[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20191129144605.182774-3-jian.hu@amlogic.com>
Date: Fri, 29 Nov 2019 22:46:00 +0800
From: Jian Hu <jian.hu@...ogic.com>
To: Jerome Brunet <jbrunet@...libre.com>,
Neil Armstrong <narmstrong@...libre.com>
CC: Jian Hu <jian.hu@...ogic.com>, Kevin Hilman <khilman@...libre.com>,
Rob Herring <robh@...nel.org>,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Qiufang Dai <qiufang.dai@...ogic.com>,
Jianxin Pan <jianxin.pan@...ogic.com>,
Victor Wan <victor.wan@...ogic.com>,
Chandle Zou <chandle.zou@...ogic.com>,
<linux-clk@...r.kernel.org>, <linux-amlogic@...ts.infradead.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>
Subject: [PATCH v3 2/7] clk: meson: add support for A1 PLL clock ops
The A1 PLL design is different with previous SoCs. The PLL
internal analog modules Power-on sequence is different
with previous, and thus requires a strict register sequence to
enable the PLL.
Signed-off-by: Jian Hu <jian.hu@...ogic.com>
---
drivers/clk/meson/clk-pll.c | 21 +++++++++++++++++++++
drivers/clk/meson/clk-pll.h | 1 +
drivers/clk/meson/parm.h | 1 +
3 files changed, 23 insertions(+)
diff --git a/drivers/clk/meson/clk-pll.c b/drivers/clk/meson/clk-pll.c
index ddb1e5634739..4aff31a51589 100644
--- a/drivers/clk/meson/clk-pll.c
+++ b/drivers/clk/meson/clk-pll.c
@@ -318,6 +318,23 @@ static int meson_clk_pll_enable(struct clk_hw *hw)
struct clk_regmap *clk = to_clk_regmap(hw);
struct meson_clk_pll_data *pll = meson_clk_pll_data(clk);
+ /*
+ * The A1 design is different with previous SoCs.The PLL
+ * internal analog modules Power-on sequence is different with
+ * previous, and thus requires a strict register sequence to
+ * enable the PLL.
+ */
+ if (MESON_PARM_APPLICABLE(&pll->current_en)) {
+ /* Enable the pll */
+ meson_parm_write(clk->map, &pll->en, 1);
+ udelay(10);
+ /* Enable the pll self-adaption module current */
+ meson_parm_write(clk->map, &pll->current_en, 1);
+ udelay(40);
+ meson_parm_write(clk->map, &pll->rst, 1);
+ meson_parm_write(clk->map, &pll->rst, 0);
+ }
+
/* do nothing if the PLL is already enabled */
if (clk_hw_is_enabled(hw))
return 0;
@@ -347,6 +364,10 @@ static void meson_clk_pll_disable(struct clk_hw *hw)
/* Disable the pll */
meson_parm_write(clk->map, &pll->en, 0);
+
+ /* Disable PLL internal self-adaption module current */
+ if (MESON_PARM_APPLICABLE(&pll->current_en))
+ meson_parm_write(clk->map, &pll->current_en, 0);
}
static int meson_clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
diff --git a/drivers/clk/meson/clk-pll.h b/drivers/clk/meson/clk-pll.h
index 367efd0f6410..30f039242a65 100644
--- a/drivers/clk/meson/clk-pll.h
+++ b/drivers/clk/meson/clk-pll.h
@@ -36,6 +36,7 @@ struct meson_clk_pll_data {
struct parm frac;
struct parm l;
struct parm rst;
+ struct parm current_en;
const struct reg_sequence *init_regs;
unsigned int init_count;
const struct pll_params_table *table;
diff --git a/drivers/clk/meson/parm.h b/drivers/clk/meson/parm.h
index 3c9ef1b505ce..c53fb26577e3 100644
--- a/drivers/clk/meson/parm.h
+++ b/drivers/clk/meson/parm.h
@@ -20,6 +20,7 @@
(((reg) & CLRPMASK(width, shift)) | ((val) << (shift)))
#define MESON_PARM_APPLICABLE(p) (!!((p)->width))
+#define MESON_PARM_CURRENT(p) (!!((p)->width))
struct parm {
u16 reg_off;
--
2.24.0
Powered by blists - more mailing lists