| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20191201094256.GB3799322@kroah.com>
Date: Sun, 1 Dec 2019 10:42:56 +0100
From: Greg KH <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org,
Andrew Morton <akpm@...ux-foundation.org>,
torvalds@...ux-foundation.org, stable@...r.kernel.org
Cc: lwn@....net, Jiri Slaby <jslaby@...e.cz>
Subject: Re: Linux 5.4.1
diff --git a/Documentation/admin-guide/hw-vuln/mds.rst b/Documentation/admin-guide/hw-vuln/mds.rst
index e3a796c0d3a2..2d19c9f4c1fe 100644
--- a/Documentation/admin-guide/hw-vuln/mds.rst
+++ b/Documentation/admin-guide/hw-vuln/mds.rst
@@ -265,8 +265,11 @@ time with the option "mds=". The valid arguments for this option are:
============ =============================================================
-Not specifying this option is equivalent to "mds=full".
-
+Not specifying this option is equivalent to "mds=full". For processors
+that are affected by both TAA (TSX Asynchronous Abort) and MDS,
+specifying just "mds=off" without an accompanying "tsx_async_abort=off"
+will have no effect as the same mitigation is used for both
+vulnerabilities.
Mitigation selection guide
--------------------------
diff --git a/Documentation/admin-guide/hw-vuln/tsx_async_abort.rst b/Documentation/admin-guide/hw-vuln/tsx_async_abort.rst
index fddbd7579c53..af6865b822d2 100644
--- a/Documentation/admin-guide/hw-vuln/tsx_async_abort.rst
+++ b/Documentation/admin-guide/hw-vuln/tsx_async_abort.rst
@@ -174,7 +174,10 @@ the option "tsx_async_abort=". The valid arguments for this option are:
CPU is not vulnerable to cross-thread TAA attacks.
============ =============================================================
-Not specifying this option is equivalent to "tsx_async_abort=full".
+Not specifying this option is equivalent to "tsx_async_abort=full". For
+processors that are affected by both TAA and MDS, specifying just
+"tsx_async_abort=off" without an accompanying "mds=off" will have no
+effect as the same mitigation is used for both vulnerabilities.
The kernel command line also allows to control the TSX feature using the
parameter "tsx=" on CPUs which support TSX control. MSR_IA32_TSX_CTRL is used
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 8dee8f68fe15..9983ac73b66d 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -2473,6 +2473,12 @@
SMT on vulnerable CPUs
off - Unconditionally disable MDS mitigation
+ On TAA-affected machines, mds=off can be prevented by
+ an active TAA mitigation as both vulnerabilities are
+ mitigated with the same mechanism so in order to disable
+ this mitigation, you need to specify tsx_async_abort=off
+ too.
+
Not specifying this option is equivalent to
mds=full.
@@ -4931,6 +4937,11 @@
vulnerable to cross-thread TAA attacks.
off - Unconditionally disable TAA mitigation
+ On MDS-affected machines, tsx_async_abort=off can be
+ prevented by an active MDS mitigation as both vulnerabilities
+ are mitigated with the same mechanism so in order to disable
+ this mitigation, you need to specify mds=off too.
+
Not specifying this option is equivalent to
tsx_async_abort=full. On CPUs which are MDS affected
and deploy MDS mitigation, TAA mitigation is not
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
index ae661e65354e..f9499b20d840 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
@@ -81,6 +81,12 @@ Optional properties:
Definition: Name of external front end module used. Some valid FEM names
for example: "microsemi-lx5586", "sky85703-11"
and "sky85803" etc.
+- qcom,snoc-host-cap-8bit-quirk:
+ Usage: Optional
+ Value type: <empty>
+ Definition: Quirk specifying that the firmware expects the 8bit version
+ of the host capability QMI request
+
Example (to supply PCI based wifi block details):
diff --git a/Makefile b/Makefile
index d4d36c61940b..641a62423fd6 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
VERSION = 5
PATCHLEVEL = 4
-SUBLEVEL = 0
+SUBLEVEL = 1
EXTRAVERSION =
NAME = Kleptomaniac Octopus
diff --git a/arch/powerpc/include/asm/asm-prototypes.h b/arch/powerpc/include/asm/asm-prototypes.h
index 8561498e653c..d84d1417ddb6 100644
--- a/arch/powerpc/include/asm/asm-prototypes.h
+++ b/arch/powerpc/include/asm/asm-prototypes.h
@@ -152,9 +152,12 @@ void _kvmppc_save_tm_pr(struct kvm_vcpu *vcpu, u64 guest_msr);
/* Patch sites */
extern s32 patch__call_flush_count_cache;
extern s32 patch__flush_count_cache_return;
+extern s32 patch__flush_link_stack_return;
+extern s32 patch__call_kvm_flush_link_stack;
extern s32 patch__memset_nocache, patch__memcpy_nocache;
extern long flush_count_cache;
+extern long kvm_flush_link_stack;
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
void kvmppc_save_tm_hv(struct kvm_vcpu *vcpu, u64 msr, bool preserve_nv);
diff --git a/arch/powerpc/include/asm/security_features.h b/arch/powerpc/include/asm/security_features.h
index 759597bf0fd8..ccf44c135389 100644
--- a/arch/powerpc/include/asm/security_features.h
+++ b/arch/powerpc/include/asm/security_features.h
@@ -81,6 +81,9 @@ static inline bool security_ftr_enabled(unsigned long feature)
// Software required to flush count cache on context switch
#define SEC_FTR_FLUSH_COUNT_CACHE 0x0000000000000400ull
+// Software required to flush link stack on context switch
+#define SEC_FTR_FLUSH_LINK_STACK 0x0000000000001000ull
+
// Features enabled by default
#define SEC_FTR_DEFAULT \
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 6467bdab8d40..3fd3ef352e3f 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -537,6 +537,7 @@ flush_count_cache:
/* Save LR into r9 */
mflr r9
+ // Flush the link stack
.rept 64
bl .+4
.endr
@@ -546,6 +547,11 @@ flush_count_cache:
.balign 32
/* Restore LR */
1: mtlr r9
+
+ // If we're just flushing the link stack, return here
+3: nop
+ patch_site 3b patch__flush_link_stack_return
+
li r9,0x7fff
mtctr r9
diff --git a/arch/powerpc/kernel/security.c b/arch/powerpc/kernel/security.c
index 7cfcb294b11c..bd91dceb7010 100644
--- a/arch/powerpc/kernel/security.c
+++ b/arch/powerpc/kernel/security.c
@@ -24,6 +24,7 @@ enum count_cache_flush_type {
COUNT_CACHE_FLUSH_HW = 0x4,
};
static enum count_cache_flush_type count_cache_flush_type = COUNT_CACHE_FLUSH_NONE;
+static bool link_stack_flush_enabled;
bool barrier_nospec_enabled;
static bool no_nospec;
@@ -212,11 +213,19 @@ ssize_t cpu_show_spectre_v2(struct device *dev, struct device_attribute *attr, c
if (ccd)
seq_buf_printf(&s, "Indirect branch cache disabled");
+
+ if (link_stack_flush_enabled)
+ seq_buf_printf(&s, ", Software link stack flush");
+
} else if (count_cache_flush_type != COUNT_CACHE_FLUSH_NONE) {
seq_buf_printf(&s, "Mitigation: Software count cache flush");
if (count_cache_flush_type == COUNT_CACHE_FLUSH_HW)
seq_buf_printf(&s, " (hardware accelerated)");
+
+ if (link_stack_flush_enabled)
+ seq_buf_printf(&s, ", Software link stack flush");
+
} else if (btb_flush_enabled) {
seq_buf_printf(&s, "Mitigation: Branch predictor state flush");
} else {
@@ -377,18 +386,49 @@ static __init int stf_barrier_debugfs_init(void)
device_initcall(stf_barrier_debugfs_init);
#endif /* CONFIG_DEBUG_FS */
+static void no_count_cache_flush(void)
+{
+ count_cache_flush_type = COUNT_CACHE_FLUSH_NONE;
+ pr_info("count-cache-flush: software flush disabled.\n");
+}
+
static void toggle_count_cache_flush(bool enable)
{
- if (!enable || !security_ftr_enabled(SEC_FTR_FLUSH_COUNT_CACHE)) {
+ if (!security_ftr_enabled(SEC_FTR_FLUSH_COUNT_CACHE) &&
+ !security_ftr_enabled(SEC_FTR_FLUSH_LINK_STACK))
+ enable = false;
+
+ if (!enable) {
patch_instruction_site(&patch__call_flush_count_cache, PPC_INST_NOP);
- count_cache_flush_type = COUNT_CACHE_FLUSH_NONE;
- pr_info("count-cache-flush: software flush disabled.\n");
+#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+ patch_instruction_site(&patch__call_kvm_flush_link_stack, PPC_INST_NOP);
+#endif
+ pr_info("link-stack-flush: software flush disabled.\n");
+ link_stack_flush_enabled = false;
+ no_count_cache_flush();
return;
}
+ // This enables the branch from _switch to flush_count_cache
patch_branch_site(&patch__call_flush_count_cache,
(u64)&flush_count_cache, BRANCH_SET_LINK);
+#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+ // This enables the branch from guest_exit_cont to kvm_flush_link_stack
+ patch_branch_site(&patch__call_kvm_flush_link_stack,
+ (u64)&kvm_flush_link_stack, BRANCH_SET_LINK);
+#endif
+
+ pr_info("link-stack-flush: software flush enabled.\n");
+ link_stack_flush_enabled = true;
+
+ // If we just need to flush the link stack, patch an early return
+ if (!security_ftr_enabled(SEC_FTR_FLUSH_COUNT_CACHE)) {
+ patch_instruction_site(&patch__flush_link_stack_return, PPC_INST_BLR);
+ no_count_cache_flush();
+ return;
+ }
+
if (!security_ftr_enabled(SEC_FTR_BCCTR_FLUSH_ASSIST)) {
count_cache_flush_type = COUNT_CACHE_FLUSH_SW;
pr_info("count-cache-flush: full software flush sequence enabled.\n");
@@ -407,11 +447,20 @@ void setup_count_cache_flush(void)
if (no_spectrev2 || cpu_mitigations_off()) {
if (security_ftr_enabled(SEC_FTR_BCCTRL_SERIALISED) ||
security_ftr_enabled(SEC_FTR_COUNT_CACHE_DISABLED))
- pr_warn("Spectre v2 mitigations not under software control, can't disable\n");
+ pr_warn("Spectre v2 mitigations not fully under software control, can't disable\n");
enable = false;
}
+ /*
+ * There's no firmware feature flag/hypervisor bit to tell us we need to
+ * flush the link stack on context switch. So we set it here if we see
+ * either of the Spectre v2 mitigations that aim to protect userspace.
+ */
+ if (security_ftr_enabled(SEC_FTR_COUNT_CACHE_DISABLED) ||
+ security_ftr_enabled(SEC_FTR_FLUSH_COUNT_CACHE))
+ security_ftr_set(SEC_FTR_FLUSH_LINK_STACK);
+
toggle_count_cache_flush(enable);
}
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index faebcbb8c4db..0496e66aaa56 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -11,6 +11,7 @@
*/
#include <asm/ppc_asm.h>
+#include <asm/code-patching-asm.h>
#include <asm/kvm_asm.h>
#include <asm/reg.h>
#include <asm/mmu.h>
@@ -1487,6 +1488,13 @@ guest_exit_cont: /* r9 = vcpu, r12 = trap, r13 = paca */
1:
#endif /* CONFIG_KVM_XICS */
+ /*
+ * Possibly flush the link stack here, before we do a blr in
+ * guest_exit_short_path.
+ */
+1: nop
+ patch_site 1b patch__call_kvm_flush_link_stack
+
/* If we came in through the P9 short path, go back out to C now */
lwz r0, STACK_SLOT_SHORT_PATH(r1)
cmpwi r0, 0
@@ -1963,6 +1971,28 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
mtlr r0
blr
+.balign 32
+.global kvm_flush_link_stack
+kvm_flush_link_stack:
+ /* Save LR into r0 */
+ mflr r0
+
+ /* Flush the link stack. On Power8 it's up to 32 entries in size. */
+ .rept 32
+ bl .+4
+ .endr
+
+ /* And on Power9 it's up to 64. */
+BEGIN_FTR_SECTION
+ .rept 32
+ bl .+4
+ .endr
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
+
+ /* Restore LR */
+ mtlr r0
+ blr
+
kvmppc_guest_external:
/* External interrupt, first check for host_ipi. If this is
* set, we know the host wants us out so let's do it now
diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index f83ca5aa8b77..f07baf0388bc 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -172,7 +172,7 @@
ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI
.if \no_user_check == 0
/* coming from usermode? */
- testl $SEGMENT_RPL_MASK, PT_CS(%esp)
+ testl $USER_SEGMENT_RPL_MASK, PT_CS(%esp)
jz .Lend_\@
.endif
/* On user-cr3? */
@@ -205,64 +205,76 @@
#define CS_FROM_ENTRY_STACK (1 << 31)
#define CS_FROM_USER_CR3 (1 << 30)
#define CS_FROM_KERNEL (1 << 29)
+#define CS_FROM_ESPFIX (1 << 28)
.macro FIXUP_FRAME
/*
* The high bits of the CS dword (__csh) are used for CS_FROM_*.
* Clear them in case hardware didn't do this for us.
*/
- andl $0x0000ffff, 3*4(%esp)
+ andl $0x0000ffff, 4*4(%esp)
#ifdef CONFIG_VM86
- testl $X86_EFLAGS_VM, 4*4(%esp)
+ testl $X86_EFLAGS_VM, 5*4(%esp)
jnz .Lfrom_usermode_no_fixup_\@
#endif
- testl $SEGMENT_RPL_MASK, 3*4(%esp)
+ testl $USER_SEGMENT_RPL_MASK, 4*4(%esp)
jnz .Lfrom_usermode_no_fixup_\@
- orl $CS_FROM_KERNEL, 3*4(%esp)
+ orl $CS_FROM_KERNEL, 4*4(%esp)
/*
* When we're here from kernel mode; the (exception) stack looks like:
*
- * 5*4(%esp) - <previous context>
- * 4*4(%esp) - flags
- * 3*4(%esp) - cs
- * 2*4(%esp) - ip
- * 1*4(%esp) - orig_eax
- * 0*4(%esp) - gs / function
+ * 6*4(%esp) - <previous context>
+ * 5*4(%esp) - flags
+ * 4*4(%esp) - cs
+ * 3*4(%esp) - ip
+ * 2*4(%esp) - orig_eax
+ * 1*4(%esp) - gs / function
+ * 0*4(%esp) - fs
*
* Lets build a 5 entry IRET frame after that, such that struct pt_regs
* is complete and in particular regs->sp is correct. This gives us
- * the original 5 enties as gap:
+ * the original 6 enties as gap:
*
- * 12*4(%esp) - <previous context>
- * 11*4(%esp) - gap / flags
- * 10*4(%esp) - gap / cs
- * 9*4(%esp) - gap / ip
- * 8*4(%esp) - gap / orig_eax
- * 7*4(%esp) - gap / gs / function
- * 6*4(%esp) - ss
- * 5*4(%esp) - sp
- * 4*4(%esp) - flags
- * 3*4(%esp) - cs
- * 2*4(%esp) - ip
- * 1*4(%esp) - orig_eax
- * 0*4(%esp) - gs / function
+ * 14*4(%esp) - <previous context>
+ * 13*4(%esp) - gap / flags
+ * 12*4(%esp) - gap / cs
+ * 11*4(%esp) - gap / ip
+ * 10*4(%esp) - gap / orig_eax
+ * 9*4(%esp) - gap / gs / function
+ * 8*4(%esp) - gap / fs
+ * 7*4(%esp) - ss
+ * 6*4(%esp) - sp
+ * 5*4(%esp) - flags
+ * 4*4(%esp) - cs
+ * 3*4(%esp) - ip
+ * 2*4(%esp) - orig_eax
+ * 1*4(%esp) - gs / function
+ * 0*4(%esp) - fs
*/
pushl %ss # ss
pushl %esp # sp (points at ss)
- addl $6*4, (%esp) # point sp back at the previous context
- pushl 6*4(%esp) # flags
- pushl 6*4(%esp) # cs
- pushl 6*4(%esp) # ip
- pushl 6*4(%esp) # orig_eax
- pushl 6*4(%esp) # gs / function
+ addl $7*4, (%esp) # point sp back at the previous context
+ pushl 7*4(%esp) # flags
+ pushl 7*4(%esp) # cs
+ pushl 7*4(%esp) # ip
+ pushl 7*4(%esp) # orig_eax
+ pushl 7*4(%esp) # gs / function
+ pushl 7*4(%esp) # fs
.Lfrom_usermode_no_fixup_\@:
.endm
.macro IRET_FRAME
+ /*
+ * We're called with %ds, %es, %fs, and %gs from the interrupted
+ * frame, so we shouldn't use them. Also, we may be in ESPFIX
+ * mode and therefore have a nonzero SS base and an offset ESP,
+ * so any attempt to access the stack needs to use SS. (except for
+ * accesses through %esp, which automatically use SS.)
