| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 29 Nov 2019 12:02:53 +0100
From: Alexandre Belloni <alexandre.belloni@...tlin.com>
To: Claudiu.Beznea@...rochip.com
Cc: kamel.bouhara@...tlin.com, sre@...nel.org,
Nicolas.Ferre@...rochip.com, Ludovic.Desroches@...rochip.com,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-pm@...r.kernel.org, thomas.petazzoni@...tlin.com
Subject: Re: [PATCH] power: reset: at91-reset: add sysfs interface to the
power on reason
On 29/11/2019 10:57:45+0000, Claudiu.Beznea@...rochip.com wrote:
> Hi Kamel,
>
> On 17.10.2019 15:40, Kamel Bouhara wrote:
> > This patch export the power on reason through the sysfs interface and
> > introduce some generic reset sources.
> > Update the ABI documentation to list current power on sources.
> >
> > Signed-off-by: Kamel Bouhara <kamel.bouhara@...tlin.com>
> > ---
> > .../sysfs-devices-platform-power-on-reason | 14 ++++++
> > drivers/power/reset/at91-reset.c | 44 +++++++++++++------
> > include/linux/power/power_on_reason.h | 19 ++++++++
> > 3 files changed, 64 insertions(+), 13 deletions(-)
> > create mode 100644 Documentation/ABI/testing/sysfs-devices-platform-power-on-reason
> > create mode 100644 include/linux/power/power_on_reason.h
> >
> > diff --git a/Documentation/ABI/testing/sysfs-devices-platform-power-on-reason b/Documentation/ABI/testing/sysfs-devices-platform-power-on-reason
> > new file mode 100644
> > index 000000000000..83daeb9b1aa2
> > --- /dev/null
> > +++ b/Documentation/ABI/testing/sysfs-devices-platform-power-on-reason
> > @@ -0,0 +1,14 @@
> > +What: /sys/devices/platform/.../power_on_reason
> > +
> > +Date: October 2019
> > +KernelVersion: 5.4
> > +Contact: Kamel Bouhara <kamel.bouhara@...tlin.com>
> > +Description: This file shows system power on reason.
> > + The possible sources are:
> > + General System Power-ON, RTC wakeup, Watchdog timeout,
> > + Software Reset, User pressed reset button,
> > + CPU Clock failure, 32.768kHz Oscillator Failure,
> > + Low power mode exit, Unknown.
> > +
> > + The file is read only.
> > +
> > diff --git a/drivers/power/reset/at91-reset.c b/drivers/power/reset/at91-reset.c
> > index 44ca983a49a1..3cb2df40af37 100644
> > --- a/drivers/power/reset/at91-reset.c
> > +++ b/drivers/power/reset/at91-reset.c
> > @@ -17,7 +17,7 @@
> > #include <linux/of_address.h>
> > #include <linux/platform_device.h>
> > #include <linux/reboot.h>
> > -
> > +#include <linux/power/power_on_reason.h>
> > #include <soc/at91/at91sam9_ddrsdr.h>
> > #include <soc/at91/at91sam9_sdramc.h>
> >
> > @@ -146,42 +146,42 @@ static int samx7_restart(struct notifier_block *this, unsigned long mode,
> > return NOTIFY_DONE;
> > }
> >
> > -static void __init at91_reset_status(struct platform_device *pdev)
> > +static const char *at91_reset_reason(struct platform_device *pdev)
> > {
> > const char *reason;
> > u32 reg = readl(at91_rstc_base + AT91_RSTC_SR);
> >
> > switch ((reg & AT91_RSTC_RSTTYP) >> 8) {
> > case RESET_TYPE_GENERAL:
> > - reason = "general reset";
> > + reason = POWER_ON_REASON_GENERAL;
> > break;
> > case RESET_TYPE_WAKEUP:
> > - reason = "wakeup";
> > + reason = POWER_ON_REASON_RTC;
