| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20191204153233.791-1-benjamin.gaignard@st.com>
Date: Wed, 4 Dec 2019 16:32:33 +0100
From: Benjamin Gaignard <benjamin.gaignard@...com>
To: <broonie@...nel.org>, <robh+dt@...nel.org>, <mark.rutland@....com>,
<alexandre.torgue@...com>
CC: <linux-spi@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>,
Benjamin Gaignard <benjamin.gaignard@...com>,
Erwan Leray <erwan.leray@...com>,
Fabrice Gasnier <fabrice.gasnier@...com>,
Amelie Delaunay <amelie.delaunay@...com>
Subject: [PATCH] dt-bindings: spi: Convert stm32 spi bindings to json-schema
Convert the STM32 spi binding to DT schema format using json-schema
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@...com>
CC: Erwan Leray <erwan.leray@...com>
CC: Fabrice Gasnier <fabrice.gasnier@...com>
CC: Amelie Delaunay <amelie.delaunay@...com>
---
.../devicetree/bindings/spi/spi-stm32.txt | 62 ------------
.../devicetree/bindings/spi/st,stm32-spi.yaml | 105 +++++++++++++++++++++
2 files changed, 105 insertions(+), 62 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/spi/spi-stm32.txt
create mode 100644 Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
diff --git a/Documentation/devicetree/bindings/spi/spi-stm32.txt b/Documentation/devicetree/bindings/spi/spi-stm32.txt
deleted file mode 100644
index d82755c63eaf..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-stm32.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-STMicroelectronics STM32 SPI Controller
-
-The STM32 SPI controller is used to communicate with external devices using
-the Serial Peripheral Interface. It supports full-duplex, half-duplex and
-simplex synchronous serial communication with external devices. It supports
-from 4 to 32-bit data size. Although it can be configured as master or slave,
-only master is supported by the driver.
-
-Required properties:
-- compatible: Should be one of:
- "st,stm32h7-spi"
- "st,stm32f4-spi"
-- reg: Offset and length of the device's register set.
-- interrupts: Must contain the interrupt id.
-- clocks: Must contain an entry for spiclk (which feeds the internal clock
- generator).
-- #address-cells: Number of cells required to define a chip select address.
-- #size-cells: Should be zero.
-
-Optional properties:
-- resets: Must contain the phandle to the reset controller.
-- A pinctrl state named "default" may be defined to set pins in mode of
- operation for SPI transfer.
-- dmas: DMA specifiers for tx and rx dma. DMA fifo mode must be used. See the
- STM32 DMA bindings, Documentation/devicetree/bindings/dma/stm32-dma.txt.
-- dma-names: DMA request names should include "tx" and "rx" if present.
-- cs-gpios: list of GPIO chip selects. See the SPI bus bindings,
- Documentation/devicetree/bindings/spi/spi-bus.txt
-
-
-Child nodes represent devices on the SPI bus
- See ../spi/spi-bus.txt
-
-Optional properties:
-- st,spi-midi-ns: Only for STM32H7, (Master Inter-Data Idleness) minimum time
- delay in nanoseconds inserted between two consecutive data
- frames.
-
-
-Example:
- spi2: spi@...03800 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32h7-spi";
- reg = <0x40003800 0x400>;
- interrupts = <36>;
- clocks = <&rcc SPI2_CK>;
- resets = <&rcc 1166>;
- dmas = <&dmamux1 0 39 0x400 0x01>,
- <&dmamux1 1 40 0x400 0x01>;
- dma-names = "rx", "tx";
- pinctrl-0 = <&spi2_pins_b>;
- pinctrl-names = "default";
- cs-gpios = <&gpioa 11 0>;
-
- aardvark@0 {
- compatible = "totalphase,aardvark";
- reg = <0>;
- spi-max-frequency = <4000000>;
- st,spi-midi-ns = <4000>;
- };
- };
diff --git a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
new file mode 100644
index 000000000000..57ef3a0f57e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/st,stm32-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 SPI Controller bindings
+
+description: |
+ The STM32 SPI controller is used to communicate with external devices using
+ the Serial Peripheral Interface. It supports full-duplex, half-duplex and
+ simplex synchronous serial communication with external devices. It supports
+ from 4 to 32-bit data size.
+
+maintainers:
+ - Erwan Leray <erwan.leray@...com>
+ - Fabrice Gasnier <fabrice.gasnier@...com>
+
+allOf:
+ - $ref: "spi-controller.yaml#"
+ - if:
+ properties:
+ comptatible:
+ constains:
+ st,stm32f4-spi
+ then:
+ properties:
+ st,spi-midi-ns: false
+
+properties:
+ compatible:
+ enum:
+ - st,stm32f4-spi
+ - st,stm32h7-spi
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ dmas:
+ description: |
+ DMA specifiers for tx and rx dma. DMA fifo mode must be used. See
+ the STM32 DMA bindings Documentation/devicetree/bindings/dma/stm32-dma.txt.
+ items:
+ - description: rx DMA channel
+ - description: tx DMA channel
+
+ dma-names:
+ items:
+ - const: rx
+ - const: tx
+
+patternProperties:
+ "^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-f]+$":
+ type: object
+ # SPI slave nodes must be children of the SPI master node and can
+ # contain the following properties.
+ properties:
+ st,spi-midi-ns:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Only for STM32H7, (Master Inter-Data Idleness) minimum time
+ delay in nanoseconds inserted between two consecutive data frames.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/stm32mp1-clks.h>
+ #include <dt-bindings/reset/stm32mp1-resets.h>
+ spi@...0b000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32h7-spi";
+ reg = <0x4000b000 0x400>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SPI2_K>;
+ resets = <&rcc SPI2_R>;
+ dmas = <&dmamux1 0 39 0x400 0x05>,
+ <&dmamux1 1 40 0x400 0x05>;
+ dma-names = "rx", "tx";
+ cs-gpios = <&gpioa 11 0>;
+
+ aardvark@0 {
+ compatible = "totalphase,aardvark";
+ reg = <0>;
+ spi-max-frequency = <4000000>;
+ st,spi-midi-ns = <4000>;
+ };
+ };
+
+...
--
2.15.0
Powered by blists - more mailing lists