| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <AM5PR04MB3299BFC34A4666B7A9C12B13F55D0@AM5PR04MB3299.eurprd04.prod.outlook.com>
Date: Wed, 4 Dec 2019 04:34:32 +0000
From: Xiaowei Bao <xiaowei.bao@....com>
To: Robin Murphy <robin.murphy@....com>, Marc Zyngier <maz@...nel.org>
CC: Roy Zang <roy.zang@....com>,
"lorenzo.pieralisi@....com" <lorenzo.pieralisi@....com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
"Z.q. Hou" <zhiqiang.hou@....com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"M.h. Lian" <minghuan.lian@....com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"bhelgaas@...gle.com" <bhelgaas@...gle.com>,
"andrew.murray@....com" <andrew.murray@....com>,
"frowand.list@...il.com" <frowand.list@...il.com>,
Mingkai Hu <mingkai.hu@....com>
Subject: RE: [PATCH] PCI: layerscape: Add the SRIOV support in host side
> -----Original Message-----
> From: Robin Murphy <robin.murphy@....com>
> Sent: 2019年12月3日 23:20
> To: Marc Zyngier <maz@...nel.org>; Xiaowei Bao <xiaowei.bao@....com>
> Cc: Roy Zang <roy.zang@....com>; lorenzo.pieralisi@....com;
> devicetree@...r.kernel.org; linux-pci@...r.kernel.org; Z.q. Hou
> <zhiqiang.hou@....com>; linux-kernel@...r.kernel.org; M.h. Lian
> <minghuan.lian@....com>; robh+dt@...nel.org;
> linux-arm-kernel@...ts.infradead.org; bhelgaas@...gle.com;
> andrew.murray@....com; frowand.list@...il.com; Mingkai Hu
> <mingkai.hu@....com>
> Subject: Re: [PATCH] PCI: layerscape: Add the SRIOV support in host side
>
> On 03/12/2019 11:51 am, Marc Zyngier wrote:
> > On 2019-12-03 01:42, Xiaowei Bao wrote:
> >>> -----Original Message-----
> >>> From: Marc Zyngier <maz@...terjones.org>
> >>> Sent: 2019年12月2日 20:48
> >>> To: Xiaowei Bao <xiaowei.bao@....com>
> >>> Cc: robh+dt@...nel.org; frowand.list@...il.com; M.h. Lian
> >>> <minghuan.lian@....com>; Mingkai Hu <mingkai.hu@....com>; Roy
> Zang
> >>> <roy.zang@....com>; lorenzo.pieralisi@....com;
> >>> andrew.murray@....com; bhelgaas@...gle.com;
> >>> devicetree@...r.kernel.org; linux-kernel@...r.kernel.org;
> >>> linux-pci@...r.kernel.org; linux-arm-kernel@...ts.infradead.org;
> >>> Z.q. Hou <zhiqiang.hou@....com>
> >>> Subject: Re: [PATCH] PCI: layerscape: Add the SRIOV support in host
> >>> side
> >>>
> >>> On 2019-12-02 10:45, Xiaowei Bao wrote:
> >>> > GIC get the map relations of devid and stream id from the msi-map
> >>> > property of DTS, our platform add this property in u-boot base on
> >>> > the PCIe device in the bus, but if enable the vf device in kernel,
> >>> > the vf device msi-map will not set, so the vf device can't work,
> >>> > this patch purpose is that manage the stream id and device id map
> >>> > relations dynamically in kernel, and make the new PCIe device work in
> kernel.
