[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191127052935.1719897-1-anarsoul@gmail.com>
Date: Tue, 26 Nov 2019 21:29:28 -0800
From: Vasily Khoruzhick <anarsoul@...il.com>
To: Yangtao Li <tiny.windzz@...il.com>,
Zhang Rui <rui.zhang@...el.com>,
Eduardo Valentin <edubezval@...il.com>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Amit Kucheria <amit.kucheria@...durent.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Maxime Ripard <mripard@...nel.org>,
Chen-Yu Tsai <wens@...e.org>,
Mauro Carvalho Chehab <mchehab+samsung@...nel.org>,
"David S. Miller" <davem@...emloft.net>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
linux-pm@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
Ondřej Jirman <megous@...ous.com>,
linux-kernel@...r.kernel.org
Cc: Vasily Khoruzhick <anarsoul@...il.com>
Subject: [PATCH v6 0/7] add thermal sensor driver for A64, A83T, H3, H5, H6, R40
This patchset adds driver for thermal sensor in A64, A83T, H3, H5,
H6 and R40 SoCs.
v6:
- [ondrej, vasily] Squash all driver related changes into a
single patch
- [ondrej] Rename calib -> calibration
- [ondrej] Fix thermal zone registration check
- [ondrej] Lower rate of sensor data interrupts to 4/sec/sensor
- [ondrej] Rework scale/offset values, H6 calibration
- [ondrej] Explicitly set mod clock to 24 MHz
- [ondrej] Set undocumented bits in CTRL0 for H6
- [ondrej] Add support for A83T
- [ondrej] Add dts changes for A83T, H3, H5, H6
- [vasily] Add dts changes for A64
- [vasily] Address Maxime's comments for YAML scheme
- [vasily] Make .calc_temp callback mandatory
- [vasily] Set .max_register in regmap config, so regs can be
inspected using debugfs
Ondrej Jirman (4):
ARM: dts: sun8i-a83t: Add thermal sensor and thermal zones
ARM: dts: sun8i-h3: Add thermal sensor and thermal zones
arm64: dts: allwinner: sun50i-h5: Add thermal sensor and thermal zones
arm64: dts: allwinner: sun50i-h6: Add thermal sensor and thermal zones
Vasily Khoruzhick (1):
arm64: dts: allwinner: a64: Add thermal sensors and thermal zones
Yangtao Li (2):
thermal: sun8i: add thermal driver for H6/H5/H3/A64/R40
dt-bindings: thermal: add YAML schema for sun8i-thermal driver
bindings
.../thermal/allwinner,sun8i-a83t-ths.yaml | 103 +++
MAINTAINERS | 7 +
arch/arm/boot/dts/sun8i-a83t.dtsi | 36 +
arch/arm/boot/dts/sun8i-h3.dtsi | 26 +
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 42 ++
arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 32 +
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 33 +
drivers/thermal/Kconfig | 14 +
drivers/thermal/Makefile | 1 +
drivers/thermal/sun8i_thermal.c | 643 ++++++++++++++++++
10 files changed, 937 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
create mode 100644 drivers/thermal/sun8i_thermal.c
--
2.24.0
Powered by blists - more mailing lists