[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20191129190205.GA3282@kadam>
Date: Fri, 29 Nov 2019 22:02:06 +0300
From: Dan Carpenter <dan.carpenter@...cle.com>
To: Shubhrajyoti Datta <shubhrajyoti.datta@...il.com>
Cc: devel@...verdev.osuosl.org, Mark Rutland <mark.rutland@....com>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>, Stephen Boyd <sboyd@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Mike Turquette <mturquette@...libre.com>,
Shubhrajyoti Datta <shubhrajyoti.datta@...inx.com>,
linux-kernel <linux-kernel@...r.kernel.org>,
Rob Herring <robh+dt@...nel.org>, linux-clk@...r.kernel.org,
Sören Brinkmann <soren.brinkmann@...inx.com>
Subject: Re: [PATCH v3 08/10] clk: clock-wizard: Make the output names unique
On Fri, Nov 29, 2019 at 05:37:57PM +0530, Shubhrajyoti Datta wrote:
> On Thu, Nov 28, 2019 at 1:15 PM Dan Carpenter <dan.carpenter@...cle.com> wrote:
> >
> > On Thu, Nov 28, 2019 at 12:06:15PM +0530, shubhrajyoti.datta@...il.com wrote:
> > > From: Shubhrajyoti Datta <shubhrajyoti.datta@...inx.com>
> > >
> > > Incase there are more than one instance of the clocking wizard.
> > > And if the output name given is the same then the probe fails.
> > > Fix the same by appending the device name to the output name to
> > > make it unique.
> > >
> > > Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@...inx.com>
> > > ---
> > > drivers/clk/clk-xlnx-clock-wizard.c | 13 ++++++++-----
> > > 1 file changed, 8 insertions(+), 5 deletions(-)
> > >
> > > diff --git a/drivers/clk/clk-xlnx-clock-wizard.c b/drivers/clk/clk-xlnx-clock-wizard.c
> > > index 75ea745..9993543 100644
> > > --- a/drivers/clk/clk-xlnx-clock-wizard.c
> > > +++ b/drivers/clk/clk-xlnx-clock-wizard.c
> > > @@ -555,6 +555,9 @@ static int clk_wzrd_probe(struct platform_device *pdev)
> > > ret = -ENOMEM;
> > > goto err_disable_clk;
> > > }
> > > + outputs = of_property_count_strings(np, "clock-output-names");
> > > + if (outputs == 1)
> > > + flags = CLK_SET_RATE_PARENT;
> > > clk_wzrd->clks_internal[wzrd_clk_mul] = clk_register_fixed_factor
> > > (&pdev->dev, clk_name,
> > > __clk_get_name(clk_wzrd->clk_in1),
> > > @@ -566,9 +569,6 @@ static int clk_wzrd_probe(struct platform_device *pdev)
> > > goto err_disable_clk;
> > > }
> > >
> > > - outputs = of_property_count_strings(np, "clock-output-names");
> > > - if (outputs == 1)
> > > - flags = CLK_SET_RATE_PARENT;
> > > clk_name = kasprintf(GFP_KERNEL, "%s_mul_div", dev_name(&pdev->dev));
> > > if (!clk_name) {
> > > ret = -ENOMEM;
> > > @@ -591,6 +591,7 @@ static int clk_wzrd_probe(struct platform_device *pdev)
> > > /* register div per output */
> > > for (i = outputs - 1; i >= 0 ; i--) {
> > > const char *clkout_name;
> > > + const char *clkout_name_wiz;
> > >
> > > if (of_property_read_string_index(np, "clock-output-names", i,
> > > &clkout_name)) {
> > > @@ -599,9 +600,11 @@ static int clk_wzrd_probe(struct platform_device *pdev)
> > > ret = -EINVAL;
> > > goto err_rm_int_clks;
> > > }
> > > + clkout_name_wiz = kasprintf(GFP_KERNEL, "%s_%s",
> > > + dev_name(&pdev->dev), clkout_name);
> >
> > If this kasprintf() crashes then clk_wzrd_register_divf() will fail.
I meant if kasprintf() returns NULL not crashes... :/
> > But that was a headache to review. Just add a check for NULL. We need
> > a kfree() as well.
regards,
dan carpenter
Powered by blists - more mailing lists