+ */
testl $CS_FROM_KERNEL, 1*4(%esp)
jz .Lfinished_frame_\@
@@ -276,31 +288,40 @@
movl 5*4(%esp), %eax # (modified) regs->sp
movl 4*4(%esp), %ecx # flags
- movl %ecx, -4(%eax)
+ movl %ecx, %ss:-1*4(%eax)
movl 3*4(%esp), %ecx # cs
andl $0x0000ffff, %ecx
- movl %ecx, -8(%eax)
+ movl %ecx, %ss:-2*4(%eax)
movl 2*4(%esp), %ecx # ip
- movl %ecx, -12(%eax)
+ movl %ecx, %ss:-3*4(%eax)
movl 1*4(%esp), %ecx # eax
- movl %ecx, -16(%eax)
+ movl %ecx, %ss:-4*4(%eax)
popl %ecx
- lea -16(%eax), %esp
+ lea -4*4(%eax), %esp
popl %eax
.Lfinished_frame_\@:
.endm
-.macro SAVE_ALL pt_regs_ax=%eax switch_stacks=0 skip_gs=0
+.macro SAVE_ALL pt_regs_ax=%eax switch_stacks=0 skip_gs=0 unwind_espfix=0
cld
.if \skip_gs == 0
PUSH_GS
.endif
- FIXUP_FRAME
pushl %fs
+
+ pushl %eax
+ movl $(__KERNEL_PERCPU), %eax
+ movl %eax, %fs
+.if \unwind_espfix > 0
+ UNWIND_ESPFIX_STACK
+.endif
+ popl %eax
+
+ FIXUP_FRAME
pushl %es
pushl %ds
pushl \pt_regs_ax
@@ -313,8 +334,6 @@
movl $(__USER_DS), %edx
movl %edx, %ds
movl %edx, %es
- movl $(__KERNEL_PERCPU), %edx
- movl %edx, %fs
.if \skip_gs == 0
SET_KERNEL_GS %edx
.endif
@@ -324,8 +343,8 @@
.endif
.endm
-.macro SAVE_ALL_NMI cr3_reg:req
- SAVE_ALL
+.macro SAVE_ALL_NMI cr3_reg:req unwind_espfix=0
+ SAVE_ALL unwind_espfix=\unwind_espfix
BUG_IF_WRONG_CR3
@@ -357,6 +376,7 @@
2: popl %es
3: popl %fs
POP_GS \pop
+ IRET_FRAME
.pushsection .fixup, "ax"
4: movl $0, (%esp)
jmp 1b
@@ -395,7 +415,8 @@
.macro CHECK_AND_APPLY_ESPFIX
#ifdef CONFIG_X86_ESPFIX32
-#define GDT_ESPFIX_SS PER_CPU_VAR(gdt_page) + (GDT_ENTRY_ESPFIX_SS * 8)
+#define GDT_ESPFIX_OFFSET (GDT_ENTRY_ESPFIX_SS * 8)
+#define GDT_ESPFIX_SS PER_CPU_VAR(gdt_page) + GDT_ESPFIX_OFFSET
ALTERNATIVE "jmp .Lend_\@", "", X86_BUG_ESPFIX
@@ -1075,7 +1096,6 @@ restore_all:
/* Restore user state */
RESTORE_REGS pop=4 # skip orig_eax/error_code
.Lirq_return:
- IRET_FRAME
/*
* ARCH_HAS_MEMBARRIER_SYNC_CORE rely on IRET core serialization
* when returning from IPI handler and when returning from
@@ -1128,30 +1148,43 @@ ENDPROC(entry_INT80_32)
* We can't call C functions using the ESPFIX stack. This code reads
* the high word of the segment base from the GDT and swiches to the
* normal stack and adjusts ESP with the matching offset.
+ *
+ * We might be on user CR3 here, so percpu data is not mapped and we can't
+ * access the GDT through the percpu segment. Instead, use SGDT to find
+ * the cpu_entry_area alias of the GDT.
*/
#ifdef CONFIG_X86_ESPFIX32
/* fixup the stack */
- mov GDT_ESPFIX_SS + 4, %al /* bits 16..23 */
- mov GDT_ESPFIX_SS + 7, %ah /* bits 24..31 */
+ pushl %ecx
+ subl $2*4, %esp
+ sgdt (%esp)
+ movl 2(%esp), %ecx /* GDT address */
+ /*
+ * Careful: ECX is a linear pointer, so we need to force base
+ * zero. %cs is the only known-linear segment we have right now.
+ */
+ mov %cs:GDT_ESPFIX_OFFSET + 4(%ecx), %al /* bits 16..23 */
+ mov %cs:GDT_ESPFIX_OFFSET + 7(%ecx), %ah /* bits 24..31 */
shl $16, %eax
+ addl $2*4, %esp
+ popl %ecx
addl %esp, %eax /* the adjusted stack pointer */
pushl $__KERNEL_DS
pushl %eax
lss (%esp), %esp /* switch to the normal stack segment */
#endif
.endm
+
.macro UNWIND_ESPFIX_STACK
+ /* It's safe to clobber %eax, all other regs need to be preserved */
#ifdef CONFIG_X86_ESPFIX32
movl %ss, %eax
/* see if on espfix stack */
cmpw $__ESPFIX_SS, %ax
- jne 27f
- movl $__KERNEL_DS, %eax
- movl %eax, %ds
- movl %eax, %es
+ jne .Lno_fixup_\@
/* switch to normal stack */
FIXUP_ESPFIX_STACK
-27:
+.Lno_fixup_\@:
#endif
.endm
@@ -1341,11 +1374,6 @@ END(spurious_interrupt_bug)
#ifdef CONFIG_XEN_PV
ENTRY(xen_hypervisor_callback)
- pushl $-1 /* orig_ax = -1 => not a system call */
- SAVE_ALL
- ENCODE_FRAME_POINTER
- TRACE_IRQS_OFF
-
/*
* Check to see if we got the event in the critical
* region in xen_iret_direct, after we've reenabled
@@ -1353,16 +1381,17 @@ ENTRY(xen_hypervisor_callback)
* iret instruction's behaviour where it delivers a
* pending interrupt when enabling interrupts:
*/
- movl PT_EIP(%esp), %eax
- cmpl $xen_iret_start_crit, %eax
+ cmpl $xen_iret_start_crit, (%esp)
jb 1f
- cmpl $xen_iret_end_crit, %eax
+ cmpl $xen_iret_end_crit, (%esp)
jae 1f
-
- jmp xen_iret_crit_fixup
-
-ENTRY(xen_do_upcall)
-1: mov %esp, %eax
+ call xen_iret_crit_fixup
+1:
+ pushl $-1 /* orig_ax = -1 => not a system call */
+ SAVE_ALL
+ ENCODE_FRAME_POINTER
+ TRACE_IRQS_OFF
+ mov %esp, %eax
call xen_evtchn_do_upcall
#ifndef CONFIG_PREEMPTION
call xen_maybe_preempt_hcall
@@ -1449,10 +1478,9 @@ END(page_fault)
common_exception_read_cr2:
/* the function address is in %gs's slot on the stack */
- SAVE_ALL switch_stacks=1 skip_gs=1
+ SAVE_ALL switch_stacks=1 skip_gs=1 unwind_espfix=1
ENCODE_FRAME_POINTER
- UNWIND_ESPFIX_STACK
/* fixup %gs */
GS_TO_REG %ecx
@@ -1474,9 +1502,8 @@ END(common_exception_read_cr2)
common_exception:
/* the function address is in %gs's slot on the stack */
- SAVE_ALL switch_stacks=1 skip_gs=1
+ SAVE_ALL switch_stacks=1 skip_gs=1 unwind_espfix=1
ENCODE_FRAME_POINTER
- UNWIND_ESPFIX_STACK
/* fixup %gs */
GS_TO_REG %ecx
@@ -1515,6 +1542,10 @@ ENTRY(nmi)
ASM_CLAC
#ifdef CONFIG_X86_ESPFIX32
+ /*
+ * ESPFIX_SS is only ever set on the return to user path
+ * after we've switched to the entry stack.
+ */
pushl %eax
movl %ss, %eax
cmpw $__ESPFIX_SS, %ax
@@ -1550,6 +1581,11 @@ ENTRY(nmi)
movl %ebx, %esp
.Lnmi_return:
+#ifdef CONFIG_X86_ESPFIX32
+ testl $CS_FROM_ESPFIX, PT_CS(%esp)
+ jnz .Lnmi_from_espfix
+#endif
+
CHECK_AND_APPLY_ESPFIX
RESTORE_ALL_NMI cr3_reg=%edi pop=4
jmp .Lirq_return
@@ -1557,23 +1593,42 @@ ENTRY(nmi)
#ifdef CONFIG_X86_ESPFIX32
.Lnmi_espfix_stack:
/*
- * create the pointer to lss back
+ * Create the pointer to LSS back
*/
pushl %ss
pushl %esp
addl $4, (%esp)
- /* copy the iret frame of 12 bytes */
- .rept 3
- pushl 16(%esp)
- .endr
- pushl %eax
- SAVE_ALL_NMI cr3_reg=%edi
+
+ /* Copy the (short) IRET frame */
+ pushl 4*4(%esp) # flags
+ pushl 4*4(%esp) # cs
+ pushl 4*4(%esp) # ip
+
+ pushl %eax # orig_ax
+
+ SAVE_ALL_NMI cr3_reg=%edi unwind_espfix=1
ENCODE_FRAME_POINTER
- FIXUP_ESPFIX_STACK # %eax == %esp
+
+ /* clear CS_FROM_KERNEL, set CS_FROM_ESPFIX */
+ xorl $(CS_FROM_ESPFIX | CS_FROM_KERNEL), PT_CS(%esp)
+
xorl %edx, %edx # zero error code
- call do_nmi
+ movl %esp, %eax # pt_regs pointer
+ jmp .Lnmi_from_sysenter_stack
+
+.Lnmi_from_espfix:
RESTORE_ALL_NMI cr3_reg=%edi
- lss 12+4(%esp), %esp # back to espfix stack
+ /*
+ * Because we cleared CS_FROM_KERNEL, IRET_FRAME 'forgot' to
+ * fix up the gap and long frame:
+ *
+ * 3 - original frame (exception)
+ * 2 - ESPFIX block (above)
+ * 6 - gap (FIXUP_FRAME)
+ * 5 - long frame (FIXUP_FRAME)
+ * 1 - orig_ax
+ */
+ lss (1+5+6)*4(%esp), %esp # back to espfix stack
jmp .Lirq_return
#endif
END(nmi)
diff --git a/arch/x86/include/asm/cpu_entry_area.h b/arch/x86/include/asm/cpu_entry_area.h
index 8348f7d69fd5..ea866c7bf31d 100644
--- a/arch/x86/include/asm/cpu_entry_area.h
+++ b/arch/x86/include/asm/cpu_entry_area.h
@@ -78,8 +78,12 @@ struct cpu_entry_area {
/*
* The GDT is just below entry_stack and thus serves (on x86_64) as
- * a a read-only guard page.
+ * a read-only guard page. On 32-bit the GDT must be writeable, so
+ * it needs an extra guard page.
*/
+#ifdef CONFIG_X86_32
+ char guard_entry_stack[PAGE_SIZE];
+#endif
struct entry_stack_page entry_stack_page;
/*
@@ -94,7 +98,6 @@ struct cpu_entry_area {
*/
struct cea_exception_stacks estacks;
#endif
-#ifdef CONFIG_CPU_SUP_INTEL
/*
* Per CPU debug store for Intel performance monitoring. Wastes a
* full page at the moment.
@@ -105,11 +108,13 @@ struct cpu_entry_area {
* Reserve enough fixmap PTEs.
*/
struct debug_store_buffers cpu_debug_buffers;
-#endif
};
-#define CPU_ENTRY_AREA_SIZE (sizeof(struct cpu_entry_area))
-#define CPU_ENTRY_AREA_TOT_SIZE (CPU_ENTRY_AREA_SIZE * NR_CPUS)
+#define CPU_ENTRY_AREA_SIZE (sizeof(struct cpu_entry_area))
+#define CPU_ENTRY_AREA_ARRAY_SIZE (CPU_ENTRY_AREA_SIZE * NR_CPUS)
+
+/* Total size includes the readonly IDT mapping page as well: */
+#define CPU_ENTRY_AREA_TOTAL_SIZE (CPU_ENTRY_AREA_ARRAY_SIZE + PAGE_SIZE)
DECLARE_PER_CPU(struct cpu_entry_area *, cpu_entry_area);
DECLARE_PER_CPU(struct cea_exception_stacks *, cea_exception_stacks);
@@ -117,13 +122,14 @@ DECLARE_PER_CPU(struct cea_exception_stacks *, cea_exception_stacks);
extern void setup_cpu_entry_areas(void);
extern void cea_set_pte(void *cea_vaddr, phys_addr_t pa, pgprot_t flags);
+/* Single page reserved for the readonly IDT mapping: */
#define CPU_ENTRY_AREA_RO_IDT CPU_ENTRY_AREA_BASE
#define CPU_ENTRY_AREA_PER_CPU (CPU_ENTRY_AREA_RO_IDT + PAGE_SIZE)
#define CPU_ENTRY_AREA_RO_IDT_VADDR ((void *)CPU_ENTRY_AREA_RO_IDT)
#define CPU_ENTRY_AREA_MAP_SIZE \
- (CPU_ENTRY_AREA_PER_CPU + CPU_ENTRY_AREA_TOT_SIZE - CPU_ENTRY_AREA_BASE)
+ (CPU_ENTRY_AREA_PER_CPU + CPU_ENTRY_AREA_ARRAY_SIZE - CPU_ENTRY_AREA_BASE)
extern struct cpu_entry_area *get_cpu_entry_area(int cpu);
diff --git a/arch/x86/include/asm/pgtable_32_types.h b/arch/x86/include/asm/pgtable_32_types.h
index b0bc0fff5f1f..1636eb8e5a5b 100644
--- a/arch/x86/include/asm/pgtable_32_types.h
+++ b/arch/x86/include/asm/pgtable_32_types.h
@@ -44,11 +44,11 @@ extern bool __vmalloc_start_set; /* set once high_memory is set */
* Define this here and validate with BUILD_BUG_ON() in pgtable_32.c
* to avoid include recursion hell
*/
-#define CPU_ENTRY_AREA_PAGES (NR_CPUS * 40)
+#define CPU_ENTRY_AREA_PAGES (NR_CPUS * 39)
-#define CPU_ENTRY_AREA_BASE \
- ((FIXADDR_TOT_START - PAGE_SIZE * (CPU_ENTRY_AREA_PAGES + 1)) \
- & PMD_MASK)
+/* The +1 is for the readonly IDT page: */
+#define CPU_ENTRY_AREA_BASE \
+ ((FIXADDR_TOT_START - PAGE_SIZE*(CPU_ENTRY_AREA_PAGES+1)) & PMD_MASK)
#define LDT_BASE_ADDR \
((CPU_ENTRY_AREA_BASE - PAGE_SIZE) & PMD_MASK)
diff --git a/arch/x86/include/asm/segment.h b/arch/x86/include/asm/segment.h
index ac3892920419..6669164abadc 100644
--- a/arch/x86/include/asm/segment.h
+++ b/arch/x86/include/asm/segment.h
@@ -31,6 +31,18 @@
*/
#define SEGMENT_RPL_MASK 0x3
+/*
+ * When running on Xen PV, the actual privilege level of the kernel is 1,
+ * not 0. Testing the Requested Privilege Level in a segment selector to
+ * determine whether the context is user mode or kernel mode with
+ * SEGMENT_RPL_MASK is wrong because the PV kernel's privilege level
+ * matches the 0x3 mask.
+ *
+ * Testing with USER_SEGMENT_RPL_MASK is valid for both native and Xen PV
+ * kernels because privilege level 2 is never used.
+ */
+#define USER_SEGMENT_RPL_MASK 0x2
+
/* User mode is privilege level 3: */
#define USER_RPL 0x3
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index 4c7b0fa15a19..8bf64899f56a 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -39,6 +39,7 @@ static void __init spectre_v2_select_mitigation(void);
static void __init ssb_select_mitigation(void);
static void __init l1tf_select_mitigation(void);
static void __init mds_select_mitigation(void);
+static void __init mds_print_mitigation(void);
static void __init taa_select_mitigation(void);
/* The base value of the SPEC_CTRL MSR that always has to be preserved. */
@@ -108,6 +109,12 @@ void __init check_bugs(void)
mds_select_mitigation();
taa_select_mitigation();
+ /*
+ * As MDS and TAA mitigations are inter-related, print MDS
+ * mitigation until after TAA mitigation selection is done.
+ */
+ mds_print_mitigation();
+
arch_smt_update();
#ifdef CONFIG_X86_32
@@ -245,6 +252,12 @@ static void __init mds_select_mitigation(void)
(mds_nosmt || cpu_mitigations_auto_nosmt()))
cpu_smt_disable(false);
}
+}
+
+static void __init mds_print_mitigation(void)
+{
+ if (!boot_cpu_has_bug(X86_BUG_MDS) || cpu_mitigations_off())
+ return;
pr_info("%s\n", mds_strings[mds_mitigation]);
}
@@ -304,8 +317,12 @@ static void __init taa_select_mitigation(void)
return;
}
- /* TAA mitigation is turned off on the cmdline (tsx_async_abort=off) */
- if (taa_mitigation == TAA_MITIGATION_OFF)
+ /*
+ * TAA mitigation via VERW is turned off if both
+ * tsx_async_abort=off and mds=off are specified.
+ */
+ if (taa_mitigation == TAA_MITIGATION_OFF &&
+ mds_mitigation == MDS_MITIGATION_OFF)
goto out;
if (boot_cpu_has(X86_FEATURE_MD_CLEAR))
@@ -339,6 +356,15 @@ static void __init taa_select_mitigation(void)
if (taa_nosmt || cpu_mitigations_auto_nosmt())
cpu_smt_disable(false);
+ /*
+ * Update MDS mitigation, if necessary, as the mds_user_clear is
+ * now enabled for TAA mitigation.
