| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1575457098-18368-6-git-send-email-Ashish.Kumar@nxp.com>
Date: Wed, 4 Dec 2019 16:28:18 +0530
From: Ashish Kumar <Ashish.Kumar@....com>
To: devicetree@...r.kernel.org, robh@...nel.org, mark.rutland@....com,
shawnguo@...nel.org
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Ashish Kumar <Ashish.Kumar@....com>,
Kuldeep Singh <kuldeep.singh@....com>
Subject: [Patch v2 5/5] arm64: dts: ls1088a: Add QSPI support for NXP LS1088
Add QSPI node in dtsi(ls1088a), and dts(ls1088ardb, ls1088aqds) boards.
Both ls1088ardb and ls1088aqds has two 64MB flash from SPANSION(s25fs512s).
QUAD I/O is tested in case of read and single I/O is tested in case of
write.
Signed-off-by: Kuldeep Singh <kuldeep.singh@....com>
Signed-off-by: Ashish Kumar <Ashish.Kumar@....com>
---
v2:
Rebased to top
Reword commit message
.../boot/dts/freescale/fsl-ls1088a-qds.dts | 24 +++++++++++++++++++
.../boot/dts/freescale/fsl-ls1088a-rdb.dts | 24 +++++++++++++++++++
.../arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 13 ++++++++++
3 files changed, 61 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
index 120e62dad154..41d8b15f25a5 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
@@ -143,6 +143,30 @@
status = "okay";
};
+&qspi {
+ status = "okay";
+
+ s25fs512s0: flash@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
+ reg = <0>;
+ };
+
+ s25fs512s1: flash@1 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
+ reg = <1>;
+ };
+};
+
&sata {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 90b198939251..4d77b345cebd 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -86,6 +86,30 @@
status = "okay";
};
+&qspi {
+ status = "okay";
+
+ s25fs512s0: flash@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
+ reg = <0>;
+ };
+
+ s25fs512s1: flash@1 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
+ reg = <1>;
+ };
+};
+
&sata {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index c676d0771762..594566265e3d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -375,6 +375,19 @@
status = "disabled";
};
+ qspi: spi@...0000 {
+ compatible = "fsl,ls2080a-qspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x20c0000 0x0 0x10000>,
+ <0x0 0x20000000 0x0 0x10000000>;
+ reg-names = "QuadSPI", "QuadSPI-memory";
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "qspi_en", "qspi";
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ status = "disabled";
+ };
+
esdhc: esdhc@...0000 {
compatible = "fsl,ls1088a-esdhc", "fsl,esdhc";
reg = <0x0 0x2140000 0x0 0x10000>;
--
2.17.1
Powered by blists - more mailing lists