[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAHLCerPyJxsLs5at4dQ7GdDXpC85UijNNhJbKSoDsdLW2do00w@mail.gmail.com>
Date: Wed, 4 Dec 2019 15:08:41 +0530
From: Amit Kucheria <amit.kucheria@...durent.com>
To: Florian Fainelli <f.fainelli@...il.com>
Cc: LKML <linux-kernel@...r.kernel.org>,
Markus Mayer <mmayer@...adcom.com>,
"maintainer:BROADCOM STB AVS TMON DRIVER"
<bcm-kernel-feedback-list@...adcom.com>,
Zhang Rui <rui.zhang@...el.com>,
Eduardo Valentin <edubezval@...il.com>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
"open list:BROADCOM STB AVS TMON DRIVER" <linux-pm@...r.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
"moderated list:BROADCOM BCM7XXX ARM ARCHITECTURE"
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH 6/6] thermal: brcmstb_thermal: Register different ops per process
On Wed, Oct 30, 2019 at 11:52 PM Florian Fainelli <f.fainelli@...il.com> wrote:
>
> Since we do not have interrupts on BCM7216, we cannot have trip point
> crossing, the thermal subsystem expects us to provide a NULL set_trips
> operation in that case, so make it possible to provide per-process
> thermal_zone_of_device_ops
>
> Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
Reviewed-by: Amit Kucheria <amit.kucheria@...aro.org>
> ---
> drivers/thermal/broadcom/brcmstb_thermal.c | 13 ++++++++++---
> 1 file changed, 10 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/thermal/broadcom/brcmstb_thermal.c b/drivers/thermal/broadcom/brcmstb_thermal.c
> index 64f715053ce9..a75a335d1bb3 100644
> --- a/drivers/thermal/broadcom/brcmstb_thermal.c
> +++ b/drivers/thermal/broadcom/brcmstb_thermal.c
> @@ -96,6 +96,7 @@ static struct avs_tmon_trip avs_tmon_trips[] = {
> struct brcmstb_thermal_params {
> unsigned int offset;
> unsigned int mult;
> + const struct thermal_zone_of_device_ops *of_ops;
> };
>
> struct brcmstb_thermal_priv {
> @@ -278,19 +279,25 @@ static int brcmstb_set_trips(void *data, int low, int high)
> return 0;
> }
>
> -static const struct thermal_zone_of_device_ops of_ops = {
> +static const struct thermal_zone_of_device_ops brcmstb_16nm_of_ops = {
> .get_temp = brcmstb_get_temp,
> - .set_trips = brcmstb_set_trips,
> };
>
> static const struct brcmstb_thermal_params brcmstb_16nm_params = {
> .offset = 457829,
> .mult = 557,
> + .of_ops = &brcmstb_16nm_of_ops,
> +};
> +
> +static const struct thermal_zone_of_device_ops brcmstb_28nm_of_ops = {
> + .get_temp = brcmstb_get_temp,
> + .set_trips = brcmstb_set_trips,
> };
>
> static const struct brcmstb_thermal_params brcmstb_28nm_params = {
> .offset = 410040,
> .mult = 487,
> + .of_ops = &brcmstb_28nm_of_ops,
> };
>
> static const struct of_device_id brcmstb_thermal_id_table[] = {
> @@ -329,7 +336,7 @@ static int brcmstb_thermal_probe(struct platform_device *pdev)
> platform_set_drvdata(pdev, priv);
>
> thermal = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, priv,
> - &of_ops);
> + priv->temp_params.of_ops);
> if (IS_ERR(thermal)) {
> ret = PTR_ERR(thermal);
> dev_err(&pdev->dev, "could not register sensor: %d\n", ret);
> --
> 2.17.1
>
Powered by blists - more mailing lists