+ */
+ if (mds_mitigation == MDS_MITIGATION_OFF &&
+ boot_cpu_has_bug(X86_BUG_MDS)) {
+ mds_mitigation = MDS_MITIGATION_FULL;
+ mds_select_mitigation();
+ }
out:
pr_info("%s\n", taa_strings[taa_mitigation]);
}
diff --git a/arch/x86/kernel/doublefault.c b/arch/x86/kernel/doublefault.c
index 0b8cedb20d6d..d5c9b13bafdf 100644
--- a/arch/x86/kernel/doublefault.c
+++ b/arch/x86/kernel/doublefault.c
@@ -65,6 +65,9 @@ struct x86_hw_tss doublefault_tss __cacheline_aligned = {
.ss = __KERNEL_DS,
.ds = __USER_DS,
.fs = __KERNEL_PERCPU,
+#ifndef CONFIG_X86_32_LAZY_GS
+ .gs = __KERNEL_STACK_CANARY,
+#endif
.__cr3 = __pa_nodebug(swapper_pg_dir),
};
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 30f9cb2c0b55..2e6a0676c1f4 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -571,6 +571,16 @@ ENTRY(initial_page_table)
# error "Kernel PMDs should be 1, 2 or 3"
# endif
.align PAGE_SIZE /* needs to be page-sized too */
+
+#ifdef CONFIG_PAGE_TABLE_ISOLATION
+ /*
+ * PTI needs another page so sync_initial_pagetable() works correctly
+ * and does not scribble over the data which is placed behind the
+ * actual initial_page_table. See clone_pgd_range().
+ */
+ .fill 1024, 4, 0
+#endif
+
#endif
.data
diff --git a/arch/x86/mm/cpu_entry_area.c b/arch/x86/mm/cpu_entry_area.c
index 752ad11d6868..d9643647a9ce 100644
--- a/arch/x86/mm/cpu_entry_area.c
+++ b/arch/x86/mm/cpu_entry_area.c
@@ -178,7 +178,9 @@ static __init void setup_cpu_entry_area_ptes(void)
#ifdef CONFIG_X86_32
unsigned long start, end;
- BUILD_BUG_ON(CPU_ENTRY_AREA_PAGES * PAGE_SIZE < CPU_ENTRY_AREA_MAP_SIZE);
+ /* The +1 is for the readonly IDT: */
+ BUILD_BUG_ON((CPU_ENTRY_AREA_PAGES+1)*PAGE_SIZE != CPU_ENTRY_AREA_MAP_SIZE);
+ BUILD_BUG_ON(CPU_ENTRY_AREA_TOTAL_SIZE != CPU_ENTRY_AREA_MAP_SIZE);
BUG_ON(CPU_ENTRY_AREA_BASE & ~PMD_MASK);
start = CPU_ENTRY_AREA_BASE;
diff --git a/arch/x86/tools/gen-insn-attr-x86.awk b/arch/x86/tools/gen-insn-attr-x86.awk
index b02a36b2c14f..a42015b305f4 100644
--- a/arch/x86/tools/gen-insn-attr-x86.awk
+++ b/arch/x86/tools/gen-insn-attr-x86.awk
@@ -69,7 +69,7 @@ BEGIN {
lprefix1_expr = "\\((66|!F3)\\)"
lprefix2_expr = "\\(F3\\)"
- lprefix3_expr = "\\((F2|!F3|66\\&F2)\\)"
+ lprefix3_expr = "\\((F2|!F3|66&F2)\\)"
lprefix_expr = "\\((66|F2|F3)\\)"
max_lprefix = 4
@@ -257,7 +257,7 @@ function convert_operands(count,opnd, i,j,imm,mod)
return add_flags(imm, mod)
}
-/^[0-9a-f]+\:/ {
+/^[0-9a-f]+:/ {
if (NR == 1)
next
# get index
diff --git a/arch/x86/xen/xen-asm_32.S b/arch/x86/xen/xen-asm_32.S
index c15db060a242..cd177772fe4d 100644
--- a/arch/x86/xen/xen-asm_32.S
+++ b/arch/x86/xen/xen-asm_32.S
@@ -126,10 +126,9 @@ hyper_iret:
.globl xen_iret_start_crit, xen_iret_end_crit
/*
- * This is called by xen_hypervisor_callback in entry.S when it sees
+ * This is called by xen_hypervisor_callback in entry_32.S when it sees
* that the EIP at the time of interrupt was between
- * xen_iret_start_crit and xen_iret_end_crit. We're passed the EIP in
- * %eax so we can do a more refined determination of what to do.
+ * xen_iret_start_crit and xen_iret_end_crit.
*
* The stack format at this point is:
* ----------------
@@ -138,70 +137,46 @@ hyper_iret:
* eflags } outer exception info
* cs }
* eip }
- * ---------------- <- edi (copy dest)
- * eax : outer eax if it hasn't been restored
* ----------------
- * eflags } nested exception info
- * cs } (no ss/esp because we're nested
- * eip } from the same ring)
- * orig_eax }<- esi (copy src)
- * - - - - - - - -
- * fs }
- * es }
- * ds } SAVE_ALL state
- * eax }
- * : :
- * ebx }<- esp
+ * eax : outer eax if it hasn't been restored
* ----------------
+ * eflags }
+ * cs } nested exception info
+ * eip }
+ * return address : (into xen_hypervisor_callback)
*
- * In order to deliver the nested exception properly, we need to shift
- * everything from the return addr up to the error code so it sits
- * just under the outer exception info. This means that when we
- * handle the exception, we do it in the context of the outer
- * exception rather than starting a new one.
+ * In order to deliver the nested exception properly, we need to discard the
+ * nested exception frame such that when we handle the exception, we do it
+ * in the context of the outer exception rather than starting a new one.
*
- * The only caveat is that if the outer eax hasn't been restored yet
- * (ie, it's still on stack), we need to insert its value into the
- * SAVE_ALL state before going on, since it's usermode state which we
- * eventually need to restore.
+ * The only caveat is that if the outer eax hasn't been restored yet (i.e.
+ * it's still on stack), we need to restore its value here.
*/
ENTRY(xen_iret_crit_fixup)
/*
* Paranoia: Make sure we're really coming from kernel space.
* One could imagine a case where userspace jumps into the
* critical range address, but just before the CPU delivers a
- * GP, it decides to deliver an interrupt instead. Unlikely?
- * Definitely. Easy to avoid? Yes. The Intel documents
- * explicitly say that the reported EIP for a bad jump is the
- * jump instruction itself, not the destination, but some
- * virtual environments get this wrong.
+ * PF, it decides to deliver an interrupt instead. Unlikely?
+ * Definitely. Easy to avoid? Yes.
*/
- movl PT_CS(%esp), %ecx
- andl $SEGMENT_RPL_MASK, %ecx
- cmpl $USER_RPL, %ecx
- je 2f
-
- lea PT_ORIG_EAX(%esp), %esi
- lea PT_EFLAGS(%esp), %edi
+ testb $2, 2*4(%esp) /* nested CS */
+ jnz 2f
/*
* If eip is before iret_restore_end then stack
* hasn't been restored yet.
*/
- cmp $iret_restore_end, %eax
+ cmpl $iret_restore_end, 1*4(%esp)
jae 1f
- movl 0+4(%edi), %eax /* copy EAX (just above top of frame) */
- movl %eax, PT_EAX(%esp)
+ movl 4*4(%esp), %eax /* load outer EAX */
+ ret $4*4 /* discard nested EIP, CS, and EFLAGS as
+ * well as the just restored EAX */
- lea ESP_OFFSET(%edi), %edi /* move dest up over saved regs */
-
- /* set up the copy */
-1: std
- mov $PT_EIP / 4, %ecx /* saved regs up to orig_eax */
- rep movsl
- cld
-
- lea 4(%edi), %esp /* point esp to new frame */
-2: jmp xen_do_upcall
+1:
+ ret $3*4 /* discard nested EIP, CS, and EFLAGS */
+2:
+ ret
+END(xen_iret_crit_fixup)
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 19e75999bb15..57532465fb83 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -1032,14 +1032,15 @@ static int nbd_add_socket(struct nbd_device *nbd, unsigned long arg,
sockfd_put(sock);
return -ENOMEM;
}
+
+ config->socks = socks;
+
nsock = kzalloc(sizeof(struct nbd_sock), GFP_KERNEL);
if (!nsock) {
sockfd_put(sock);
return -ENOMEM;
}
- config->socks = socks;
-
nsock->fallback_index = -1;
nsock->dead = false;
mutex_init(&nsock->tx_lock);
diff --git a/drivers/bluetooth/hci_bcsp.c b/drivers/bluetooth/hci_bcsp.c
index fe2e307009f4..cf4a56095817 100644
--- a/drivers/bluetooth/hci_bcsp.c
+++ b/drivers/bluetooth/hci_bcsp.c
@@ -591,6 +591,7 @@ static int bcsp_recv(struct hci_uart *hu, const void *data, int count)
if (*ptr == 0xc0) {
BT_ERR("Short BCSP packet");
kfree_skb(bcsp->rx_skb);
+ bcsp->rx_skb = NULL;
bcsp->rx_state = BCSP_W4_PKT_START;
bcsp->rx_count = 0;
} else
@@ -606,6 +607,7 @@ static int bcsp_recv(struct hci_uart *hu, const void *data, int count)
bcsp->rx_skb->data[2])) != bcsp->rx_skb->data[3]) {
BT_ERR("Error in BCSP hdr checksum");
kfree_skb(bcsp->rx_skb);
+ bcsp->rx_skb = NULL;
bcsp->rx_state = BCSP_W4_PKT_DELIMITER;
bcsp->rx_count = 0;
continue;
@@ -630,6 +632,7 @@ static int bcsp_recv(struct hci_uart *hu, const void *data, int count)
bscp_get_crc(bcsp));
kfree_skb(bcsp->rx_skb);
+ bcsp->rx_skb = NULL;
bcsp->rx_state = BCSP_W4_PKT_DELIMITER;
bcsp->rx_count = 0;
continue;
diff --git a/drivers/bluetooth/hci_ll.c b/drivers/bluetooth/hci_ll.c
index 285706618f8a..d9a4c6c691e0 100644
--- a/drivers/bluetooth/hci_ll.c
+++ b/drivers/bluetooth/hci_ll.c
@@ -621,13 +621,6 @@ static int ll_setup(struct hci_uart *hu)
serdev_device_set_flow_control(serdev, true);
- if (hu->oper_speed)
- speed = hu->oper_speed;
- else if (hu->proto->oper_speed)
- speed = hu->proto->oper_speed;
- else
- speed = 0;
-
do {
/* Reset the Bluetooth device */
gpiod_set_value_cansleep(lldev->enable_gpio, 0);
@@ -639,20 +632,6 @@ static int ll_setup(struct hci_uart *hu)
return err;
}
- if (speed) {
- __le32 speed_le = cpu_to_le32(speed);
- struct sk_buff *skb;
-
- skb = __hci_cmd_sync(hu->hdev,
- HCI_VS_UPDATE_UART_HCI_BAUDRATE,
- sizeof(speed_le), &speed_le,
- HCI_INIT_TIMEOUT);
- if (!IS_ERR(skb)) {
- kfree_skb(skb);
- serdev_device_set_baudrate(serdev, speed);
- }
- }
-
err = download_firmware(lldev);
if (!err)
break;
@@ -677,7 +656,25 @@ static int ll_setup(struct hci_uart *hu)
}
/* Operational speed if any */
+ if (hu->oper_speed)
+ speed = hu->oper_speed;
+ else if (hu->proto->oper_speed)
+ speed = hu->proto->oper_speed;
+ else
+ speed = 0;
+
+ if (speed) {
+ __le32 speed_le = cpu_to_le32(speed);
+ struct sk_buff *skb;
+ skb = __hci_cmd_sync(hu->hdev, HCI_VS_UPDATE_UART_HCI_BAUDRATE,
+ sizeof(speed_le), &speed_le,
+ HCI_INIT_TIMEOUT);
+ if (!IS_ERR(skb)) {
+ kfree_skb(skb);
+ serdev_device_set_baudrate(serdev, speed);
+ }
+ }
return 0;
}
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 48a224a6b178..bc19d6c16aaa 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -933,6 +933,9 @@ static ssize_t show(struct kobject *kobj, struct attribute *attr, char *buf)
struct freq_attr *fattr = to_attr(attr);
ssize_t ret;
+ if (!fattr->show)
+ return -EIO;
+
down_read(&policy->rwsem);
ret = fattr->show(policy, buf);
up_read(&policy->rwsem);
@@ -947,6 +950,9 @@ static ssize_t store(struct kobject *kobj, struct attribute *attr,
struct freq_attr *fattr = to_attr(attr);
ssize_t ret = -EINVAL;
+ if (!fattr->store)
+ return -EIO;
+
/*
* cpus_read_trylock() is used here to work around a circular lock
* dependency problem with respect to the cpufreq_register_driver().
