[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191126091946.7970-4-nsaenzjulienne@suse.de>
Date: Tue, 26 Nov 2019 10:19:41 +0100
From: Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
To: andrew.murray@....com, maz@...nel.org,
linux-kernel@...r.kernel.org, Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Eric Anholt <eric@...olt.net>, Stefan Wahren <wahrenst@....net>
Cc: james.quinlan@...adcom.com, mbrugger@...e.com,
f.fainelli@...il.com, phil@...pberrypi.org, jeremy.linton@....com,
linux-pci@...r.kernel.org, linux-rpi-kernel@...ts.infradead.org,
Nicolas Saenz Julienne <nsaenzjulienne@...e.de>,
devicetree@...r.kernel.org, bcm-kernel-feedback-list@...adcom.com,
linux-arm-kernel@...ts.infradead.org
Subject: [PATCH v3 3/7] ARM: dts: bcm2711: Enable PCIe controller
This enables bcm2711's PCIe bus, which is hardwired to a VIA
Technologies XHCI USB 3.0 controller.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
---
This will likely need a rebase once the RPi GENET patches land.
Changes since v2:
- Remove unused interrupt-map
- correct dma-ranges to it's full size, non power of 2 bus DMA
constraints now supported in linux-next[1]
- add device_type
- rename alias from pcie_0 to pcie0
Changes since v1:
- remove linux,pci-domain
[1] https://lkml.org/lkml/2019/11/21/235
arch/arm/boot/dts/bcm2711.dtsi | 41 ++++++++++++++++++++++++++++++++++
1 file changed, 41 insertions(+)
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 667658497898..2e121fc8b3d0 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -288,6 +288,47 @@ IRQ_TYPE_LEVEL_LOW)>,
arm,cpu-registers-not-fw-configured;
};
+ scb {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ ranges = <0x0 0x7c000000 0x0 0xfc000000 0x03800000>,
+ <0x6 0x00000000 0x6 0x00000000 0x40000000>;
+
+ pcie0: pcie@...00000 {
+ compatible = "brcm,bcm2711-pcie";
+ reg = <0x0 0x7d500000 0x9310>;
+ device_type = "pci";
+ #address-cells = <3>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pcie", "msi";
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
+ IRQ_TYPE_LEVEL_HIGH>;
+ msi-controller;
+ msi-parent = <&pcie0>;
+
+ ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000
+ 0x0 0x04000000>;
+ /*
+ * The wrapper around the PCIe block has a bug
+ * preventing it from accessing beyond the first 3GB of
+ * memory. As the bus DMA mask is rounded up to the
+ * closest power of two of the dma-range size, we're
+ * forced to set the limit at 2GB. This can be
+ * harmlessly changed in the future once the DMA code
+ * handles non power of two DMA limits.
+ */
+ dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000
+ 0x0 0xc0000000>;
+ brcm,enable-ssc;
+ };
+ };
+
cpus: cpus {
#address-cells = <1>;
#size-cells = <0>;
--
2.24.0
Powered by blists - more mailing lists