[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191202233127.31160-2-ray.jui@broadcom.com>
Date: Mon, 2 Dec 2019 15:31:26 -0800
From: Ray Jui <ray.jui@...adcom.com>
To: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
bcm-kernel-feedback-list@...adcom.com,
Rayagonda Kokatanur <rayagonda.kokatanur@...adcom.com>,
Ray Jui <ray.jui@...adcom.com>
Subject: [PATCH 1/2] dt-bindings: soc: Add binding doc for iProc IDM device
Add binding document for iProc based IDM devices.
Signed-off-by: Ray Jui <ray.jui@...adcom.com>
---
.../bindings/soc/bcm/brcm,iproc-idm.txt | 44 +++++++++++++++++++
1 file changed, 44 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,iproc-idm.txt
diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,iproc-idm.txt b/Documentation/devicetree/bindings/soc/bcm/brcm,iproc-idm.txt
new file mode 100644
index 000000000000..388c6b036d7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/bcm/brcm,iproc-idm.txt
@@ -0,0 +1,44 @@
+Broadcom iProc Interconnect Device Management (IDM) device
+
+The Broadcom iProc IDM device allows control and monitoring of ASIC internal
+bus transactions. Most importantly, it can be configured to detect bus
+transaction timeout. In such case, critical information such as transaction
+address that caused the error, bus master ID of the transaction that caused
+the error, and etc., are made available from the IDM device.
+
+-------------------------------------------------------------------------------
+
+Required properties for IDM device node:
+- compatible: must be "brcm,iproc-idm"
+- reg: base address and length of the IDM register space
+- interrupt: IDM interrupt number
+- brcm,iproc-idm-bus: IDM bus string
+
+Optional properties for IDM device node:
+- brcm,iproc-idm-elog: phandle to the device node of the IDM logging device
+
+-------------------------------------------------------------------------------
+
+Required properties for IDM error logging device node:
+- compatible: must be "brcm,iproc-idm-elog";
+- reg: base address and length of reserved memory location where IDM error
+ events can be saved
+
+-------------------------------------------------------------------------------
+
+Example:
+
+idm {
+ idm-elog {
+ compatible = "brcm,iproc-idm-elog";
+ reg = <0x8f221000 0x1000>;
+ };
+
+ idm-mhb-paxc-axi {
+ compatible = "brcm,iproc-idm";
+ reg = <0x60406900 0x200>;
+ interrupt = <GIC_SPI 516 IRQ_TYPE_LEVEL_HIGH>;
+ brcm,iproc-idm-bus = "idm-mhb-paxc-axi";
+ brcm,iproc-idm-elog = <&idm-elog>;
+ };
+};
--
2.17.1
Powered by blists - more mailing lists