linux-kernel - [PATCH 0/7] qcom: add clk-vibrator driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20191205002503.13088-1-masneyb@onstation.org>
Date:   Wed,  4 Dec 2019 19:24:56 -0500
From:   Brian Masney <masneyb@...tation.org>
To:     sboyd@...nel.org, dmitry.torokhov@...il.com, robh+dt@...nel.org
Cc:     mark.rutland@....com, agross@...nel.org,
        bjorn.andersson@...aro.org, mturquette@...libre.com,
        linux-input@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        linux-clk@...r.kernel.org
Subject: [PATCH 0/7] qcom: add clk-vibrator driver

This patch series adds support for the vibrator that's found on the
Nexus 5 phone. I previously added a msm-vibrator driver to the input
subsystem, however that's not the correct approach since the direct
register writes should occur from within the clk subsystem based on the
conversation at
https://lore.kernel.org/lkml/20190516085018.2207-1-masneyb@onstation.org/

So this patch series:

  - Adds support for setting the clock duty cycle to clk-rcg2.c
  - Removes the msm-vibrator driver and adds a generic clk-vibrator
    driver in its place. No one is using this driver at the moment so we
    shouldn't get any complaints.

I also included the defconfig and dts changes. Once this whole series is
deemed to be ready, it can be merged in pieces through the different
subsystems. I included everything here as one patch series so everyone
can see the complete picture of what I'm doing.

Sorry it took me awhile to get back to correcting this; was working on
other tasks on this phone.

Brian Masney (7):
  clk: qcom: add support for setting the duty cycle
  dt-bindings: Input: drop msm-vibrator in favor of clk-vibrator
  Input: drop msm-vibrator in favor of clk-vibrator driver
  dt-bindings: Input: introduce new clock vibrator bindings
  Input: introduce new clock vibrator driver
  ARM: qcom_defconfig: drop msm-vibrator in favor of clk-vibrator driver
  ARM: dts: qcom: msm8974-hammerhead: add support for vibrator

 .../bindings/input/clk-vibrator.yaml          |  60 ++++++++
 .../bindings/input/msm-vibrator.txt           |  36 -----
 .../qcom-msm8974-lge-nexus5-hammerhead.dts    |  30 ++++
 arch/arm/configs/qcom_defconfig               |   2 +-
 drivers/clk/qcom/clk-rcg.h                    |   4 +
 drivers/clk/qcom/clk-rcg2.c                   |  61 +++++++-
 drivers/input/misc/Kconfig                    |  20 +--
 drivers/input/misc/Makefile                   |   2 +-
 .../misc/{msm-vibrator.c => clk-vibrator.c}   | 138 +++++++-----------
 9 files changed, 216 insertions(+), 137 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/input/clk-vibrator.yaml
 delete mode 100644 Documentation/devicetree/bindings/input/msm-vibrator.txt
 rename drivers/input/misc/{msm-vibrator.c => clk-vibrator.c} (51%)

-- 
2.21.0