linux-kernel - Re: [PATCH 4/5] ARM: dts: ux500: Add pin configs for UART1 CTS/RTS pins

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 25 Nov 2019 15:17:40 +0100
From:   Stephan Gerhold <stephan@...hold.net>
To:     Linus Walleij <linus.walleij@...aro.org>
Cc:     Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH 4/5] ARM: dts: ux500: Add pin configs for UART1 CTS/RTS
 pins

On Mon, Nov 25, 2019 at 01:22:55PM +0100, Stephan Gerhold wrote:
> UART1 an be optionally used with additional CTS/RTS pins.

s/an/can, duh.
I will fix this if a v2 is needed for some reason; otherwise,
can you fix this when applying the patch?

Thanks!

> The pinctrl driver has an extra "u1ctsrts_a_1" pin group for them.
> 
> Add a new pin configuration to configure them correctly if needed.
> 
> Signed-off-by: Stephan Gerhold <stephan@...hold.net>
> ---
>  arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi | 26 +++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi b/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi
> index b6d0a60e9aed..e85a08ad2ea7 100644
> --- a/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi
> @@ -65,6 +65,32 @@
>  				ste,config = <&slpm_out_wkup_pdis>;
>  			};
>  		};
> +
> +		u1ctsrts_a_1_default: u1ctsrts_a_1_default {
> +			default_mux {
> +				function = "u1";
> +				groups = "u1ctsrts_a_1";
> +			};
> +			default_cfg1 {
> +				pins = "GPIO6_AF6"; /* CTS */
> +				ste,config = <&in_pu>;
> +			};
> +			default_cfg2 {
> +				pins = "GPIO7_AG5"; /* RTS */
> +				ste,config = <&out_hi>;
> +			};
> +		};
> +
> +		u1ctsrts_a_1_sleep: u1ctsrts_a_1_sleep {
> +			sleep_cfg1 {
> +				pins = "GPIO6_AF6"; /* CTS */
> +				ste,config = <&slpm_in_wkup_pdis>;
> +			};
> +			sleep_cfg2 {
> +				pins = "GPIO7_AG5"; /* RTS */
> +				ste,config = <&slpm_out_hi_wkup_pdis>;
> +			};
> +		};
>  	};
>  
>  	uart2 {
> -- 
> 2.24.0
>