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index f87f6495652f..eb9782fc93fe 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -2700,21 +2700,18 @@ static int crypt_ctr(struct dm_target *ti, unsigned int argc, char **argv)
}
ret = -ENOMEM;
- cc->io_queue = alloc_workqueue("kcryptd_io/%s",
- WQ_HIGHPRI | WQ_CPU_INTENSIVE | WQ_MEM_RECLAIM,
- 1, devname);
+ cc->io_queue = alloc_workqueue("kcryptd_io/%s", WQ_MEM_RECLAIM, 1, devname);
if (!cc->io_queue) {
ti->error = "Couldn't create kcryptd io queue";
goto bad;
}
if (test_bit(DM_CRYPT_SAME_CPU, &cc->flags))
- cc->crypt_queue = alloc_workqueue("kcryptd/%s",
- WQ_HIGHPRI | WQ_CPU_INTENSIVE | WQ_MEM_RECLAIM,
+ cc->crypt_queue = alloc_workqueue("kcryptd/%s", WQ_CPU_INTENSIVE | WQ_MEM_RECLAIM,
1, devname);
else
cc->crypt_queue = alloc_workqueue("kcryptd/%s",
- WQ_HIGHPRI | WQ_CPU_INTENSIVE | WQ_MEM_RECLAIM | WQ_UNBOUND,
+ WQ_CPU_INTENSIVE | WQ_MEM_RECLAIM | WQ_UNBOUND,
num_online_cpus(), devname);
if (!cc->crypt_queue) {
ti->error = "Couldn't create kcryptd queue";
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 299c7b1c9718..8a62c920bb65 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -191,7 +191,7 @@ static void * r10buf_pool_alloc(gfp_t gfp_flags, void *data)
out_free_pages:
while (--j >= 0)
- resync_free_pages(&rps[j * 2]);
+ resync_free_pages(&rps[j]);
j = 0;
out_free_bio:
diff --git a/drivers/media/platform/vivid/vivid-kthread-cap.c b/drivers/media/platform/vivid/vivid-kthread-cap.c
index 003319d7816d..31f78d6a05a4 100644
--- a/drivers/media/platform/vivid/vivid-kthread-cap.c
+++ b/drivers/media/platform/vivid/vivid-kthread-cap.c
@@ -796,7 +796,11 @@ static int vivid_thread_vid_cap(void *data)
if (kthread_should_stop())
break;
- mutex_lock(&dev->mutex);
+ if (!mutex_trylock(&dev->mutex)) {
+ schedule_timeout_uninterruptible(1);
+ continue;
+ }
+
cur_jiffies = jiffies;
if (dev->cap_seq_resync) {
dev->jiffies_vid_cap = cur_jiffies;
@@ -956,8 +960,6 @@ void vivid_stop_generating_vid_cap(struct vivid_dev *dev, bool *pstreaming)
/* shutdown control thread */
vivid_grab_controls(dev, false);
- mutex_unlock(&dev->mutex);
kthread_stop(dev->kthread_vid_cap);
dev->kthread_vid_cap = NULL;
- mutex_lock(&dev->mutex);
}
diff --git a/drivers/media/platform/vivid/vivid-kthread-out.c b/drivers/media/platform/vivid/vivid-kthread-out.c
index ce5bcda2348c..1e165a6a2207 100644
--- a/drivers/media/platform/vivid/vivid-kthread-out.c
+++ b/drivers/media/platform/vivid/vivid-kthread-out.c
@@ -143,7 +143,11 @@ static int vivid_thread_vid_out(void *data)
if (kthread_should_stop())
break;
- mutex_lock(&dev->mutex);
+ if (!mutex_trylock(&dev->mutex)) {
+ schedule_timeout_uninterruptible(1);
+ continue;
+ }
+
cur_jiffies = jiffies;
if (dev->out_seq_resync) {
dev->jiffies_vid_out = cur_jiffies;
@@ -301,8 +305,6 @@ void vivid_stop_generating_vid_out(struct vivid_dev *dev, bool *pstreaming)
/* shutdown control thread */
vivid_grab_controls(dev, false);
- mutex_unlock(&dev->mutex);
kthread_stop(dev->kthread_vid_out);
dev->kthread_vid_out = NULL;
- mutex_lock(&dev->mutex);
}
diff --git a/drivers/media/platform/vivid/vivid-sdr-cap.c b/drivers/media/platform/vivid/vivid-sdr-cap.c
index 9acc709b0740..2b7522e16efc 100644
--- a/drivers/media/platform/vivid/vivid-sdr-cap.c
+++ b/drivers/media/platform/vivid/vivid-sdr-cap.c
@@ -141,7 +141,11 @@ static int vivid_thread_sdr_cap(void *data)
if (kthread_should_stop())
break;
- mutex_lock(&dev->mutex);
+ if (!mutex_trylock(&dev->mutex)) {
+ schedule_timeout_uninterruptible(1);
+ continue;
+ }
+
cur_jiffies = jiffies;
if (dev->sdr_cap_seq_resync) {
dev->jiffies_sdr_cap = cur_jiffies;
@@ -303,10 +307,8 @@ static void sdr_cap_stop_streaming(struct vb2_queue *vq)
}
/* shutdown control thread */
- mutex_unlock(&dev->mutex);
kthread_stop(dev->kthread_sdr_cap);
dev->kthread_sdr_cap = NULL;
- mutex_lock(&dev->mutex);
}
static void sdr_cap_buf_request_complete(struct vb2_buffer *vb)
diff --git a/drivers/media/platform/vivid/vivid-vid-cap.c b/drivers/media/platform/vivid/vivid-vid-cap.c
index 8cbaa0c998ed..2d030732feac 100644
--- a/drivers/media/platform/vivid/vivid-vid-cap.c
+++ b/drivers/media/platform/vivid/vivid-vid-cap.c
@@ -223,9 +223,6 @@ static int vid_cap_start_streaming(struct vb2_queue *vq, unsigned count)
if (vb2_is_streaming(&dev->vb_vid_out_q))
dev->can_loop_video = vivid_vid_can_loop(dev);
- if (dev->kthread_vid_cap)
- return 0;
-
dev->vid_cap_seq_count = 0;
dprintk(dev, 1, "%s\n", __func__);
for (i = 0; i < VIDEO_MAX_FRAME; i++)
diff --git a/drivers/media/platform/vivid/vivid-vid-out.c b/drivers/media/platform/vivid/vivid-vid-out.c
index 148b663a6075..a0364ac497f9 100644
--- a/drivers/media/platform/vivid/vivid-vid-out.c
+++ b/drivers/media/platform/vivid/vivid-vid-out.c
@@ -161,9 +161,6 @@ static int vid_out_start_streaming(struct vb2_queue *vq, unsigned count)
if (vb2_is_streaming(&dev->vb_vid_cap_q))
dev->can_loop_video = vivid_vid_can_loop(dev);
- if (dev->kthread_vid_out)
- return 0;
-
dev->vid_out_seq_count = 0;
dprintk(dev, 1, "%s\n", __func__);
if (dev->start_streaming_error) {
diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
index 37a850421fbb..c683a244b9fa 100644
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -1598,8 +1598,7 @@ static void imon_incoming_packet(struct imon_context *ictx,
spin_unlock_irqrestore(&ictx->kc_lock, flags);
/* send touchscreen events through input subsystem if touchpad data */
- if (ictx->display_type == IMON_DISPLAY_TYPE_VGA && len == 8 &&
- buf[7] == 0x86) {
+ if (ictx->touch && len == 8 && buf[7] == 0x86) {
imon_touch_event(ictx, buf);
return;
diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index 3fc9829a9233..f9616158bcf4 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -564,7 +564,7 @@ static int mceusb_cmd_datasize(u8 cmd, u8 subcmd)
datasize = 4;
break;
case MCE_CMD_G_REVISION:
- datasize = 2;
+ datasize = 4;
break;
case MCE_RSP_EQWAKESUPPORT:
case MCE_RSP_GETWAKESOURCE:
@@ -600,14 +600,9 @@ static void mceusb_dev_printdata(struct mceusb_dev *ir, u8 *buf, int buf_len,
char *inout;
u8 cmd, subcmd, *data;
struct device *dev = ir->dev;
- int start, skip = 0;
u32 carrier, period;
- /* skip meaningless 0xb1 0x60 header bytes on orig receiver */
- if (ir->flags.microsoft_gen1 && !out && !offset)
- skip = 2;
-
- if (len <= skip)
+ if (offset < 0 || offset >= buf_len)
return;
dev_dbg(dev, "%cx data[%d]: %*ph (len=%d sz=%d)",
@@ -616,11 +611,32 @@ static void mceusb_dev_printdata(struct mceusb_dev *ir, u8 *buf, int buf_len,
inout = out ? "Request" : "Got";
- start = offset + skip;
- cmd = buf[start] & 0xff;
- subcmd = buf[start + 1] & 0xff;
- data = buf + start + 2;
+ cmd = buf[offset];
+ subcmd = (offset + 1 < buf_len) ? buf[offset + 1] : 0;
+ data = &buf[offset] + 2;
+
+ /* Trace meaningless 0xb1 0x60 header bytes on original receiver */
+ if (ir->flags.microsoft_gen1 && !out && !offset) {
+ dev_dbg(dev, "MCE gen 1 header");
+ return;
+ }
+
+ /* Trace IR data header or trailer */
+ if (cmd != MCE_CMD_PORT_IR &&
+ (cmd & MCE_PORT_MASK) == MCE_COMMAND_IRDATA) {
+ if (cmd == MCE_IRDATA_TRAILER)
+ dev_dbg(dev, "End of raw IR data");
+ else
+ dev_dbg(dev, "Raw IR data, %d pulse/space samples",
+ cmd & MCE_PACKET_LENGTH_MASK);
+ return;
+ }
+
+ /* Unexpected end of buffer? */
+ if (offset + len > buf_len)
+ return;
+ /* Decode MCE command/response */
switch (cmd) {
case MCE_CMD_NULL:
if (subcmd == MCE_CMD_NULL)
@@ -644,7 +660,7 @@ static void mceusb_dev_printdata(struct mceusb_dev *ir, u8 *buf, int buf_len,
dev_dbg(dev, "Get hw/sw rev?");
else
dev_dbg(dev, "hw/sw rev %*ph",
- 4, &buf[start + 2]);
+ 4, &buf[offset + 2]);
break;
case MCE_CMD_RESUME:
dev_dbg(dev, "Device resume requested");
@@ -746,13 +762,6 @@ static void mceusb_dev_printdata(struct mceusb_dev *ir, u8 *buf, int buf_len,
default:
break;
}
-
- if (cmd == MCE_IRDATA_TRAILER)
- dev_dbg(dev, "End of raw IR data");
- else if ((cmd != MCE_CMD_PORT_IR) &&
- ((cmd & MCE_PORT_MASK) == MCE_COMMAND_IRDATA))
- dev_dbg(dev, "Raw IR data, %d pulse/space samples",
- cmd & MCE_PACKET_LENGTH_MASK);
#endif
}
@@ -1136,32 +1145,62 @@ static int mceusb_set_rx_carrier_report(struct rc_dev *dev, int enable)
}
/*
+ * Handle PORT_SYS/IR command response received from the MCE device.
+ *
+ * Assumes single response with all its data (not truncated)
+ * in buf_in[]. The response itself determines its total length
+ * (mceusb_cmd_datasize() + 2) and hence the minimum size of buf_in[].
+ *
* We don't do anything but print debug spew for many of the command bits
* we receive from the hardware, but some of them are useful information
* we want to store so that we can use them.
*/
-static void mceusb_handle_command(struct mceusb_dev *ir, int index)
+static void mceusb_handle_command(struct mceusb_dev *ir, u8 *buf_in)
{
+ u8 cmd = buf_in[0];
+ u8 subcmd = buf_in[1];
+ u8 *hi = &buf_in[2]; /* read only when required */
+ u8 *lo = &buf_in[3]; /* read only when required */
struct ir_raw_event rawir = {};
- u8 hi = ir->buf_in[index + 1] & 0xff;
- u8 lo = ir->buf_in[index + 2] & 0xff;
u32 carrier_cycles;
u32 cycles_fix;
- switch (ir->buf_in[index]) {
- /* the one and only 5-byte return value command */
- case MCE_RSP_GETPORTSTATUS:
- if ((ir->buf_in[index + 4] & 0xff) == 0x00)
- ir->txports_cabled |= 1 << hi;
- break;
+ if (cmd == MCE_CMD_PORT_SYS) {
+ switch (subcmd) {
+ /* the one and only 5-byte return value command */
+ case MCE_RSP_GETPORTSTATUS:
+ if (buf_in[5] == 0)
+ ir->txports_cabled |= 1 << *hi;
+ break;
+
+ /* 1-byte return value commands */
+ case MCE_RSP_EQEMVER:
+ ir->emver = *hi;
+ break;
+
+ /* No return value commands */
+ case MCE_RSP_CMD_ILLEGAL:
+ ir->need_reset = true;
+ break;
+
+ default:
+ break;
+ }
+
+ return;
+ }
+ if (cmd != MCE_CMD_PORT_IR)
+ return;
+
+ switch (subcmd) {
/* 2-byte return value commands */
case MCE_RSP_EQIRTIMEOUT:
- ir->rc->timeout = US_TO_NS((hi << 8 | lo) * MCE_TIME_UNIT);
+ ir->rc->timeout = US_TO_NS((*hi << 8 | *lo) * MCE_TIME_UNIT);
break;
case MCE_RSP_EQIRNUMPORTS:
- ir->num_txports = hi;
- ir->num_rxports = lo;
+ ir->num_txports = *hi;
+ ir->num_rxports = *lo;
break;
case MCE_RSP_EQIRRXCFCNT:
/*
@@ -1174,7 +1213,7 @@ static void mceusb_handle_command(struct mceusb_dev *ir, int index)
*/
if (ir->carrier_report_enabled && ir->learning_active &&
ir->pulse_tunit > 0) {
- carrier_cycles = (hi << 8 | lo);
+ carrier_cycles = (*hi << 8 | *lo);
/*
* Adjust carrier cycle count by adding
* 1 missed count per pulse "on"
@@ -1192,24 +1231,24 @@ static void mceusb_handle_command(struct mceusb_dev *ir, int index)
break;
/* 1-byte return value commands */
- case MCE_RSP_EQEMVER:
- ir->emver = hi;
- break;
case MCE_RSP_EQIRTXPORTS:
- ir->tx_mask = hi;
+ ir->tx_mask = *hi;
break;
case MCE_RSP_EQIRRXPORTEN:
- ir->learning_active = ((hi & 0x02) == 0x02);
- if (ir->rxports_active != hi) {
+ ir->learning_active = ((*hi & 0x02) == 0x02);
+ if (ir->rxports_active != *hi) {
dev_info(ir->dev, "%s-range (0x%x) receiver active",
- ir->learning_active ? "short" : "long", hi);
- ir->rxports_active = hi;
+ ir->learning_active ? "short" : "long", *hi);
+ ir->rxports_active = *hi;
}
break;
+
+ /* No return value commands */
case MCE_RSP_CMD_ILLEGAL:
case MCE_RSP_TX_TIMEOUT:
ir->need_reset = true;
break;
+
default:
break;
}
@@ -1235,7 +1274,8 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
ir->rem = mceusb_cmd_datasize(ir->cmd, ir->buf_in[i]);
mceusb_dev_printdata(ir, ir->buf_in, buf_len, i - 1,
ir->rem + 2, false);
- mceusb_handle_command(ir, i);
+ if (i + ir->rem < buf_len)
+ mceusb_handle_command(ir, &ir->buf_in[i - 1]);
ir->parser_state = CMD_DATA;
break;
case PARSE_IRDATA:
@@ -1264,15 +1304,22 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
ir->rem--;
break;
case CMD_HEADER:
- /* decode mce packets of the form (84),AA,BB,CC,DD */
- /* IR data packets can span USB messages - rem */
ir->cmd = ir->buf_in[i];
if ((ir->cmd == MCE_CMD_PORT_IR) ||
((ir->cmd & MCE_PORT_MASK) !=
MCE_COMMAND_IRDATA)) {
+ /*
+ * got PORT_SYS, PORT_IR, or unknown
+ * command response prefix
+ */
ir->parser_state = SUBCMD;
continue;
}
+ /*
+ * got IR data prefix (0x80 + num_bytes)
+ * decode MCE packets of the form {0x83, AA, BB, CC}
+ * IR data packets can span USB messages
+ */
ir->rem = (ir->cmd & MCE_PACKET_LENGTH_MASK);
mceusb_dev_printdata(ir, ir->buf_in, buf_len,
i, ir->rem + 1, false);
@@ -1296,6 +1343,14 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
if (ir->parser_state != CMD_HEADER && !ir->rem)
ir->parser_state = CMD_HEADER;
}
+
+ /*
+ * Accept IR data spanning multiple rx buffers.
+ * Reject MCE command response spanning multiple rx buffers.
+ */
+ if (ir->parser_state != PARSE_IRDATA || !ir->rem)
+ ir->parser_state = CMD_HEADER;
+
if (event) {
dev_dbg(ir->dev, "processed IR data");
ir_raw_event_handle(ir->rc);
diff --git a/drivers/media/usb/b2c2/flexcop-usb.c b/drivers/media/usb/b2c2/flexcop-usb.c
index 1826ff825c2e..1a801dc286f8 100644
--- a/drivers/media/usb/b2c2/flexcop-usb.c
+++ b/drivers/media/usb/b2c2/flexcop-usb.c
@@ -538,6 +538,9 @@ static int flexcop_usb_probe(struct usb_interface *intf,
struct flexcop_device *fc = NULL;
int ret;
+ if (intf->cur_altsetting->desc.bNumEndpoints < 1)
+ return -ENODEV;
+
if ((fc = flexcop_device_kmalloc(sizeof(struct flexcop_usb))) == NULL) {
err("out of memory\n");
return -ENOMEM;
diff --git a/drivers/media/usb/dvb-usb/cxusb.c b/drivers/media/usb/dvb-usb/cxusb.c
index f02fa0a67aa4..fac19ec46089 100644
--- a/drivers/media/usb/dvb-usb/cxusb.c
+++ b/drivers/media/usb/dvb-usb/cxusb.c
@@ -521,7 +521,8 @@ static int cxusb_rc_query(struct dvb_usb_device *d)
{
u8 ircode[4];
- cxusb_ctrl_msg(d, CMD_GET_IR_CODE, NULL, 0, ircode, 4);
+ if (cxusb_ctrl_msg(d, CMD_GET_IR_CODE, NULL, 0, ircode, 4) < 0)
+ return 0;
if (ircode[2] || ircode[3])
rc_keydown(d->rc_dev, RC_PROTO_NEC,
diff --git a/drivers/media/usb/usbvision/usbvision-video.c b/drivers/media/usb/usbvision/usbvision-video.c
index cdc66adda755..93d36aab824f 100644
--- a/drivers/media/usb/usbvision/usbvision-video.c
+++ b/drivers/media/usb/usbvision/usbvision-video.c
@@ -314,6 +314,10 @@ static int usbvision_v4l2_open(struct file *file)
if (mutex_lock_interruptible(&usbvision->v4l2_lock))
return -ERESTARTSYS;
+ if (usbvision->remove_pending) {
+ err_code = -ENODEV;
+ goto unlock;
+ }
if (usbvision->user) {
err_code = -EBUSY;
} else {
@@ -377,6 +381,7 @@ static int usbvision_v4l2_open(struct file *file)
static int usbvision_v4l2_close(struct file *file)
{
struct usb_usbvision *usbvision = video_drvdata(file);
+ int r;
PDEBUG(DBG_IO, "close");
@@ -391,9 +396,10 @@ static int usbvision_v4l2_close(struct file *file)
usbvision_scratch_free(usbvision);
usbvision->user--;
+ r = usbvision->remove_pending;
mutex_unlock(&usbvision->v4l2_lock);
- if (usbvision->remove_pending) {
+ if (r) {
printk(KERN_INFO "%s: Final disconnect\n", __func__);
usbvision_release(usbvision);
return 0;
@@ -453,6 +459,9 @@ static int vidioc_querycap(struct file *file, void *priv,
{
struct usb_usbvision *usbvision = video_drvdata(file);
+ if (!usbvision->dev)
+ return -ENODEV;
+
strscpy(vc->driver, "USBVision", sizeof(vc->driver));
strscpy(vc->card,
usbvision_device_data[usbvision->dev_model].model_string,
@@ -1061,6 +1070,11 @@ static int usbvision_radio_open(struct file *file)
if (mutex_lock_interruptible(&usbvision->v4l2_lock))
return -ERESTARTSYS;
+
+ if (usbvision->remove_pending) {
+ err_code = -ENODEV;
+ goto out;
+ }
err_code = v4l2_fh_open(file);
if (err_code)
goto out;
@@ -1093,21 +1107,24 @@ static int usbvision_radio_open(struct file *file)
static int usbvision_radio_close(struct file *file)
{
struct usb_usbvision *usbvision = video_drvdata(file);
+ int r;
PDEBUG(DBG_IO, "");
mutex_lock(&usbvision->v4l2_lock);
/* Set packet size to 0 */
usbvision->iface_alt = 0;
- usb_set_interface(usbvision->dev, usbvision->iface,
- usbvision->iface_alt);
+ if (usbvision->dev)
+ usb_set_interface(usbvision->dev, usbvision->iface,
+ usbvision->iface_alt);
usbvision_audio_off(usbvision);
usbvision->radio = 0;
usbvision->user--;
+ r = usbvision->remove_pending;
mutex_unlock(&usbvision->v4l2_lock);
- if (usbvision->remove_pending) {
+ if (r) {
printk(KERN_INFO "%s: Final disconnect\n", __func__);
v4l2_fh_release(file);
usbvision_release(usbvision);
@@ -1539,6 +1556,7 @@ static int usbvision_probe(struct usb_interface *intf,
static void usbvision_disconnect(struct usb_interface *intf)
{
struct usb_usbvision *usbvision = to_usbvision(usb_get_intfdata(intf));
+ int u;
PDEBUG(DBG_PROBE, "");
@@ -1555,13 +1573,14 @@ static void usbvision_disconnect(struct usb_interface *intf)
v4l2_device_disconnect(&usbvision->v4l2_dev);
usbvision_i2c_unregister(usbvision);
usbvision->remove_pending = 1; /* Now all ISO data will be ignored */
+ u = usbvision->user;
usb_put_dev(usbvision->dev);
usbvision->dev = NULL; /* USB device is no more */
mutex_unlock(&usbvision->v4l2_lock);
- if (usbvision->user) {
+ if (u) {
printk(KERN_INFO "%s: In use, disconnect pending\n",
__func__);
wake_up_interruptible(&usbvision->wait_frame);
diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c
index 66ee168ddc7e..428235ca2635 100644
--- a/drivers/media/usb/uvc/uvc_driver.c
+++ b/drivers/media/usb/uvc/uvc_driver.c
@@ -2151,6 +2151,20 @@ static int uvc_probe(struct usb_interface *intf,
sizeof(dev->name) - len);
}
+ /* Initialize the media device. */
+#ifdef CONFIG_MEDIA_CONTROLLER
+ dev->mdev.dev = &intf->dev;
+ strscpy(dev->mdev.model, dev->name, sizeof(dev->mdev.model));
+ if (udev->serial)
+ strscpy(dev->mdev.serial, udev->serial,
+ sizeof(dev->mdev.serial));
+ usb_make_path(udev, dev->mdev.bus_info, sizeof(dev->mdev.bus_info));
+ dev->mdev.hw_revision = le16_to_cpu(udev->descriptor.bcdDevice);
+ media_device_init(&dev->mdev);
+
+ dev->vdev.mdev = &dev->mdev;
+#endif
+
/* Parse the Video Class control descriptor. */
if (uvc_parse_control(dev) < 0) {
uvc_trace(UVC_TRACE_PROBE, "Unable to parse UVC "
@@ -2171,19 +2185,7 @@ static int uvc_probe(struct usb_interface *intf,
"linux-uvc-devel mailing list.\n");
}
- /* Initialize the media device and register the V4L2 device. */
-#ifdef CONFIG_MEDIA_CONTROLLER
- dev->mdev.dev = &intf->dev;
- strscpy(dev->mdev.model, dev->name, sizeof(dev->mdev.model));
- if (udev->serial)
- strscpy(dev->mdev.serial, udev->serial,
- sizeof(dev->mdev.serial));
- usb_make_path(udev, dev->mdev.bus_info, sizeof(dev->mdev.bus_info));
- dev->mdev.hw_revision = le16_to_cpu(udev->descriptor.bcdDevice);
- media_device_init(&dev->mdev);
-
- dev->vdev.mdev = &dev->mdev;
-#endif
+ /* Register the V4L2 device. */
if (v4l2_device_register(&intf->dev, &dev->vdev) < 0)
goto error;
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index a0b4d265c6eb..347bb92e4130 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -3490,7 +3490,7 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
struct ath10k_pci *ar_pci;
enum ath10k_hw_rev hw_rev;
struct ath10k_bus_params bus_params = {};
- bool pci_ps;
+ bool pci_ps, is_qca988x = false;
int (*pci_soft_reset)(struct ath10k *ar);
int (*pci_hard_reset)(struct ath10k *ar);
u32 (*targ_cpu_to_ce_addr)(struct ath10k *ar, u32 addr);
@@ -3500,6 +3500,7 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
case QCA988X_2_0_DEVICE_ID:
hw_rev = ATH10K_HW_QCA988X;
pci_ps = false;
+ is_qca988x = true;
pci_soft_reset = ath10k_pci_warm_reset;
pci_hard_reset = ath10k_pci_qca988x_chip_reset;
targ_cpu_to_ce_addr = ath10k_pci_qca988x_targ_cpu_to_ce_addr;
@@ -3619,25 +3620,34 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
goto err_deinit_irq;
}
+ bus_params.dev_type = ATH10K_DEV_TYPE_LL;
+ bus_params.link_can_suspend = true;
+ /* Read CHIP_ID before reset to catch QCA9880-AR1A v1 devices that
+ * fall off the bus during chip_reset. These chips have the same pci
+ * device id as the QCA9880 BR4A or 2R4E. So that's why the check.
