| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <f217945d-ab64-10cc-bb12-3a4d810ff25a@cambridgegreys.com>
Date: Fri, 6 Dec 2019 07:23:26 +0000
From: Anton Ivanov <anton.ivanov@...bridgegreys.com>
To: Brendan Higgins <brendanhiggins@...gle.com>, jdike@...toit.com,
richard@....at
Cc: johannes.berg@...el.com, linux-um@...ts.infradead.org,
linux-kernel@...r.kernel.org, davidgow@...gle.com
Subject: Re: [RFC v1 1/2] um: drivers: remove support for UML_NET_PCAP
On 06/12/2019 02:01, Brendan Higgins wrote:
> Remove support for UML_NET_PCAP. It is broken. When building with
> libpcap installed, the build fails:
>
> arch/um/drivers/pcap_user.c:35:12: error: conflicting types for ‘pcap_open’
> static int pcap_open(void *data)
> ^~~~~~~~~
> In file included from /usr/include/pcap.h:43,
> from arch/um/drivers/pcap_user.c:7:
> /usr/include/pcap/pcap.h:859:18: note: previous declaration of ‘pcap_open’ was here
> PCAP_API pcap_t *pcap_open(const char *source, int snaplen, int flags,
> ^~~~~~~~~
>
> So it looks like this has probably been broken for some time.
>
> In interest of trying to make allyesconfig work with UML, it is best
> just to drop this.
>
> Signed-off-by: Brendan Higgins <brendanhiggins@...gle.com>
> ---
> arch/um/drivers/Kconfig | 16 -----
> arch/um/drivers/Makefile | 17 +----
> arch/um/drivers/pcap_kern.c | 113 -----------------------------
> arch/um/drivers/pcap_user.c | 137 ------------------------------------
> arch/um/drivers/pcap_user.h | 21 ------
> 5 files changed, 2 insertions(+), 302 deletions(-)
> delete mode 100644 arch/um/drivers/pcap_kern.c
> delete mode 100644 arch/um/drivers/pcap_user.c
> delete mode 100644 arch/um/drivers/pcap_user.h
>
> diff --git a/arch/um/drivers/Kconfig b/arch/um/drivers/Kconfig
> index 388096fb45a25..98fead07c33de 100644
> --- a/arch/um/drivers/Kconfig
> +++ b/arch/um/drivers/Kconfig
> @@ -291,22 +291,6 @@ config UML_NET_MCAST
> exclusive). If you don't need to network UMLs say N to each of
> the transports.
>
> -config UML_NET_PCAP
> - bool "pcap transport"
> - depends on UML_NET
> - help
> - The pcap transport makes a pcap packet stream on the host look
> - like an ethernet device inside UML. This is useful for making
> - UML act as a network monitor for the host. You must have libcap
> - installed in order to build the pcap transport into UML.
> -
> - For more information, see
> - <http://user-mode-linux.sourceforge.net/old/networking.html> That site
> - has examples of the UML command line to use to enable this option.
> -
> - If you intend to use UML as a network monitor for the host, say
> - Y here. Otherwise, say N.
> -
> config UML_NET_SLIRP
> bool "SLiRP transport"
> depends on UML_NET
> diff --git a/arch/um/drivers/Makefile b/arch/um/drivers/Makefile
> index a290821e355c2..7548b18e77a27 100644
> --- a/arch/um/drivers/Makefile
> +++ b/arch/um/drivers/Makefile
> @@ -3,9 +3,6 @@
> # Copyright (C) 2000, 2002, 2003 Jeff Dike (jdike@...aya.com)
> #
>
> -# pcap is broken in 2.5 because kbuild doesn't allow pcap.a to be linked
> -# in to pcap.o
> -
> slip-objs := slip_kern.o slip_user.o
> slirp-objs := slirp_kern.o slirp_user.o
> daemon-objs := daemon_kern.o daemon_user.o
> @@ -18,14 +15,9 @@ ubd-objs := ubd_kern.o ubd_user.o
> port-objs := port_kern.o port_user.o
> harddog-objs := harddog_kern.o harddog_user.o
>
> -LDFLAGS_pcap.o := -r $(shell $(CC) $(KBUILD_CFLAGS) -print-file-name=libpcap.a)
> -
> LDFLAGS_vde.o := -r $(shell $(CC) $(CFLAGS) -print-file-name=libvdeplug.a)
>
> -targets := pcap_kern.o pcap_user.o vde_kern.o vde_user.o
> -
> -$(obj)/pcap.o: $(obj)/pcap_kern.o $(obj)/pcap_user.o
> - $(LD) -r -dp -o $@ $^ $(ld_flags)
> +targets := vde_kern.o vde_user.o
>
> $(obj)/vde.o: $(obj)/vde_kern.o $(obj)/vde_user.o
> $(LD) -r -dp -o $@ $^ $(ld_flags)
> @@ -34,9 +26,6 @@ $(obj)/vde.o: $(obj)/vde_kern.o $(obj)/vde_user.o
> # object name, so nothing from the library gets linked.