> > break;
> > case RESET_TYPE_WATCHDOG:
> > - reason = "watchdog reset";
> > + reason = POWER_ON_REASON_WATCHDOG;
> > break;
> > case RESET_TYPE_SOFTWARE:
> > - reason = "software reset";
> > + reason = POWER_ON_REASON_SOFTWARE;
> > break;
> > case RESET_TYPE_USER:
> > - reason = "user reset";
> > + reason = POWER_ON_REASON_USER;
> > break;
> > case RESET_TYPE_CPU_FAIL:
> > - reason = "CPU clock failure detection";
> > + reason = POWER_ON_REASON_CPU_FAIL;
> > break;
> > case RESET_TYPE_XTAL_FAIL:
> > - reason = "32.768 kHz crystal failure detection";
> > + reason = POWER_ON_REASON_XTAL_FAIL;
> > break;
> > case RESET_TYPE_ULP2:
> > - reason = "ULP2 reset";
> > + reason = POWER_ON_REASON_LOW_POWER;
> > break;
> > default:
> > - reason = "unknown reset";
> > + reason = POWER_ON_REASON_UNKNOWN;
> > break;
> > }
> >
> > - dev_info(&pdev->dev, "Starting after %s\n", reason);
> > + return reason;
> > }
> >
> > static const struct of_device_id at91_ramc_of_match[] = {
> > @@ -204,6 +204,17 @@ static struct notifier_block at91_restart_nb = {
> > .priority = 192,
> > };
> >
> > +static ssize_t power_on_reason_show(struct device *dev,
> > + struct device_attribute *attr,
> > + char *buf)
> > +{
> > + struct platform_device *pdev = to_platform_device(dev);
> > +
> > + return sprintf(buf, "%s\n", at91_reset_reason(pdev));
> > +}
> > +
> > +static DEVICE_ATTR_RO(power_on_reason);
> > +
> > static int __init at91_reset_probe(struct platform_device *pdev)
> > {
> > const struct of_device_id *match;
> > @@ -248,7 +259,14 @@ static int __init at91_reset_probe(struct platform_device *pdev)
> > return ret;
> > }
> >
> > - at91_reset_status(pdev);
> > + ret = device_create_file(&pdev->dev, &dev_attr_power_on_reason);
> > + if (ret) {
> > + dev_err(&pdev->dev, "Could not create sysfs entry\n");
> > + return ret;
> > + }
> > +
> > + dev_info(&pdev->dev, "Starting after %s reset\n",
> > + at91_reset_reason(pdev));
> >
> > return 0;
> > }
> > diff --git a/include/linux/power/power_on_reason.h b/include/linux/power/power_on_reason.h
> > new file mode 100644
> > index 000000000000..9978cc757427
> > --- /dev/null
> > +++ b/include/linux/power/power_on_reason.h
> > @@ -0,0 +1,19 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/*
> > + * Author: Kamel Bouhra <kamel.bouhara@...tlin.com>
> > + */
> > +
> > +#ifndef POWER_ON_REASON_H
> > +#define POWER_ON_REASON_H
> > +
> > +#define POWER_ON_REASON_GENERAL "General"
> > +#define POWER_ON_REASON_RTC "RTC wakeup"
> > +#define POWER_ON_REASON_WATCHDOG "Watchdog timeout"
> > +#define POWER_ON_REASON_SOFTWARE "Software"
> > +#define POWER_ON_REASON_USER "User"
> > +#define POWER_ON_REASON_CPU_FAIL "CPU Clock Failure"
> > +#define POWER_ON_REASON_XTAL_FAIL "32.768k Crystal oscillator Failure"
> > +#define POWER_ON_REASON_LOW_POWER "Low power exit"
> > +#define POWER_ON_REASON_UNKNOWN "Unknown"
> > +
> > +#endif /* POWER_ON_REASON_H */
>
> Is this new header necessary?
>
Yes because we want other drivers to be able to reuse them as-is so the
ABI is stable.
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Powered by blists - more mailing lists