+ */
+ if (is_qca988x) {
+ bus_params.chip_id =
+ ath10k_pci_soc_read32(ar, SOC_CHIP_ID_ADDRESS);
+ if (bus_params.chip_id != 0xffffffff) {
+ if (!ath10k_pci_chip_is_supported(pdev->device,
+ bus_params.chip_id))
+ goto err_unsupported;
+ }
+ }
+
ret = ath10k_pci_chip_reset(ar);
if (ret) {
ath10k_err(ar, "failed to reset chip: %d\n", ret);
goto err_free_irq;
}
- bus_params.dev_type = ATH10K_DEV_TYPE_LL;
- bus_params.link_can_suspend = true;
bus_params.chip_id = ath10k_pci_soc_read32(ar, SOC_CHIP_ID_ADDRESS);
- if (bus_params.chip_id == 0xffffffff) {
- ath10k_err(ar, "failed to get chip id\n");
- goto err_free_irq;
- }
+ if (bus_params.chip_id == 0xffffffff)
+ goto err_unsupported;
- if (!ath10k_pci_chip_is_supported(pdev->device, bus_params.chip_id)) {
- ath10k_err(ar, "device %04x with chip_id %08x isn't supported\n",
- pdev->device, bus_params.chip_id);
+ if (!ath10k_pci_chip_is_supported(pdev->device, bus_params.chip_id))
goto err_free_irq;
- }
ret = ath10k_core_register(ar, &bus_params);
if (ret) {
@@ -3647,6 +3657,10 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
return 0;
+err_unsupported:
+ ath10k_err(ar, "device %04x with chip_id %08x isn't supported\n",
+ pdev->device, bus_params.chip_id);
+
err_free_irq:
ath10k_pci_free_irq(ar);
ath10k_pci_rx_retry_sync(ar);
diff --git a/drivers/net/wireless/ath/ath10k/qmi.c b/drivers/net/wireless/ath/ath10k/qmi.c
index 3b63b6257c43..545ac1f06997 100644
--- a/drivers/net/wireless/ath/ath10k/qmi.c
+++ b/drivers/net/wireless/ath/ath10k/qmi.c
@@ -581,22 +581,29 @@ static int ath10k_qmi_host_cap_send_sync(struct ath10k_qmi *qmi)
{
struct wlfw_host_cap_resp_msg_v01 resp = {};
struct wlfw_host_cap_req_msg_v01 req = {};
+ struct qmi_elem_info *req_ei;
struct ath10k *ar = qmi->ar;
+ struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar);
struct qmi_txn txn;
int ret;
req.daemon_support_valid = 1;
req.daemon_support = 0;
- ret = qmi_txn_init(&qmi->qmi_hdl, &txn,
- wlfw_host_cap_resp_msg_v01_ei, &resp);
+ ret = qmi_txn_init(&qmi->qmi_hdl, &txn, wlfw_host_cap_resp_msg_v01_ei,
+ &resp);
if (ret < 0)
goto out;
+ if (test_bit(ATH10K_SNOC_FLAG_8BIT_HOST_CAP_QUIRK, &ar_snoc->flags))
+ req_ei = wlfw_host_cap_8bit_req_msg_v01_ei;
+ else
+ req_ei = wlfw_host_cap_req_msg_v01_ei;
+
ret = qmi_send_request(&qmi->qmi_hdl, NULL, &txn,
QMI_WLFW_HOST_CAP_REQ_V01,
WLFW_HOST_CAP_REQ_MSG_V01_MAX_MSG_LEN,
- wlfw_host_cap_req_msg_v01_ei, &req);
+ req_ei, &req);
if (ret < 0) {
qmi_txn_cancel(&txn);
ath10k_err(ar, "failed to send host capability request: %d\n", ret);
diff --git a/drivers/net/wireless/ath/ath10k/qmi_wlfw_v01.c b/drivers/net/wireless/ath/ath10k/qmi_wlfw_v01.c
index 1fe05c6218c3..86fcf4e1de5f 100644
--- a/drivers/net/wireless/ath/ath10k/qmi_wlfw_v01.c
+++ b/drivers/net/wireless/ath/ath10k/qmi_wlfw_v01.c
@@ -1988,6 +1988,28 @@ struct qmi_elem_info wlfw_host_cap_req_msg_v01_ei[] = {
{}
};
+struct qmi_elem_info wlfw_host_cap_8bit_req_msg_v01_ei[] = {
+ {
+ .data_type = QMI_OPT_FLAG,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x10,
+ .offset = offsetof(struct wlfw_host_cap_req_msg_v01,
+ daemon_support_valid),
+ },
+ {
+ .data_type = QMI_UNSIGNED_1_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x10,
+ .offset = offsetof(struct wlfw_host_cap_req_msg_v01,
+ daemon_support),
+ },
+ {}
+};
+
struct qmi_elem_info wlfw_host_cap_resp_msg_v01_ei[] = {
{
.data_type = QMI_STRUCT,
diff --git a/drivers/net/wireless/ath/ath10k/qmi_wlfw_v01.h b/drivers/net/wireless/ath/ath10k/qmi_wlfw_v01.h
index bca1186e1560..4d107e1364a8 100644
--- a/drivers/net/wireless/ath/ath10k/qmi_wlfw_v01.h
+++ b/drivers/net/wireless/ath/ath10k/qmi_wlfw_v01.h
@@ -575,6 +575,7 @@ struct wlfw_host_cap_req_msg_v01 {
#define WLFW_HOST_CAP_REQ_MSG_V01_MAX_MSG_LEN 189
extern struct qmi_elem_info wlfw_host_cap_req_msg_v01_ei[];
+extern struct qmi_elem_info wlfw_host_cap_8bit_req_msg_v01_ei[];
struct wlfw_host_cap_resp_msg_v01 {
struct qmi_response_type_v01 resp;
diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c
index b491361e6ed4..fc15a0037f0e 100644
--- a/drivers/net/wireless/ath/ath10k/snoc.c
+++ b/drivers/net/wireless/ath/ath10k/snoc.c
@@ -1261,6 +1261,15 @@ static int ath10k_snoc_resource_init(struct ath10k *ar)
return ret;
}
+static void ath10k_snoc_quirks_init(struct ath10k *ar)
+{
+ struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar);
+ struct device *dev = &ar_snoc->dev->dev;
+
+ if (of_property_read_bool(dev->of_node, "qcom,snoc-host-cap-8bit-quirk"))
+ set_bit(ATH10K_SNOC_FLAG_8BIT_HOST_CAP_QUIRK, &ar_snoc->flags);
+}
+
int ath10k_snoc_fw_indication(struct ath10k *ar, u64 type)
{
struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar);
@@ -1678,6 +1687,8 @@ static int ath10k_snoc_probe(struct platform_device *pdev)
ar->ce_priv = &ar_snoc->ce;
msa_size = drv_data->msa_size;
+ ath10k_snoc_quirks_init(ar);
+
ret = ath10k_snoc_resource_init(ar);
if (ret) {
ath10k_warn(ar, "failed to initialize resource: %d\n", ret);
diff --git a/drivers/net/wireless/ath/ath10k/snoc.h b/drivers/net/wireless/ath/ath10k/snoc.h
index d62f53501fbb..9db823e46314 100644
--- a/drivers/net/wireless/ath/ath10k/snoc.h
+++ b/drivers/net/wireless/ath/ath10k/snoc.h
@@ -63,6 +63,7 @@ enum ath10k_snoc_flags {
ATH10K_SNOC_FLAG_REGISTERED,
ATH10K_SNOC_FLAG_UNREGISTERING,
ATH10K_SNOC_FLAG_RECOVERY,
+ ATH10K_SNOC_FLAG_8BIT_HOST_CAP_QUIRK,
};
struct ath10k_snoc {
diff --git a/drivers/net/wireless/ath/ath10k/usb.c b/drivers/net/wireless/ath/ath10k/usb.c
index e1420f67f776..9ebe74ee4aef 100644
--- a/drivers/net/wireless/ath/ath10k/usb.c
+++ b/drivers/net/wireless/ath/ath10k/usb.c
@@ -38,6 +38,10 @@ ath10k_usb_alloc_urb_from_pipe(struct ath10k_usb_pipe *pipe)
struct ath10k_urb_context *urb_context = NULL;
unsigned long flags;
+ /* bail if this pipe is not initialized */
+ if (!pipe->ar_usb)
+ return NULL;
+
spin_lock_irqsave(&pipe->ar_usb->cs_lock, flags);
if (!list_empty(&pipe->urb_list_head)) {
urb_context = list_first_entry(&pipe->urb_list_head,
@@ -55,6 +59,10 @@ static void ath10k_usb_free_urb_to_pipe(struct ath10k_usb_pipe *pipe,
{
unsigned long flags;
+ /* bail if this pipe is not initialized */
+ if (!pipe->ar_usb)
+ return;
+
spin_lock_irqsave(&pipe->ar_usb->cs_lock, flags);
pipe->urb_cnt++;
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 2b29bf4730f6..b4885a700296 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -4183,7 +4183,7 @@ static void ar9003_hw_thermometer_apply(struct ath_hw *ah)
static void ar9003_hw_thermo_cal_apply(struct ath_hw *ah)
{
- u32 data, ko, kg;
+ u32 data = 0, ko, kg;
if (!AR_SREV_9462_20_OR_LATER(ah))
return;
diff --git a/drivers/staging/comedi/drivers/usbduxfast.c b/drivers/staging/comedi/drivers/usbduxfast.c
index 04bc488385e6..4af012968cb6 100644
--- a/drivers/staging/comedi/drivers/usbduxfast.c
+++ b/drivers/staging/comedi/drivers/usbduxfast.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (C) 2004-2014 Bernd Porr, mail@...ndporr.me.uk
+ * Copyright (C) 2004-2019 Bernd Porr, mail@...ndporr.me.uk
*/
/*
@@ -8,7 +8,7 @@
* Description: University of Stirling USB DAQ & INCITE Technology Limited
* Devices: [ITL] USB-DUX-FAST (usbduxfast)
* Author: Bernd Porr <mail@...ndporr.me.uk>
- * Updated: 10 Oct 2014
+ * Updated: 16 Nov 2019
* Status: stable
*/
@@ -22,6 +22,7 @@
*
*
* Revision history:
+ * 1.0: Fixed a rounding error in usbduxfast_ai_cmdtest
* 0.9: Dropping the first data packet which seems to be from the last transfer.
* Buffer overflows in the FX2 are handed over to comedi.
* 0.92: Dropping now 4 packets. The quad buffer has to be emptied.
@@ -350,6 +351,7 @@ static int usbduxfast_ai_cmdtest(struct comedi_device *dev,
struct comedi_cmd *cmd)
{
int err = 0;
+ int err2 = 0;
unsigned int steps;
unsigned int arg;
@@ -399,11 +401,16 @@ static int usbduxfast_ai_cmdtest(struct comedi_device *dev,
*/
steps = (cmd->convert_arg * 30) / 1000;
if (cmd->chanlist_len != 1)
- err |= comedi_check_trigger_arg_min(&steps,
- MIN_SAMPLING_PERIOD);
- err |= comedi_check_trigger_arg_max(&steps, MAX_SAMPLING_PERIOD);
- arg = (steps * 1000) / 30;
- err |= comedi_check_trigger_arg_is(&cmd->convert_arg, arg);
+ err2 |= comedi_check_trigger_arg_min(&steps,
+ MIN_SAMPLING_PERIOD);
+ else
+ err2 |= comedi_check_trigger_arg_min(&steps, 1);
+ err2 |= comedi_check_trigger_arg_max(&steps, MAX_SAMPLING_PERIOD);
+ if (err2) {
+ err |= err2;
+ arg = (steps * 1000) / 30;
+ err |= comedi_check_trigger_arg_is(&cmd->convert_arg, arg);
+ }
if (cmd->stop_src == TRIG_COUNT)
err |= comedi_check_trigger_arg_min(&cmd->stop_arg, 1);
diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c
index ac92725458b5..ba1eaabc7796 100644
--- a/drivers/usb/misc/appledisplay.c
+++ b/drivers/usb/misc/appledisplay.c
@@ -164,7 +164,12 @@ static int appledisplay_bl_get_brightness(struct backlight_device *bd)
0,
pdata->msgdata, 2,
ACD_USB_TIMEOUT);
- brightness = pdata->msgdata[1];
+ if (retval < 2) {
+ if (retval >= 0)
+ retval = -EMSGSIZE;
+ } else {
+ brightness = pdata->msgdata[1];
+ }
mutex_unlock(&pdata->sysfslock);
if (retval < 0)
@@ -299,6 +304,7 @@ static int appledisplay_probe(struct usb_interface *iface,
if (pdata) {
if (pdata->urb) {
usb_kill_urb(pdata->urb);
+ cancel_delayed_work_sync(&pdata->work);
if (pdata->urbdata)
usb_free_coherent(pdata->udev, ACD_URB_BUFFER_LEN,
pdata->urbdata, pdata->urb->transfer_dma);
diff --git a/drivers/usb/misc/chaoskey.c b/drivers/usb/misc/chaoskey.c
index 34e6cd6f40d3..87067c3d6109 100644
--- a/drivers/usb/misc/chaoskey.c
+++ b/drivers/usb/misc/chaoskey.c
@@ -384,13 +384,17 @@ static int _chaoskey_fill(struct chaoskey *dev)
!dev->reading,
(started ? NAK_TIMEOUT : ALEA_FIRST_TIMEOUT) );
- if (result < 0)
+ if (result < 0) {
+ usb_kill_urb(dev->urb);
goto out;
+ }
- if (result == 0)
+ if (result == 0) {
result = -ETIMEDOUT;
- else
+ usb_kill_urb(dev->urb);
+ } else {
result = dev->valid;
+ }
out:
/* Let the device go back to sleep eventually */
usb_autopm_put_interface(dev->interface);
@@ -526,7 +530,21 @@ static int chaoskey_suspend(struct usb_interface *interface,
static int chaoskey_resume(struct usb_interface *interface)
{
+ struct chaoskey *dev;
+ struct usb_device *udev = interface_to_usbdev(interface);
+
usb_dbg(interface, "resume");
+ dev = usb_get_intfdata(interface);
+
+ /*
+ * We may have lost power.
