[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191203223433.182056324@linuxfoundation.org>
Date: Tue, 3 Dec 2019 23:33:02 +0100
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Johan Hovold <johan@...nel.org>,
Ladislav Michl <ladis@...ux-mips.org>,
Peter Ujfalusi <peter.ujfalusi@...com>,
Roger Quadros <rogerq@...com>,
Tony Lindgren <tony@...mide.com>,
Alan Stern <stern@...land.harvard.edu>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 4.19 116/321] usb: ehci-omap: Fix deferred probe for phy handling
From: Roger Quadros <rogerq@...com>
[ Upstream commit 8dc7623bf608495b6e6743e805807c7840673573 ]
PHY model is being used on omap5 platforms even if port mode
is not OMAP_EHCI_PORT_MODE_PHY. So don't guess if PHY is required
or not based on PHY mode.
If PHY is provided in device tree, it must be required. So, if
devm_usb_get_phy_by_phandle() gives us an error code other
than -ENODEV (no PHY) then error out.
This fixes USB Ethernet on omap5-uevm if PHY happens to
probe after EHCI thus causing a -EPROBE_DEFER.
Cc: Johan Hovold <johan@...nel.org>
Cc: Ladislav Michl <ladis@...ux-mips.org>
Reported-by: Peter Ujfalusi <peter.ujfalusi@...com>
Signed-off-by: Roger Quadros <rogerq@...com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@...com>
Acked-by: Tony Lindgren <tony@...mide.com>
Acked-by: Alan Stern <stern@...land.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/usb/host/ehci-omap.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 7e4c13346a1ee..7d20296cbe9f9 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -159,11 +159,12 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
/* get the PHY device */
phy = devm_usb_get_phy_by_phandle(dev, "phys", i);
if (IS_ERR(phy)) {
- /* Don't bail out if PHY is not absolutely necessary */
- if (pdata->port_mode[i] != OMAP_EHCI_PORT_MODE_PHY)
+ ret = PTR_ERR(phy);
+ if (ret == -ENODEV) { /* no PHY */
+ phy = NULL;
continue;
+ }
- ret = PTR_ERR(phy);
if (ret != -EPROBE_DEFER)
dev_err(dev, "Can't get PHY for port %d: %d\n",
i, ret);
--
2.20.1
Powered by blists - more mailing lists