linux-kernel - [PATCH 5.3 095/135] iavf: initialize ITRN registers with correct values

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20191203213037.584629529@linuxfoundation.org>
Date:   Tue,  3 Dec 2019 23:35:35 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org,
        Nicholas Nunley <nicholas.d.nunley@...el.com>,
        Andrew Bowers <andrewx.bowers@...el.com>,
        Jeff Kirsher <jeffrey.t.kirsher@...el.com>,
        Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.3 095/135] iavf: initialize ITRN registers with correct values

From: Nicholas Nunley <nicholas.d.nunley@...el.com>

[ Upstream commit 4eda4e0096842764d725bcfd77471a419832b074 ]

Since commit 92418fb14750 ("i40e/i40evf: Use usec value instead of reg
value for ITR defines") the driver tracks the interrupt throttling
intervals in single usec units, although the actual ITRN registers are
programmed in 2 usec units. Most register programming flows in the driver
correctly handle the conversion, although it is currently not applied when
the registers are initialized to their default values. Most of the time
this doesn't present a problem since the default values are usually
immediately overwritten through the standard adaptive throttling mechanism,
or updated manually by the user, but if adaptive throttling is disabled and
the interval values are left alone then the incorrect value will persist.

Since the intended default interval of 50 usecs (vs. 100 usecs as
programmed) performs better for most traffic workloads, this can lead to
performance regressions.

This patch adds the correct conversion when writing the initial values to
the ITRN registers.

Signed-off-by: Nicholas Nunley <nicholas.d.nunley@...el.com>
Tested-by: Andrew Bowers <andrewx.bowers@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 drivers/net/ethernet/intel/iavf/iavf_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c
index 9d2b50964a08f..fa857b60ba2b6 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_main.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_main.c
@@ -336,7 +336,7 @@ iavf_map_vector_to_rxq(struct iavf_adapter *adapter, int v_idx, int r_idx)
 	q_vector->rx.target_itr = ITR_TO_REG(rx_ring->itr_setting);
 	q_vector->ring_mask |= BIT(r_idx);
 	wr32(hw, IAVF_VFINT_ITRN1(IAVF_RX_ITR, q_vector->reg_idx),
-	     q_vector->rx.current_itr);
+	     q_vector->rx.current_itr >> 1);
 	q_vector->rx.current_itr = q_vector->rx.target_itr;
 }

@@ -362,7 +362,7 @@ iavf_map_vector_to_txq(struct iavf_adapter *adapter, int v_idx, int t_idx)
 	q_vector->tx.target_itr = ITR_TO_REG(tx_ring->itr_setting);
 	q_vector->num_ringpairs++;
 	wr32(hw, IAVF_VFINT_ITRN1(IAVF_TX_ITR, q_vector->reg_idx),
-	     q_vector->tx.target_itr);
+	     q_vector->tx.target_itr >> 1);
 	q_vector->tx.current_itr = q_vector->tx.target_itr;
 }

-- 
2.20.1