+ * In that case the device that needs a long time
+ * for the first requests needs an extended timeout
+ * again
+ */
+ if (le16_to_cpu(udev->descriptor.idVendor) == ALEA_VENDOR_ID)
+ dev->reads_started = false;
+
return 0;
}
#else
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 979bef9bfb6b..f5143eedbc48 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -125,6 +125,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
{ USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */
{ USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
+ { USB_DEVICE(0x10C4, 0x83AA) }, /* Mark-10 Digital Force Gauge */
{ USB_DEVICE(0x10C4, 0x83D8) }, /* DekTec DTA Plus VHF/UHF Booster/Attenuator */
{ USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
{ USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 18110225d506..2ec4eeacebc7 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -1833,10 +1833,6 @@ static int mos7720_startup(struct usb_serial *serial)
product = le16_to_cpu(serial->dev->descriptor.idProduct);
dev = serial->dev;
- /* setting configuration feature to one */
- usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
- (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5000);
-
if (product == MOSCHIP_DEVICE_ID_7715) {
struct urb *urb = serial->port[0]->interrupt_in_urb;
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index a698d46ba773..ab4bf8d6d7df 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -119,11 +119,15 @@
/* This driver also supports
* ATEN UC2324 device using Moschip MCS7840
* ATEN UC2322 device using Moschip MCS7820
+ * MOXA UPort 2210 device using Moschip MCS7820
*/
#define USB_VENDOR_ID_ATENINTL 0x0557
#define ATENINTL_DEVICE_ID_UC2324 0x2011
#define ATENINTL_DEVICE_ID_UC2322 0x7820
+#define USB_VENDOR_ID_MOXA 0x110a
+#define MOXA_DEVICE_ID_2210 0x2210
+
/* Interrupt Routine Defines */
#define SERIAL_IIR_RLS 0x06
@@ -195,6 +199,7 @@ static const struct usb_device_id id_table[] = {
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)},
{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
+ {USB_DEVICE(USB_VENDOR_ID_MOXA, MOXA_DEVICE_ID_2210)},
{} /* terminating entry */
};
MODULE_DEVICE_TABLE(usb, id_table);
@@ -2020,6 +2025,7 @@ static int mos7840_probe(struct usb_serial *serial,
const struct usb_device_id *id)
{
u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
+ u16 vid = le16_to_cpu(serial->dev->descriptor.idVendor);
u8 *buf;
int device_type;
@@ -2030,6 +2036,11 @@ static int mos7840_probe(struct usb_serial *serial,
goto out;
}
+ if (vid == USB_VENDOR_ID_MOXA && product == MOXA_DEVICE_ID_2210) {
+ device_type = MOSCHIP_DEVICE_ID_7820;
+ goto out;
+ }
+
buf = kzalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
if (!buf)
return -ENOMEM;
@@ -2279,11 +2290,6 @@ static int mos7840_port_probe(struct usb_serial_port *port)
goto error;
} else
dev_dbg(&port->dev, "ZLP_REG5 Writing success status%d\n", status);
-
- /* setting configuration feature to one */
- usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
- 0x03, 0x00, 0x01, 0x00, NULL, 0x00,
- MOS_WDR_TIMEOUT);
}
return 0;
error:
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 06ab016be0b6..e9491d400a24 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -197,6 +197,7 @@ static void option_instat_callback(struct urb *urb);
#define DELL_PRODUCT_5804_MINICARD_ATT 0x819b /* Novatel E371 */
#define DELL_PRODUCT_5821E 0x81d7
+#define DELL_PRODUCT_5821E_ESIM 0x81e0
#define KYOCERA_VENDOR_ID 0x0c88
#define KYOCERA_PRODUCT_KPC650 0x17da
@@ -1044,6 +1045,8 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5804_MINICARD_ATT, 0xff, 0xff, 0xff) },
{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5821E),
.driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
+ { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5821E_ESIM),
+ .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) }, /* ADU-E100, ADU-310 */
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },
@@ -1990,6 +1993,10 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x13) },
{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x14) },
{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x1b) },
+ { USB_DEVICE(0x0489, 0xe0b4), /* Foxconn T77W968 */
+ .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
+ { USB_DEVICE(0x0489, 0xe0b5), /* Foxconn T77W968 ESIM */
+ .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
{ USB_DEVICE(0x1508, 0x1001), /* Fibocom NL668 */
.driver_info = RSVD(4) | RSVD(5) | RSVD(6) },
{ USB_DEVICE(0x2cb7, 0x0104), /* Fibocom NL678 series */
diff --git a/drivers/usb/usbip/Kconfig b/drivers/usb/usbip/Kconfig
index 2f86b28fa3da..7bbae7a08642 100644
--- a/drivers/usb/usbip/Kconfig
+++ b/drivers/usb/usbip/Kconfig
@@ -4,6 +4,7 @@ config USBIP_CORE
tristate "USB/IP support"
depends on NET
select USB_COMMON
+ select SGL_ALLOC
---help---
This enables pushing USB packets over IP to allow remote
machines direct access to USB devices. It provides the
diff --git a/drivers/usb/usbip/stub_rx.c b/drivers/usb/usbip/stub_rx.c
index 66edfeea68fe..e2b019532234 100644
--- a/drivers/usb/usbip/stub_rx.c
+++ b/drivers/usb/usbip/stub_rx.c
@@ -470,18 +470,50 @@ static void stub_recv_cmd_submit(struct stub_device *sdev,
if (pipe == -1)
return;
+ /*
+ * Smatch reported the error case where use_sg is true and buf_len is 0.
+ * In this case, It adds SDEV_EVENT_ERROR_MALLOC and stub_priv will be
+ * released by stub event handler and connection will be shut down.
+ */
priv = stub_priv_alloc(sdev, pdu);
if (!priv)
return;
buf_len = (unsigned long long)pdu->u.cmd_submit.transfer_buffer_length;
+ if (use_sg && !buf_len) {
+ dev_err(&udev->dev, "sg buffer with zero length\n");
+ goto err_malloc;
+ }
+
/* allocate urb transfer buffer, if needed */
if (buf_len) {
if (use_sg) {
sgl = sgl_alloc(buf_len, GFP_KERNEL, &nents);
if (!sgl)
goto err_malloc;
+
+ /* Check if the server's HCD supports SG */
+ if (!udev->bus->sg_tablesize) {
+ /*
+ * If the server's HCD doesn't support SG, break
+ * a single SG request into several URBs and map
+ * each SG list entry to corresponding URB
+ * buffer. The previously allocated SG list is
+ * stored in priv->sgl (If the server's HCD
+ * support SG, SG list is stored only in
+ * urb->sg) and it is used as an indicator that
+ * the server split single SG request into
+ * several URBs. Later, priv->sgl is used by
+ * stub_complete() and stub_send_ret_submit() to
+ * reassemble the divied URBs.
+ */
+ support_sg = 0;
+ num_urbs = nents;
+ priv->completed_urbs = 0;
+ pdu->u.cmd_submit.transfer_flags &=
+ ~URB_DMA_MAP_SG;
+ }
} else {
buffer = kzalloc(buf_len, GFP_KERNEL);
if (!buffer)
@@ -489,24 +521,6 @@ static void stub_recv_cmd_submit(struct stub_device *sdev,
}
}
- /* Check if the server's HCD supports SG */
- if (use_sg && !udev->bus->sg_tablesize) {
- /*
- * If the server's HCD doesn't support SG, break a single SG
- * request into several URBs and map each SG list entry to
- * corresponding URB buffer. The previously allocated SG
- * list is stored in priv->sgl (If the server's HCD support SG,
- * SG list is stored only in urb->sg) and it is used as an
- * indicator that the server split single SG request into
- * several URBs. Later, priv->sgl is used by stub_complete() and
- * stub_send_ret_submit() to reassemble the divied URBs.
- */
- support_sg = 0;
- num_urbs = nents;
- priv->completed_urbs = 0;
- pdu->u.cmd_submit.transfer_flags &= ~URB_DMA_MAP_SG;
- }
-
/* allocate urb array */
priv->num_urbs = num_urbs;
priv->urbs = kmalloc_array(num_urbs, sizeof(*priv->urbs), GFP_KERNEL);
diff --git a/fs/exec.c b/fs/exec.c
index 555e93c7dec8..c27231234764 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1015,7 +1015,7 @@ static int exec_mmap(struct mm_struct *mm)
/* Notify parent that we're no longer interested in the old VM */
tsk = current;
old_mm = current->mm;
- mm_release(tsk, old_mm);
+ exec_mm_release(tsk, old_mm);
if (old_mm) {
sync_mm_rss(old_mm);
diff --git a/include/linux/compat.h b/include/linux/compat.h
index 16dafd9f4b86..c4c389c7e1b4 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -410,8 +410,6 @@ struct compat_kexec_segment;
struct compat_mq_attr;
struct compat_msgbuf;
-extern void compat_exit_robust_list(struct task_struct *curr);
-
#define BITS_PER_COMPAT_LONG (8*sizeof(compat_long_t))
#define BITS_TO_COMPAT_LONGS(bits) DIV_ROUND_UP(bits, BITS_PER_COMPAT_LONG)
diff --git a/include/linux/futex.h b/include/linux/futex.h
index ccaef0097785..5cc3fed27d4c 100644
--- a/include/linux/futex.h
+++ b/include/linux/futex.h
@@ -2,7 +2,9 @@
#ifndef _LINUX_FUTEX_H
#define _LINUX_FUTEX_H
+#include <linux/sched.h>
#include <linux/ktime.h>
+
#include <uapi/linux/futex.h>
struct inode;
@@ -48,15 +50,35 @@ union futex_key {
#define FUTEX_KEY_INIT (union futex_key) { .both = { .ptr = NULL } }
#ifdef CONFIG_FUTEX
-extern void exit_robust_list(struct task_struct *curr);
+enum {
+ FUTEX_STATE_OK,
+ FUTEX_STATE_EXITING,
+ FUTEX_STATE_DEAD,
+};
-long do_futex(u32 __user *uaddr, int op, u32 val, ktime_t *timeout,
- u32 __user *uaddr2, u32 val2, u32 val3);
-#else
-static inline void exit_robust_list(struct task_struct *curr)
+static inline void futex_init_task(struct task_struct *tsk)
{
+ tsk->robust_list = NULL;
+#ifdef CONFIG_COMPAT
+ tsk->compat_robust_list = NULL;
+#endif
+ INIT_LIST_HEAD(&tsk->pi_state_list);
+ tsk->pi_state_cache = NULL;
+ tsk->futex_state = FUTEX_STATE_OK;
+ mutex_init(&tsk->futex_exit_mutex);
}
+void futex_exit_recursive(struct task_struct *tsk);
+void futex_exit_release(struct task_struct *tsk);
+void futex_exec_release(struct task_struct *tsk);
+
+long do_futex(u32 __user *uaddr, int op, u32 val, ktime_t *timeout,
+ u32 __user *uaddr2, u32 val2, u32 val3);
+#else
+static inline void futex_init_task(struct task_struct *tsk) { }
+static inline void futex_exit_recursive(struct task_struct *tsk) { }
+static inline void futex_exit_release(struct task_struct *tsk) { }
+static inline void futex_exec_release(struct task_struct *tsk) { }
static inline long do_futex(u32 __user *uaddr, int op, u32 val,
ktime_t *timeout, u32 __user *uaddr2,
u32 val2, u32 val3)
@@ -65,12 +87,4 @@ static inline long do_futex(u32 __user *uaddr, int op, u32 val,
}
#endif
-#ifdef CONFIG_FUTEX_PI
-extern void exit_pi_state_list(struct task_struct *curr);
-#else
-static inline void exit_pi_state_list(struct task_struct *curr)
-{
-}
-#endif
-
#endif
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 67a1d86981a9..775503573ed7 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1054,6 +1054,8 @@ struct task_struct {
#endif
struct list_head pi_state_list;
struct futex_pi_state *pi_state_cache;
+ struct mutex futex_exit_mutex;
+ unsigned int futex_state;
#endif
#ifdef CONFIG_PERF_EVENTS
struct perf_event_context *perf_event_ctxp[perf_nr_task_contexts];
@@ -1442,7 +1444,6 @@ extern struct pid *cad_pid;
*/
#define PF_IDLE 0x00000002 /* I am an IDLE thread */
#define PF_EXITING 0x00000004 /* Getting shut down */
-#define PF_EXITPIDONE 0x00000008 /* PI exit done on shut down */
#define PF_VCPU 0x00000010 /* I'm a virtual CPU */
#define PF_WQ_WORKER 0x00000020 /* I'm a workqueue worker */
#define PF_FORKNOEXEC 0x00000040 /* Forked but didn't exec */
diff --git a/include/linux/sched/mm.h b/include/linux/sched/mm.h
index e6770012db18..c49257a3b510 100644
--- a/include/linux/sched/mm.h
+++ b/include/linux/sched/mm.h
@@ -117,8 +117,10 @@ extern struct mm_struct *get_task_mm(struct task_struct *task);
* succeeds.
*/
extern struct mm_struct *mm_access(struct task_struct *task, unsigned int mode);
-/* Remove the current tasks stale references to the old mm_struct */
-extern void mm_release(struct task_struct *, struct mm_struct *);
+/* Remove the current tasks stale references to the old mm_struct on exit() */
+extern void exit_mm_release(struct task_struct *, struct mm_struct *);
+/* Remove the current tasks stale references to the old mm_struct on exec() */
+extern void exec_mm_release(struct task_struct *, struct mm_struct *);
#ifdef CONFIG_MEMCG
extern void mm_update_next_owner(struct mm_struct *mm);
diff --git a/kernel/exit.c b/kernel/exit.c
index a46a50d67002..d351fd09e739 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -437,7 +437,7 @@ static void exit_mm(void)
struct mm_struct *mm = current->mm;
struct core_state *core_state;
- mm_release(current, mm);
+ exit_mm_release(current, mm);
if (!mm)
return;
sync_mm_rss(mm);
@@ -746,32 +746,12 @@ void __noreturn do_exit(long code)
*/
if (unlikely(tsk->flags & PF_EXITING)) {
pr_alert("Fixing recursive fault but reboot is needed!\n");
- /*
- * We can do this unlocked here. The futex code uses
- * this flag just to verify whether the pi state
- * cleanup has been done or not. In the worst case it
- * loops once more. We pretend that the cleanup was
- * done as there is no way to return. Either the
- * OWNER_DIED bit is set by now or we push the blocked
- * task into the wait for ever nirwana as well.
- */
- tsk->flags |= PF_EXITPIDONE;
+ futex_exit_recursive(tsk);
set_current_state(TASK_UNINTERRUPTIBLE);
schedule();
}
exit_signals(tsk); /* sets PF_EXITING */
- /*
- * Ensure that all new tsk->pi_lock acquisitions must observe
- * PF_EXITING. Serializes against futex.c:attach_to_pi_owner().
- */
- smp_mb();
- /*
- * Ensure that we must observe the pi_state in exit_mm() ->
- * mm_release() -> exit_pi_state_list().
- */
- raw_spin_lock_irq(&tsk->pi_lock);
- raw_spin_unlock_irq(&tsk->pi_lock);
if (unlikely(in_atomic())) {
pr_info("note: %s[%d] exited with preempt_count %d\n",
@@ -846,12 +826,6 @@ void __noreturn do_exit(long code)
* Make sure we are holding no locks:
*/
debug_check_no_locks_held();
- /*
- * We can do this unlocked here. The futex code uses this flag
- * just to verify whether the pi state cleanup has been done
- * or not. In the worst case it loops once more.
- */
- tsk->flags |= PF_EXITPIDONE;
if (tsk->io_context)
exit_io_context(tsk);
diff --git a/kernel/fork.c b/kernel/fork.c
index 13b38794efb5..6cabc124378c 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -1283,24 +1283,8 @@ static int wait_for_vfork_done(struct task_struct *child,
* restoring the old one. . .
