sdi0_default_mode>;
+ pinctrl-1 = <&mc0_a_1_sleep>;
status = "okay";
};
@@ -145,8 +145,8 @@
bus-width = <4>;
non-removable;
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdi1_default_mode>;
- pinctrl-1 = <&sdi1_sleep_mode>;
+ pinctrl-0 = <&mc1_a_1_default>;
+ pinctrl-1 = <&mc1_a_1_sleep>;
status = "okay";
};
@@ -160,8 +160,8 @@
non-removable;
vmmc-supply = <&db8500_vsmps2_reg>;
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdi2_default_mode>;
- pinctrl-1 = <&sdi2_sleep_mode>;
+ pinctrl-0 = <&mc2_a_1_default>;
+ pinctrl-1 = <&mc2_a_1_sleep>;
status = "okay";
};
@@ -175,27 +175,27 @@
non-removable;
vmmc-supply = <&ab8500_ldo_aux2_reg>;
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdi4_default_mode>;
- pinctrl-1 = <&sdi4_sleep_mode>;
+ pinctrl-0 = <&mc4_a_1_default>;
+ pinctrl-1 = <&mc4_a_1_sleep>;
status = "okay";
};
msp0: msp@...23000 {
pinctrl-names = "default";
- pinctrl-0 = <&msp0_default_mode>;
+ pinctrl-0 = <&msp0txrxtfstck_a_1_default>;
status = "okay";
};
msp1: msp@...24000 {
pinctrl-names = "default";
- pinctrl-0 = <&msp1_default_mode>;
+ pinctrl-0 = <&msp1txrx_a_1_default>;
status = "okay";
};
msp2: msp@...17000 {
pinctrl-names = "default";
- pinctrl-0 = <&msp2_default_mode>;
+ pinctrl-0 = <&msp2_a_1_default>;
};
msp3: msp@...25000 {
@@ -209,8 +209,8 @@
ab8500_usb {
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&musb_default_mode>;
- pinctrl-1 = <&musb_sleep_mode>;
+ pinctrl-0 = <&usb_a_1_default>;
+ pinctrl-1 = <&usb_a_1_sleep>;
};
ab8500-regulators {
@@ -257,6 +257,14 @@
};
};
+ pinctrl {
+ sdi0 {
+ sdi0_default_mode: sdi0_default {
+ /* Some boards set additional settings here */
+ };
+ };
+ };
+
mcde@...50000 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&lcd_default_mode>;
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 566b35ac0d0c..8b80dcdf6e5b 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -156,19 +156,19 @@
msp0: msp@...23000 {
pinctrl-names = "default";
- pinctrl-0 = <&msp0_default_mode>;
+ pinctrl-0 = <&msp0txrxtfstck_a_1_default>;
status = "okay";
};
msp1: msp@...24000 {
pinctrl-names = "default";
- pinctrl-0 = <&msp1_default_mode>;
+ pinctrl-0 = <&msp1txrx_a_1_default>;
status = "okay";
};
msp2: msp@...17000 {
pinctrl-names = "default";
- pinctrl-0 = <&msp2_default_mode>;
+ pinctrl-0 = <&msp2_a_1_default>;
};
msp3: msp@...25000 {
@@ -238,8 +238,8 @@
vmmc-supply = <&ab8500_ldo_aux3_reg>;
vqmmc-supply = <&vmmci>;
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdi0_default_mode>;
- pinctrl-1 = <&sdi0_sleep_mode>;
+ pinctrl-0 = <&mc0_a_1_default &sdi0_default_mode>;
+ pinctrl-1 = <&mc0_a_1_sleep>;
/* GPIO218 MMC_CD */
cd-gpios = <&gpio6 26 GPIO_ACTIVE_LOW>;
@@ -253,8 +253,8 @@
max-frequency = <100000000>;
bus-width = <4>;
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdi1_default_mode>;
- pinctrl-1 = <&sdi1_sleep_mode>;
+ pinctrl-0 = <&mc1_a_1_default>;
+ pinctrl-1 = <&mc1_a_1_sleep>;
status = "okay";
};
@@ -263,7 +263,7 @@
sdi2_per3@...05000 {
arm,primecell-periphid = <0x10480180>;
pinctrl-names = "default";
- pinctrl-0 = <&sdi2_sleep_mode>;
+ pinctrl-0 = <&mc2_a_1_sleep>;
status = "okay";
};
@@ -276,49 +276,49 @@
cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux2_reg>;
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdi4_default_mode>;
- pinctrl-1 = <&sdi4_sleep_mode>;
+ pinctrl-0 = <&mc4_a_1_default>;
+ pinctrl-1 = <&mc4_a_1_sleep>;
status = "okay";
};
uart@...20000 {
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&uart0_default_mode>;
- pinctrl-1 = <&uart0_sleep_mode>;
+ pinctrl-0 = <&u0_a_1_default>;
+ pinctrl-1 = <&u0_a_1_sleep>;
status = "okay";
};
/* This UART is unused and thus left disabled */
uart@...21000 {
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&uart1_default_mode>;
- pinctrl-1 = <&uart1_sleep_mode>;
+ pinctrl-0 = <&u1rxtx_a_1_default>;
+ pinctrl-1 = <&u1rxtx_a_1_sleep>;
};
uart@...07000 {
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&uart2_default_mode>;
- pinctrl-1 = <&uart2_sleep_mode>;
+ pinctrl-0 = <&u2rxtx_c_1_default>;
+ pinctrl-1 = <&u2rxtx_c_1_sleep>;
status = "okay";
};
i2c@...04000 {
pinctrl-names = "default","sleep";
- pinctrl-0 = <&i2c0_default_mode>;
- pinctrl-1 = <&i2c0_sleep_mode>;
+ pinctrl-0 = <&i2c0_a_1_default>;
+ pinctrl-1 = <&i2c0_a_1_sleep>;
};
i2c@...22000 {
pinctrl-names = "default","sleep";
- pinctrl-0 = <&i2c1_default_mode>;
- pinctrl-1 = <&i2c1_sleep_mode>;
+ pinctrl-0 = <&i2c1_b_2_default>;
+ pinctrl-1 = <&i2c1_b_2_sleep>;
};
i2c@...28000 {
pinctrl-names = "default","sleep";
- pinctrl-0 = <&i2c2_default_mode>;
- pinctrl-1 = <&i2c2_sleep_mode>;
+ pinctrl-0 = <&i2c2_b_2_default>;
+ pinctrl-1 = <&i2c2_b_2_sleep>;
lsm303dlh@18 {
/* Accelerometer */
compatible = "st,lsm303dlh-accel";
@@ -367,8 +367,8 @@
i2c@...10000 {
pinctrl-names = "default","sleep";
- pinctrl-0 = <&i2c3_default_mode>;
- pinctrl-1 = <&i2c3_sleep_mode>;
+ pinctrl-0 = <&i2c3_c_2_default>;
+ pinctrl-1 = <&i2c3_c_2_sleep>;
};
spi@...02000 {
@@ -402,8 +402,8 @@
ab8500_usb {
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&musb_default_mode>;
- pinctrl-1 = <&musb_sleep_mode>;
+ pinctrl-0 = <&usb_a_1_default>;
+ pinctrl-1 = <&usb_a_1_sleep>;
};
ext_regulators: ab8500-ext-regulators {
--
2.24.0
Powered by blists - more mailing lists