lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20191203144948.15137-1-tudor.ambarus@microchip.com>
Date:   Tue, 3 Dec 2019 14:50:01 +0000
From:   <Tudor.Ambarus@...rochip.com>
To:     <john.garry@...wei.com>, <vigneshr@...com>, <richard@....at>,
        <miquel.raynal@...tlin.com>
CC:     <linux-mtd@...ts.infradead.org>, <linux-kernel@...r.kernel.org>,
        <Tudor.Ambarus@...rochip.com>
Subject: [PATCH v2] mtd: spi-nor: Fix the writing of the Status Register on
 micron flashes

From: Tudor Ambarus <tudor.ambarus@...rochip.com>

Micron flashes do not support 16 bit writes on the Status Register.
According to micron datasheets, when using the Write Status Register
(01h) command, the chip select should be driven LOW and held LOW until
the eighth bit of the last data byte has been latched in, after which
it must be driven HIGH. If CS is not driven HIGH, the command is not
executed, flag status register error bits are not set, and the write enable
latch remains set to 1. This fixes the lock operations on micron flashes.

Reported-by: John Garry <john.garry@...wei.com>
Fixes: 39d1e3340c73 ("mtd: spi-nor: Fix clearing of QE bit on lock()/unlock()")
Signed-off-by: Tudor Ambarus <tudor.ambarus@...rochip.com>
---
v2: reword commit subject

 drivers/mtd/spi-nor/spi-nor.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index f1490c7b5cb9..7e41493f69d8 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -4607,6 +4607,7 @@ static void sst_set_default_init(struct spi_nor *nor)
 static void st_micron_set_default_init(struct spi_nor *nor)
 {
 	nor->flags |= SNOR_F_HAS_LOCK;
+	nor->flags &= ~SNOR_F_HAS_16BIT_SR;
 	nor->params.quad_enable = NULL;
 	nor->params.set_4byte = st_micron_set_4byte;
 }
-- 
2.14.5

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