* Eric Biederman 10 January 1998
*/
-void mm_release(struct task_struct *tsk, struct mm_struct *mm)
+static void mm_release(struct task_struct *tsk, struct mm_struct *mm)
{
- /* Get rid of any futexes when releasing the mm */
-#ifdef CONFIG_FUTEX
- if (unlikely(tsk->robust_list)) {
- exit_robust_list(tsk);
- tsk->robust_list = NULL;
- }
-#ifdef CONFIG_COMPAT
- if (unlikely(tsk->compat_robust_list)) {
- compat_exit_robust_list(tsk);
- tsk->compat_robust_list = NULL;
- }
-#endif
- if (unlikely(!list_empty(&tsk->pi_state_list)))
- exit_pi_state_list(tsk);
-#endif
-
uprobe_free_utask(tsk);
/* Get rid of any cached register state */
@@ -1333,6 +1317,18 @@ void mm_release(struct task_struct *tsk, struct mm_struct *mm)
complete_vfork_done(tsk);
}
+void exit_mm_release(struct task_struct *tsk, struct mm_struct *mm)
+{
+ futex_exit_release(tsk);
+ mm_release(tsk, mm);
+}
+
+void exec_mm_release(struct task_struct *tsk, struct mm_struct *mm)
+{
+ futex_exec_release(tsk);
+ mm_release(tsk, mm);
+}
+
/**
* dup_mm() - duplicates an existing mm structure
* @tsk: the task_struct with which the new mm will be associated.
@@ -2062,14 +2058,8 @@ static __latent_entropy struct task_struct *copy_process(
#ifdef CONFIG_BLOCK
p->plug = NULL;
#endif
-#ifdef CONFIG_FUTEX
- p->robust_list = NULL;
-#ifdef CONFIG_COMPAT
- p->compat_robust_list = NULL;
-#endif
- INIT_LIST_HEAD(&p->pi_state_list);
- p->pi_state_cache = NULL;
-#endif
+ futex_init_task(p);
+
/*
* sigaltstack should be cleared when sharing the same VM
*/
diff --git a/kernel/futex.c b/kernel/futex.c
index bd18f60e4c6c..afbf928d6a6b 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -325,6 +325,12 @@ static inline bool should_fail_futex(bool fshared)
}
#endif /* CONFIG_FAIL_FUTEX */
+#ifdef CONFIG_COMPAT
+static void compat_exit_robust_list(struct task_struct *curr);
+#else
+static inline void compat_exit_robust_list(struct task_struct *curr) { }
+#endif
+
static inline void futex_get_mm(union futex_key *key)
{
mmgrab(key->private.mm);
@@ -890,7 +896,7 @@ static void put_pi_state(struct futex_pi_state *pi_state)
* Kernel cleans up PI-state, but userspace is likely hosed.
* (Robust-futex cleanup is separate and might save the day for userspace.)
*/
-void exit_pi_state_list(struct task_struct *curr)
+static void exit_pi_state_list(struct task_struct *curr)
{
struct list_head *next, *head = &curr->pi_state_list;
struct futex_pi_state *pi_state;
@@ -960,7 +966,8 @@ void exit_pi_state_list(struct task_struct *curr)
}
raw_spin_unlock_irq(&curr->pi_lock);
}
-
+#else
+static inline void exit_pi_state_list(struct task_struct *curr) { }
#endif
/*
@@ -1169,16 +1176,47 @@ static int attach_to_pi_state(u32 __user *uaddr, u32 uval,
return ret;
}
+/**
+ * wait_for_owner_exiting - Block until the owner has exited
+ * @exiting: Pointer to the exiting task
+ *
+ * Caller must hold a refcount on @exiting.
+ */
+static void wait_for_owner_exiting(int ret, struct task_struct *exiting)
+{
+ if (ret != -EBUSY) {
+ WARN_ON_ONCE(exiting);
+ return;
+ }
+
+ if (WARN_ON_ONCE(ret == -EBUSY && !exiting))
+ return;
+
+ mutex_lock(&exiting->futex_exit_mutex);
+ /*
+ * No point in doing state checking here. If the waiter got here
+ * while the task was in exec()->exec_futex_release() then it can
+ * have any FUTEX_STATE_* value when the waiter has acquired the
+ * mutex. OK, if running, EXITING or DEAD if it reached exit()
+ * already. Highly unlikely and not a problem. Just one more round
+ * through the futex maze.
+ */
+ mutex_unlock(&exiting->futex_exit_mutex);
+
+ put_task_struct(exiting);
+}
+
static int handle_exit_race(u32 __user *uaddr, u32 uval,
struct task_struct *tsk)
{
u32 uval2;
/*
- * If PF_EXITPIDONE is not yet set, then try again.
+ * If the futex exit state is not yet FUTEX_STATE_DEAD, tell the
+ * caller that the alleged owner is busy.
*/
- if (tsk && !(tsk->flags & PF_EXITPIDONE))
- return -EAGAIN;
+ if (tsk && tsk->futex_state != FUTEX_STATE_DEAD)
+ return -EBUSY;
/*
* Reread the user space value to handle the following situation:
@@ -1196,8 +1234,9 @@ static int handle_exit_race(u32 __user *uaddr, u32 uval,
* *uaddr = 0xC0000000; tsk = get_task(PID);
* } if (!tsk->flags & PF_EXITING) {
* ... attach();
- * tsk->flags |= PF_EXITPIDONE; } else {
- * if (!(tsk->flags & PF_EXITPIDONE))
+ * tsk->futex_state = } else {
+ * FUTEX_STATE_DEAD; if (tsk->futex_state !=
+ * FUTEX_STATE_DEAD)
* return -EAGAIN;
* return -ESRCH; <--- FAIL
* }
@@ -1228,7 +1267,8 @@ static int handle_exit_race(u32 __user *uaddr, u32 uval,
* it after doing proper sanity checks.
*/
static int attach_to_pi_owner(u32 __user *uaddr, u32 uval, union futex_key *key,
- struct futex_pi_state **ps)
+ struct futex_pi_state **ps,
+ struct task_struct **exiting)
{
pid_t pid = uval & FUTEX_TID_MASK;
struct futex_pi_state *pi_state;
@@ -1253,22 +1293,33 @@ static int attach_to_pi_owner(u32 __user *uaddr, u32 uval, union futex_key *key,
}
/*
- * We need to look at the task state flags to figure out,
- * whether the task is exiting. To protect against the do_exit
- * change of the task flags, we do this protected by
- * p->pi_lock:
+ * We need to look at the task state to figure out, whether the
+ * task is exiting. To protect against the change of the task state
+ * in futex_exit_release(), we do this protected by p->pi_lock:
*/
raw_spin_lock_irq(&p->pi_lock);
- if (unlikely(p->flags & PF_EXITING)) {
+ if (unlikely(p->futex_state != FUTEX_STATE_OK)) {
/*
- * The task is on the way out. When PF_EXITPIDONE is
- * set, we know that the task has finished the
- * cleanup:
+ * The task is on the way out. When the futex state is
+ * FUTEX_STATE_DEAD, we know that the task has finished
+ * the cleanup:
*/
int ret = handle_exit_race(uaddr, uval, p);
raw_spin_unlock_irq(&p->pi_lock);
- put_task_struct(p);
+ /*
+ * If the owner task is between FUTEX_STATE_EXITING and
+ * FUTEX_STATE_DEAD then store the task pointer and keep
+ * the reference on the task struct. The calling code will
+ * drop all locks, wait for the task to reach
+ * FUTEX_STATE_DEAD and then drop the refcount. This is
+ * required to prevent a live lock when the current task
+ * preempted the exiting task between the two states.
+ */
+ if (ret == -EBUSY)
+ *exiting = p;
+ else
+ put_task_struct(p);
return ret;
}
@@ -1307,7 +1358,8 @@ static int attach_to_pi_owner(u32 __user *uaddr, u32 uval, union futex_key *key,
static int lookup_pi_state(u32 __user *uaddr, u32 uval,
struct futex_hash_bucket *hb,
- union futex_key *key, struct futex_pi_state **ps)
+ union futex_key *key, struct futex_pi_state **ps,
+ struct task_struct **exiting)
{
struct futex_q *top_waiter = futex_top_waiter(hb, key);
@@ -1322,7 +1374,7 @@ static int lookup_pi_state(u32 __user *uaddr, u32 uval,
* We are the first waiter - try to look up the owner based on
* @uval and attach to it.
*/
- return attach_to_pi_owner(uaddr, uval, key, ps);
+ return attach_to_pi_owner(uaddr, uval, key, ps, exiting);
}
static int lock_pi_update_atomic(u32 __user *uaddr, u32 uval, u32 newval)
@@ -1350,6 +1402,8 @@ static int lock_pi_update_atomic(u32 __user *uaddr, u32 uval, u32 newval)
* lookup
* @task: the task to perform the atomic lock work for. This will
* be "current" except in the case of requeue pi.
+ * @exiting: Pointer to store the task pointer of the owner task
+ * which is in the middle of exiting
* @set_waiters: force setting the FUTEX_WAITERS bit (1) or not (0)
*
* Return:
@@ -1358,11 +1412,17 @@ static int lock_pi_update_atomic(u32 __user *uaddr, u32 uval, u32 newval)
* - <0 - error
*
* The hb->lock and futex_key refs shall be held by the caller.
+ *
+ * @exiting is only set when the return value is -EBUSY. If so, this holds
+ * a refcount on the exiting task on return and the caller needs to drop it
+ * after waiting for the exit to complete.
*/
static int futex_lock_pi_atomic(u32 __user *uaddr, struct futex_hash_bucket *hb,
union futex_key *key,
struct futex_pi_state **ps,
- struct task_struct *task, int set_waiters)
+ struct task_struct *task,
+ struct task_struct **exiting,
+ int set_waiters)
{
u32 uval, newval, vpid = task_pid_vnr(task);
struct futex_q *top_waiter;
@@ -1432,7 +1492,7 @@ static int futex_lock_pi_atomic(u32 __user *uaddr, struct futex_hash_bucket *hb,
* attach to the owner. If that fails, no harm done, we only
* set the FUTEX_WAITERS bit in the user space variable.
*/
- return attach_to_pi_owner(uaddr, newval, key, ps);
+ return attach_to_pi_owner(uaddr, newval, key, ps, exiting);
}
/**
@@ -1850,6 +1910,8 @@ void requeue_pi_wake_futex(struct futex_q *q, union futex_key *key,
* @key1: the from futex key
* @key2: the to futex key
* @ps: address to store the pi_state pointer
+ * @exiting: Pointer to store the task pointer of the owner task
+ * which is in the middle of exiting
* @set_waiters: force setting the FUTEX_WAITERS bit (1) or not (0)
*
* Try and get the lock on behalf of the top waiter if we can do it atomically.
@@ -1857,16 +1919,20 @@ void requeue_pi_wake_futex(struct futex_q *q, union futex_key *key,
* then direct futex_lock_pi_atomic() to force setting the FUTEX_WAITERS bit.
* hb1 and hb2 must be held by the caller.
*
+ * @exiting is only set when the return value is -EBUSY. If so, this holds
+ * a refcount on the exiting task on return and the caller needs to drop it
+ * after waiting for the exit to complete.
+ *
* Return:
* - 0 - failed to acquire the lock atomically;
* - >0 - acquired the lock, return value is vpid of the top_waiter
* - <0 - error
*/
-static int futex_proxy_trylock_atomic(u32 __user *pifutex,
- struct futex_hash_bucket *hb1,
- struct futex_hash_bucket *hb2,
- union futex_key *key1, union futex_key *key2,
- struct futex_pi_state **ps, int set_waiters)
+static int
+futex_proxy_trylock_atomic(u32 __user *pifutex, struct futex_hash_bucket *hb1,
+ struct futex_hash_bucket *hb2, union futex_key *key1,
+ union futex_key *key2, struct futex_pi_state **ps,
+ struct task_struct **exiting, int set_waiters)
{
struct futex_q *top_waiter = NULL;
u32 curval;
@@ -1903,7 +1969,7 @@ static int futex_proxy_trylock_atomic(u32 __user *pifutex,
*/
vpid = task_pid_vnr(top_waiter->task);
ret = futex_lock_pi_atomic(pifutex, hb2, key2, ps, top_waiter->task,
- set_waiters);
+ exiting, set_waiters);
if (ret == 1) {
requeue_pi_wake_futex(top_waiter, key2, hb2);
return vpid;
@@ -2032,6 +2098,8 @@ static int futex_requeue(u32 __user *uaddr1, unsigned int flags,
}
if (requeue_pi && (task_count - nr_wake < nr_requeue)) {
+ struct task_struct *exiting = NULL;
+
/*
* Attempt to acquire uaddr2 and wake the top waiter. If we
* intend to requeue waiters, force setting the FUTEX_WAITERS
@@ -2039,7 +2107,8 @@ static int futex_requeue(u32 __user *uaddr1, unsigned int flags,
* faults rather in the requeue loop below.
*/
ret = futex_proxy_trylock_atomic(uaddr2, hb1, hb2, &key1,
- &key2, &pi_state, nr_requeue);
+ &key2, &pi_state,
+ &exiting, nr_requeue);
/*
* At this point the top_waiter has either taken uaddr2 or is
@@ -2066,7 +2135,8 @@ static int futex_requeue(u32 __user *uaddr1, unsigned int flags,
* If that call succeeds then we have pi_state and an
* initial refcount on it.
*/
- ret = lookup_pi_state(uaddr2, ret, hb2, &key2, &pi_state);
+ ret = lookup_pi_state(uaddr2, ret, hb2, &key2,
+ &pi_state, &exiting);
}
switch (ret) {
@@ -2084,17 +2154,24 @@ static int futex_requeue(u32 __user *uaddr1, unsigned int flags,
if (!ret)
goto retry;
goto out;
+ case -EBUSY:
case -EAGAIN:
/*
* Two reasons for this:
- * - Owner is exiting and we just wait for the
+ * - EBUSY: Owner is exiting and we just wait for the
* exit to complete.
- * - The user space value changed.
+ * - EAGAIN: The user space value changed.
*/
double_unlock_hb(hb1, hb2);
hb_waiters_dec(hb2);
put_futex_key(&key2);
put_futex_key(&key1);
+ /*
+ * Handle the case where the owner is in the middle of
+ * exiting. Wait for the exit to complete otherwise
+ * this task might loop forever, aka. live lock.
+ */
+ wait_for_owner_exiting(ret, exiting);
cond_resched();
goto retry;
default:
@@ -2801,6 +2878,7 @@ static int futex_lock_pi(u32 __user *uaddr, unsigned int flags,
{
struct hrtimer_sleeper timeout, *to;
struct futex_pi_state *pi_state = NULL;
+ struct task_struct *exiting = NULL;
struct rt_mutex_waiter rt_waiter;
struct futex_hash_bucket *hb;
struct futex_q q = futex_q_init;
@@ -2822,7 +2900,8 @@ static int futex_lock_pi(u32 __user *uaddr, unsigned int flags,
retry_private:
hb = queue_lock(&q);
- ret = futex_lock_pi_atomic(uaddr, hb, &q.key, &q.pi_state, current, 0);
+ ret = futex_lock_pi_atomic(uaddr, hb, &q.key, &q.pi_state, current,
+ &exiting, 0);
if (unlikely(ret)) {
/*
* Atomic work succeeded and we got the lock,
@@ -2835,15 +2914,22 @@ static int futex_lock_pi(u32 __user *uaddr, unsigned int flags,
goto out_unlock_put_key;
case -EFAULT:
goto uaddr_faulted;
+ case -EBUSY:
case -EAGAIN:
/*
* Two reasons for this:
- * - Task is exiting and we just wait for the
+ * - EBUSY: Task is exiting and we just wait for the
* exit to complete.
- * - The user space value changed.
+ * - EAGAIN: The user space value changed.
*/
queue_unlock(hb);
put_futex_key(&q.key);
+ /*
+ * Handle the case where the owner is in the middle of
+ * exiting. Wait for the exit to complete otherwise
+ * this task might loop forever, aka. live lock.
+ */
+ wait_for_owner_exiting(ret, exiting);
cond_resched();
goto retry;
default:
@@ -3452,11 +3538,16 @@ SYSCALL_DEFINE3(get_robust_list, int, pid,
return ret;
}
+/* Constants for the pending_op argument of handle_futex_death */
+#define HANDLE_DEATH_PENDING true
+#define HANDLE_DEATH_LIST false
+
/*
* Process a futex-list entry, check whether it's owned by the
* dying task, and do notification if so:
*/
-static int handle_futex_death(u32 __user *uaddr, struct task_struct *curr, int pi)
+static int handle_futex_death(u32 __user *uaddr, struct task_struct *curr,
+ bool pi, bool pending_op)
{
u32 uval, uninitialized_var(nval), mval;
int err;
@@ -3469,6 +3560,42 @@ static int handle_futex_death(u32 __user *uaddr, struct task_struct *curr, int p
if (get_user(uval, uaddr))
return -1;
+ /*
+ * Special case for regular (non PI) futexes. The unlock path in
+ * user space has two race scenarios:
+ *
+ * 1. The unlock path releases the user space futex value and
+ * before it can execute the futex() syscall to wake up
+ * waiters it is killed.
+ *
+ * 2. A woken up waiter is killed before it can acquire the
+ * futex in user space.
+ *
+ * In both cases the TID validation below prevents a wakeup of
+ * potential waiters which can cause these waiters to block
+ * forever.
+ *
+ * In both cases the following conditions are met:
+ *
+ * 1) task->robust_list->list_op_pending != NULL
+ * @pending_op == true
+ * 2) User space futex value == 0
+ * 3) Regular futex: @pi == false
+ *
+ * If these conditions are met, it is safe to attempt waking up a
+ * potential waiter without touching the user space futex value and
+ * trying to set the OWNER_DIED bit. The user space futex value is
+ * uncontended and the rest of the user space mutex state is
+ * consistent, so a woken waiter will just take over the
+ * uncontended futex. Setting the OWNER_DIED bit would create
+ * inconsistent state and malfunction of the user space owner died
+ * handling.