> >>> >
> >>> > Signed-off-by: Xiaowei Bao <xiaowei.bao@....com>
> >>> > ---
> >>> > drivers/of/irq.c | 9 +++
> >>> > drivers/pci/controller/dwc/pci-layerscape.c | 94
> >>> > +++++++++++++++++++++++++++++
> >>> > drivers/pci/probe.c | 6 ++
> >>> > drivers/pci/remove.c | 6 ++
> >>> > 4 files changed, 115 insertions(+)
> >>> >
> >>> > diff --git a/drivers/of/irq.c b/drivers/of/irq.c index
> >>> > a296eaf..791e609 100644
> >>> > --- a/drivers/of/irq.c
> >>> > +++ b/drivers/of/irq.c
> >>> > @@ -576,6 +576,11 @@ void __init of_irq_init(const struct
> >>> >of_device_id
> >>> > *matches)
> >>> > }
> >>> > }
> >>> >
> >>> > +u32 __weak ls_pcie_streamid_fix(struct device *dev, u32 rid) {
> >>> > + return rid;
> >>> > +}
> >>> > +
> >>> > static u32 __of_msi_map_rid(struct device *dev, struct
> >>> >device_node **np,
> >>> > u32 rid_in)
> >>> > {
> >>> > @@ -590,6 +595,10 @@ static u32 __of_msi_map_rid(struct device
> >>> >*dev, struct device_node **np,
> >>> > if (!of_map_rid(parent_dev->of_node, rid_in, "msi-map",
> >>> > "msi-map-mask", np, &rid_out))
> >>> > break;
> >>> > +
> >>> > + if (rid_out == rid_in)
> >>> > + rid_out = ls_pcie_streamid_fix(parent_dev, rid_in);
> >>>
> >>> Over my dead body. Get your firmware to properly program the LUT so
> >>> that it presents the ITS with a reasonable topology. There is
> >>> absolutely no way this kind of change makes it into the kernel.
> >>
> >> Sorry for this, I know it is not reasonable, but I have no other way,
> >> as I know, ARM get the mapping of stream ID to request ID from the
> >> msi-map property of DTS, if add a new device which need the stream ID
> >> and try to get it from the msi-map of DTS, it will failed and not
> >> work, yes? So could you give me a better advice to fix this issue, I
> >> would really appreciate any comments or suggestions, thanks a lot.
> >
> > Why can't firmware expose an msi-map/msi-map-mask that has a large
> > enough range to ensure mapping of VFs? What are the limitations of the
> > LUT that would prevent this from being configured before the kernel
> > boots?
Thanks for your comments, yes, this is the root cause, we only have 16 stream
IDs for PCIe domain, this is the hardware limitation, if there have enough stream
IDs, we can expose an msi-map/msi-map-mask for all PCIe devices in system,
unfortunately, the stream IDs is not enough, I think other ARM vendor have same
issue that they don't have enough stream IDs.
Thanks
Xiaowei
>
> Furthermore, note that this attempt isn't doing anything for the SMMU
> Stream IDs, so the moment anyone tries to assign those VFs they're still going
> to go bang anyway. Any firmware-based fixup for ID mappings, config space
> addresses, etc. needs to be SR-IOV-aware and account for all *possible*
> BDFs.
>
> On LS2085 at least, IIRC you can configure a single LUT entry to just translate
> the Bus:Device identifier and pass some or all of the Function bits straight
> through as the LSBs of the Stream ID, so I don't believe the relatively limited
> number of LUT registers should be too much of an issue. For example, last
> time I hacked on that I apparently had it set up statically like this:
>
> &pcie3 {
> /* Squash 8:5:3 BDF down to 2:2:3 */
> msi-map-mask = <0x031f>;
> msi-map = <0x000 &its 0x00 0x20>,
> <0x100 &its 0x20 0x20>,
> <0x200 &its 0x40 0x20>,
> <0x300 &its 0x60 0x20>;
> };
Thanks Robin, this is a effective way, but we only have total 16 stream IDs for PCIe domain,
and only assign 4 stream IDs for each PCIe controller if the board have 4 PCIe controllers,
this is the root cause, I submitted this patch to dynamically manage these stream IDs,
so that it looks like each PCIe controller has 16 stream IDs. I can dynamically allocate and
release these stream IDs based on the PCIe devices in the current system. If use your method,
we support up to 4 PCIe devices(2 PFs and 2 VFs), it will not achieve our purpose.
Thanks
Xiaowei
>
> Robin.
Powered by blists - more mailing lists