[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <26c9cb9434fe59b61884e0e43d116fbff6c8590a.camel@suse.de>
Date: Tue, 26 Nov 2019 10:43:39 +0100
From: Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
To: Phil Elwell <phil@...pberrypi.org>, andrew.murray@....com,
maz@...nel.org, linux-kernel@...r.kernel.org,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Eric Anholt <eric@...olt.net>, Stefan Wahren <wahrenst@....net>
Cc: james.quinlan@...adcom.com, mbrugger@...e.com,
f.fainelli@...il.com, jeremy.linton@....com,
linux-pci@...r.kernel.org, linux-rpi-kernel@...ts.infradead.org,
devicetree@...r.kernel.org, bcm-kernel-feedback-list@...adcom.com,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v3 3/7] ARM: dts: bcm2711: Enable PCIe controller
On Tue, 2019-11-26 at 09:37 +0000, Phil Elwell wrote:
> Hi Nicolas,
>
> On 26/11/2019 09:19, Nicolas Saenz Julienne wrote:
> > This enables bcm2711's PCIe bus, which is hardwired to a VIA
> > Technologies XHCI USB 3.0 controller.
> >
> > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
> >
> > ---
> >
> > This will likely need a rebase once the RPi GENET patches land.
> >
> > Changes since v2:
> > - Remove unused interrupt-map
> > - correct dma-ranges to it's full size, non power of 2 bus DMA
> > constraints now supported in linux-next[1]
> > - add device_type
> > - rename alias from pcie_0 to pcie0
> >
> > Changes since v1:
> > - remove linux,pci-domain
> >
> > [1] https://lkml.org/lkml/2019/11/21/235
> >
> > arch/arm/boot/dts/bcm2711.dtsi | 41 ++++++++++++++++++++++++++++++++++
> > 1 file changed, 41 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
> > index 667658497898..2e121fc8b3d0 100644
> > --- a/arch/arm/boot/dts/bcm2711.dtsi
> > +++ b/arch/arm/boot/dts/bcm2711.dtsi
> > @@ -288,6 +288,47 @@ IRQ_TYPE_LEVEL_LOW)>,
> > arm,cpu-registers-not-fw-configured;
> > };
> >
> > + scb {
> > + compatible = "simple-bus";
> > + #address-cells = <2>;
> > + #size-cells = <1>;
> > +
> > + ranges = <0x0 0x7c000000 0x0 0xfc000000 0x03800000>,
> > + <0x6 0x00000000 0x6 0x00000000 0x40000000>;
> > +
> > + pcie0: pcie@...00000 {
> > + compatible = "brcm,bcm2711-pcie";
> > + reg = <0x0 0x7d500000 0x9310>;
> > + device_type = "pci";
> > + #address-cells = <3>;
> > + #interrupt-cells = <1>;
> > + #size-cells = <2>;
> > + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-names = "pcie", "msi";
> > + interrupt-map-mask = <0x0 0x0 0x0 0x7>;
> > + interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
> > + IRQ_TYPE_LEVEL_HIGH>;
> > + msi-controller;
> > + msi-parent = <&pcie0>;
> > +
> > + ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000
> > + 0x0 0x04000000>;
> > + /*
> > + * The wrapper around the PCIe block has a bug
> > + * preventing it from accessing beyond the first 3GB of
> > + * memory. As the bus DMA mask is rounded up to the
> > + * closest power of two of the dma-range size, we're
> > + * forced to set the limit at 2GB. This can be
> > + * harmlessly changed in the future once the DMA code
> > + * handles non power of two DMA limits.
> > + */
> > + dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000
> > + 0x0 0xc0000000>;
>
> The comment doesn't match the data here - I think for now the size field
> needs to be reduced to 2GB to match the comment.
You're right, my bad, should've edited it out. The good part is that with this
commit[1], which will soon be in Linus' tree, we don't need to fake dma-ranges
size anymore.
So for the record, the comment should state the following:
/*
* The wrapper around the PCIe block has a bug
* preventing it from accessing beyond the first 3GB of
* memory.
*/
Regards,
Nicolas
[1] https://lkml.org/lkml/2019/11/21/235
Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)
Powered by blists - more mailing lists