+ */
+ if (pending_op && !pi && !uval) {
+ futex_wake(uaddr, 1, 1, FUTEX_BITSET_MATCH_ANY);
+ return 0;
+ }
+
if ((uval & FUTEX_TID_MASK) != task_pid_vnr(curr))
return 0;
@@ -3547,7 +3674,7 @@ static inline int fetch_robust_entry(struct robust_list __user **entry,
*
* We silently return on any sign of list-walking problem.
*/
-void exit_robust_list(struct task_struct *curr)
+static void exit_robust_list(struct task_struct *curr)
{
struct robust_list_head __user *head = curr->robust_list;
struct robust_list __user *entry, *next_entry, *pending;
@@ -3588,10 +3715,11 @@ void exit_robust_list(struct task_struct *curr)
* A pending lock might already be on the list, so
* don't process it twice:
*/
- if (entry != pending)
+ if (entry != pending) {
if (handle_futex_death((void __user *)entry + futex_offset,
- curr, pi))
+ curr, pi, HANDLE_DEATH_LIST))
return;
+ }
if (rc)
return;
entry = next_entry;
@@ -3605,9 +3733,118 @@ void exit_robust_list(struct task_struct *curr)
cond_resched();
}
- if (pending)
+ if (pending) {
handle_futex_death((void __user *)pending + futex_offset,
- curr, pip);
+ curr, pip, HANDLE_DEATH_PENDING);
+ }
+}
+
+static void futex_cleanup(struct task_struct *tsk)
+{
+ if (unlikely(tsk->robust_list)) {
+ exit_robust_list(tsk);
+ tsk->robust_list = NULL;
+ }
+
+#ifdef CONFIG_COMPAT
+ if (unlikely(tsk->compat_robust_list)) {
+ compat_exit_robust_list(tsk);
+ tsk->compat_robust_list = NULL;
+ }
+#endif
+
+ if (unlikely(!list_empty(&tsk->pi_state_list)))
+ exit_pi_state_list(tsk);
+}
+
+/**
+ * futex_exit_recursive - Set the tasks futex state to FUTEX_STATE_DEAD
+ * @tsk: task to set the state on
+ *
+ * Set the futex exit state of the task lockless. The futex waiter code
+ * observes that state when a task is exiting and loops until the task has
+ * actually finished the futex cleanup. The worst case for this is that the
+ * waiter runs through the wait loop until the state becomes visible.
+ *
+ * This is called from the recursive fault handling path in do_exit().
+ *
+ * This is best effort. Either the futex exit code has run already or
+ * not. If the OWNER_DIED bit has been set on the futex then the waiter can
+ * take it over. If not, the problem is pushed back to user space. If the
+ * futex exit code did not run yet, then an already queued waiter might
+ * block forever, but there is nothing which can be done about that.
+ */
+void futex_exit_recursive(struct task_struct *tsk)
+{
+ /* If the state is FUTEX_STATE_EXITING then futex_exit_mutex is held */
+ if (tsk->futex_state == FUTEX_STATE_EXITING)
+ mutex_unlock(&tsk->futex_exit_mutex);
+ tsk->futex_state = FUTEX_STATE_DEAD;
+}
+
+static void futex_cleanup_begin(struct task_struct *tsk)
+{
+ /*
+ * Prevent various race issues against a concurrent incoming waiter
+ * including live locks by forcing the waiter to block on
+ * tsk->futex_exit_mutex when it observes FUTEX_STATE_EXITING in
+ * attach_to_pi_owner().
+ */
+ mutex_lock(&tsk->futex_exit_mutex);
+
+ /*
+ * Switch the state to FUTEX_STATE_EXITING under tsk->pi_lock.
+ *
+ * This ensures that all subsequent checks of tsk->futex_state in
+ * attach_to_pi_owner() must observe FUTEX_STATE_EXITING with
+ * tsk->pi_lock held.
+ *
+ * It guarantees also that a pi_state which was queued right before
+ * the state change under tsk->pi_lock by a concurrent waiter must
+ * be observed in exit_pi_state_list().
+ */
+ raw_spin_lock_irq(&tsk->pi_lock);
+ tsk->futex_state = FUTEX_STATE_EXITING;
+ raw_spin_unlock_irq(&tsk->pi_lock);
+}
+
+static void futex_cleanup_end(struct task_struct *tsk, int state)
+{
+ /*
+ * Lockless store. The only side effect is that an observer might
+ * take another loop until it becomes visible.
+ */
+ tsk->futex_state = state;
+ /*
+ * Drop the exit protection. This unblocks waiters which observed
+ * FUTEX_STATE_EXITING to reevaluate the state.
+ */
+ mutex_unlock(&tsk->futex_exit_mutex);
+}
+
+void futex_exec_release(struct task_struct *tsk)
+{
+ /*
+ * The state handling is done for consistency, but in the case of
+ * exec() there is no way to prevent futher damage as the PID stays
+ * the same. But for the unlikely and arguably buggy case that a
+ * futex is held on exec(), this provides at least as much state
+ * consistency protection which is possible.
+ */
+ futex_cleanup_begin(tsk);
+ futex_cleanup(tsk);
+ /*
+ * Reset the state to FUTEX_STATE_OK. The task is alive and about
+ * exec a new binary.
+ */
+ futex_cleanup_end(tsk, FUTEX_STATE_OK);
+}
+
+void futex_exit_release(struct task_struct *tsk)
+{
+ futex_cleanup_begin(tsk);
+ futex_cleanup(tsk);
+ futex_cleanup_end(tsk, FUTEX_STATE_DEAD);
}
long do_futex(u32 __user *uaddr, int op, u32 val, ktime_t *timeout,
@@ -3737,7 +3974,7 @@ static void __user *futex_uaddr(struct robust_list __user *entry,
*
* We silently return on any sign of list-walking problem.
*/
-void compat_exit_robust_list(struct task_struct *curr)
+static void compat_exit_robust_list(struct task_struct *curr)
{
struct compat_robust_list_head __user *head = curr->compat_robust_list;
struct robust_list __user *entry, *next_entry, *pending;
@@ -3784,7 +4021,8 @@ void compat_exit_robust_list(struct task_struct *curr)
if (entry != pending) {
void __user *uaddr = futex_uaddr(entry, futex_offset);
- if (handle_futex_death(uaddr, curr, pi))
+ if (handle_futex_death(uaddr, curr, pi,
+ HANDLE_DEATH_LIST))
return;
}
if (rc)
@@ -3803,7 +4041,7 @@ void compat_exit_robust_list(struct task_struct *curr)
if (pending) {
void __user *uaddr = futex_uaddr(pending, futex_offset);
- handle_futex_death(uaddr, curr, pip);
+ handle_futex_death(uaddr, curr, pip, HANDLE_DEATH_PENDING);
}
}
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 78bd2e3722c7..d14f6684737d 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -3454,26 +3454,6 @@ static int nvhdmi_chmap_validate(struct hdac_chmap *chmap,
return 0;
}
-/* map from pin NID to port; port is 0-based */
-/* for Nvidia: assume widget NID starting from 4, with step 1 (4, 5, 6, ...) */
-static int nvhdmi_pin2port(void *audio_ptr, int pin_nid)
-{
- return pin_nid - 4;
-}
-
-/* reverse-map from port to pin NID: see above */
-static int nvhdmi_port2pin(struct hda_codec *codec, int port)
-{
- return port + 4;
-}
-
-static const struct drm_audio_component_audio_ops nvhdmi_audio_ops = {
- .pin2port = nvhdmi_pin2port,
- .pin_eld_notify = generic_acomp_pin_eld_notify,
- .master_bind = generic_acomp_master_bind,
- .master_unbind = generic_acomp_master_unbind,
-};
-
static int patch_nvhdmi(struct hda_codec *codec)
{
struct hdmi_spec *spec;
@@ -3492,8 +3472,6 @@ static int patch_nvhdmi(struct hda_codec *codec)
codec->link_down_at_suspend = 1;
- generic_acomp_init(codec, &nvhdmi_audio_ops, nvhdmi_port2pin);
-
return 0;
}
diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index 45eee5cc312e..6cd4ff09c5ee 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -2930,6 +2930,9 @@ static int snd_usb_mixer_controls_badd(struct usb_mixer_interface *mixer,
continue;
iface = usb_ifnum_to_if(dev, intf);
+ if (!iface)
+ continue;
+
num = iface->num_altsetting;
if (num < 2)
diff --git a/sound/usb/mixer_scarlett_gen2.c b/sound/usb/mixer_scarlett_gen2.c
index 7d460b1f1735..94b903d95afa 100644
--- a/sound/usb/mixer_scarlett_gen2.c
+++ b/sound/usb/mixer_scarlett_gen2.c
@@ -261,34 +261,34 @@ static const struct scarlett2_device_info s6i6_gen2_info = {
},
.ports = {
- {
+ [SCARLETT2_PORT_TYPE_NONE] = {
.id = 0x000,
.num = { 1, 0, 8, 8, 8 },
.src_descr = "Off",
.src_num_offset = 0,
},
- {
+ [SCARLETT2_PORT_TYPE_ANALOGUE] = {
.id = 0x080,
.num = { 4, 4, 4, 4, 4 },
.src_descr = "Analogue %d",
.src_num_offset = 1,
.dst_descr = "Analogue Output %02d Playback"
},
- {
+ [SCARLETT2_PORT_TYPE_SPDIF] = {
.id = 0x180,
.num = { 2, 2, 2, 2, 2 },
.src_descr = "S/PDIF %d",
.src_num_offset = 1,
.dst_descr = "S/PDIF Output %d Playback"
},
- {
+ [SCARLETT2_PORT_TYPE_MIX] = {
.id = 0x300,
.num = { 10, 18, 18, 18, 18 },
.src_descr = "Mix %c",
.src_num_offset = 65,
.dst_descr = "Mixer Input %02d Capture"
},
- {
+ [SCARLETT2_PORT_TYPE_PCM] = {
.id = 0x600,
.num = { 6, 6, 6, 6, 6 },
.src_descr = "PCM %d",
@@ -317,44 +317,44 @@ static const struct scarlett2_device_info s18i8_gen2_info = {
},
.ports = {
- {
+ [SCARLETT2_PORT_TYPE_NONE] = {
.id = 0x000,
.num = { 1, 0, 8, 8, 4 },
.src_descr = "Off",
.src_num_offset = 0,
},
- {
+ [SCARLETT2_PORT_TYPE_ANALOGUE] = {
.id = 0x080,
.num = { 8, 6, 6, 6, 6 },
.src_descr = "Analogue %d",
.src_num_offset = 1,
.dst_descr = "Analogue Output %02d Playback"
},
- {
+ [SCARLETT2_PORT_TYPE_SPDIF] = {
+ .id = 0x180,
/* S/PDIF outputs aren't available at 192KHz
* but are included in the USB mux I/O
* assignment message anyway
*/
- .id = 0x180,
.num = { 2, 2, 2, 2, 2 },
.src_descr = "S/PDIF %d",
.src_num_offset = 1,
.dst_descr = "S/PDIF Output %d Playback"
},
- {
+ [SCARLETT2_PORT_TYPE_ADAT] = {
.id = 0x200,
.num = { 8, 0, 0, 0, 0 },
.src_descr = "ADAT %d",
.src_num_offset = 1,
},
- {
+ [SCARLETT2_PORT_TYPE_MIX] = {
.id = 0x300,
.num = { 10, 18, 18, 18, 18 },
.src_descr = "Mix %c",
.src_num_offset = 65,
.dst_descr = "Mixer Input %02d Capture"
},
- {
+ [SCARLETT2_PORT_TYPE_PCM] = {
.id = 0x600,
.num = { 20, 18, 18, 14, 10 },
.src_descr = "PCM %d",
@@ -387,20 +387,20 @@ static const struct scarlett2_device_info s18i20_gen2_info = {
},
.ports = {
- {
+ [SCARLETT2_PORT_TYPE_NONE] = {
.id = 0x000,
.num = { 1, 0, 8, 8, 6 },
.src_descr = "Off",
.src_num_offset = 0,
},
- {
+ [SCARLETT2_PORT_TYPE_ANALOGUE] = {
.id = 0x080,
.num = { 8, 10, 10, 10, 10 },
.src_descr = "Analogue %d",
.src_num_offset = 1,
.dst_descr = "Analogue Output %02d Playback"
},
- {
+ [SCARLETT2_PORT_TYPE_SPDIF] = {
/* S/PDIF outputs aren't available at 192KHz
* but are included in the USB mux I/O
* assignment message anyway
@@ -411,21 +411,21 @@ static const struct scarlett2_device_info s18i20_gen2_info = {
.src_num_offset = 1,
.dst_descr = "S/PDIF Output %d Playback"
},
- {
+ [SCARLETT2_PORT_TYPE_ADAT] = {
.id = 0x200,
.num = { 8, 8, 8, 4, 0 },
.src_descr = "ADAT %d",
.src_num_offset = 1,
.dst_descr = "ADAT Output %d Playback"
},
- {
+ [SCARLETT2_PORT_TYPE_MIX] = {
.id = 0x300,
.num = { 10, 18, 18, 18, 18 },
.src_descr = "Mix %c",
.src_num_offset = 65,
.dst_descr = "Mixer Input %02d Capture"
},
- {
+ [SCARLETT2_PORT_TYPE_PCM] = {
.id = 0x600,
.num = { 20, 18, 18, 14, 10 },
.src_descr = "PCM %d",
diff --git a/tools/arch/x86/tools/gen-insn-attr-x86.awk b/tools/arch/x86/tools/gen-insn-attr-x86.awk
index b02a36b2c14f..a42015b305f4 100644
--- a/tools/arch/x86/tools/gen-insn-attr-x86.awk
+++ b/tools/arch/x86/tools/gen-insn-attr-x86.awk
@@ -69,7 +69,7 @@ BEGIN {
lprefix1_expr = "\\((66|!F3)\\)"
lprefix2_expr = "\\(F3\\)"
- lprefix3_expr = "\\((F2|!F3|66\\&F2)\\)"
+ lprefix3_expr = "\\((F2|!F3|66&F2)\\)"
lprefix_expr = "\\((66|F2|F3)\\)"
max_lprefix = 4
@@ -257,7 +257,7 @@ function convert_operands(count,opnd, i,j,imm,mod)
return add_flags(imm, mod)
}
-/^[0-9a-f]+\:/ {
+/^[0-9a-f]+:/ {
if (NR == 1)
next
# get index
diff --git a/tools/testing/selftests/x86/mov_ss_trap.c b/tools/testing/selftests/x86/mov_ss_trap.c
index 3c3a022654f3..6da0ac3f0135 100644
--- a/tools/testing/selftests/x86/mov_ss_trap.c
+++ b/tools/testing/selftests/x86/mov_ss_trap.c
@@ -257,7 +257,8 @@ int main()
err(1, "sigaltstack");
sethandler(SIGSEGV, handle_and_longjmp, SA_RESETHAND | SA_ONSTACK);
nr = SYS_getpid;
- asm volatile ("mov %[ss], %%ss; SYSENTER" : "+a" (nr)
+ /* Clear EBP first to make sure we segfault cleanly. */
+ asm volatile ("xorl %%ebp, %%ebp; mov %[ss], %%ss; SYSENTER" : "+a" (nr)
: [ss] "m" (ss) : "flags", "rcx"
#ifdef __x86_64__
, "r11"
diff --git a/tools/testing/selftests/x86/sigreturn.c b/tools/testing/selftests/x86/sigreturn.c
index 3e49a7873f3e..57c4f67f16ef 100644
--- a/tools/testing/selftests/x86/sigreturn.c
+++ b/tools/testing/selftests/x86/sigreturn.c
@@ -451,6 +451,19 @@ static void sigusr1(int sig, siginfo_t *info, void *ctx_void)
ctx->uc_mcontext.gregs[REG_SP] = (unsigned long)0x8badf00d5aadc0deULL;
ctx->uc_mcontext.gregs[REG_CX] = 0;
+#ifdef __i386__
+ /*
+ * Make sure the kernel doesn't inadvertently use DS or ES-relative
+ * accesses in a region where user DS or ES is loaded.
+ *
+ * Skip this for 64-bit builds because long mode doesn't care about
+ * DS and ES and skipping it increases test coverage a little bit,
+ * since 64-bit kernels can still run the 32-bit build.
+ */
+ ctx->uc_mcontext.gregs[REG_DS] = 0;
+ ctx->uc_mcontext.gregs[REG_ES] = 0;
+#endif
+
memcpy(&requested_regs, &ctx->uc_mcontext.gregs, sizeof(gregset_t));
requested_regs[REG_CX] = *ssptr(ctx); /* The asm code does this. */
diff --git a/tools/usb/usbip/libsrc/usbip_host_common.c b/tools/usb/usbip/libsrc/usbip_host_common.c
index 2813aa821c82..d1d8ba2a4a40 100644
--- a/tools/usb/usbip/libsrc/usbip_host_common.c
+++ b/tools/usb/usbip/libsrc/usbip_host_common.c
@@ -57,7 +57,7 @@ static int32_t read_attr_usbip_status(struct usbip_usb_device *udev)
}
value = atoi(status);
-
+ close(fd);
return value;
}
Powered by blists - more mailing lists