> #$(call if_changed,ld)
>
> -# When the above is fixed, don't forget to add this too!
> -#targets += $(obj)/pcap.o
> -
> obj-y := stdio_console.o fd.o chan_kern.o chan_user.o line.o
> obj-$(CONFIG_SSL) += ssl.o
> obj-$(CONFIG_STDERR_CONSOLE) += stderr_console.o
> @@ -47,7 +36,6 @@ obj-$(CONFIG_UML_NET_DAEMON) += daemon.o
> obj-$(CONFIG_UML_NET_VECTOR) += vector.o
> obj-$(CONFIG_UML_NET_VDE) += vde.o
> obj-$(CONFIG_UML_NET_MCAST) += umcast.o
> -obj-$(CONFIG_UML_NET_PCAP) += pcap.o
> obj-$(CONFIG_UML_NET) += net.o
> obj-$(CONFIG_MCONSOLE) += mconsole.o
> obj-$(CONFIG_MMAPPER) += mmapper_kern.o
> @@ -63,8 +51,7 @@ obj-$(CONFIG_BLK_DEV_COW_COMMON) += cow_user.o
> obj-$(CONFIG_UML_RANDOM) += random.o
> obj-$(CONFIG_VIRTIO_UML) += virtio_uml.o
>
> -# pcap_user.o must be added explicitly.
> -USER_OBJS := fd.o null.o pty.o tty.o xterm.o slip_common.o pcap_user.o vde_user.o vector_user.o
> +USER_OBJS := fd.o null.o pty.o tty.o xterm.o slip_common.o vde_user.o vector_user.o
> CFLAGS_null.o = -DDEV_NULL=$(DEV_NULL_PATH)
>
> include arch/um/scripts/Makefile.rules
> diff --git a/arch/um/drivers/pcap_kern.c b/arch/um/drivers/pcap_kern.c
> deleted file mode 100644
> index cfe4cb17694cc..0000000000000
> --- a/arch/um/drivers/pcap_kern.c
> +++ /dev/null
> @@ -1,113 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0
> -/*
> - * Copyright (C) 2002 - 2007 Jeff Dike (jdike@...dtoit,linux.intel}.com)
> - */
> -
> -#include <linux/init.h>
> -#include <linux/netdevice.h>
> -#include <net_kern.h>
> -#include "pcap_user.h"
> -
> -struct pcap_init {
> - char *host_if;
> - int promisc;
> - int optimize;
> - char *filter;
> -};
> -
> -void pcap_init(struct net_device *dev, void *data)
> -{
> - struct uml_net_private *pri;
> - struct pcap_data *ppri;
> - struct pcap_init *init = data;
> -
> - pri = netdev_priv(dev);
> - ppri = (struct pcap_data *) pri->user;
> - ppri->host_if = init->host_if;
> - ppri->promisc = init->promisc;
> - ppri->optimize = init->optimize;
> - ppri->filter = init->filter;
> -
> - printk("pcap backend, host interface %s\n", ppri->host_if);
> -}
> -
> -static int pcap_read(int fd, struct sk_buff *skb, struct uml_net_private *lp)
> -{
> - return pcap_user_read(fd, skb_mac_header(skb),
> - skb->dev->mtu + ETH_HEADER_OTHER,
> - (struct pcap_data *) &lp->user);
> -}
> -
> -static int pcap_write(int fd, struct sk_buff *skb, struct uml_net_private *lp)
> -{
> - return -EPERM;
> -}
> -
> -static const struct net_kern_info pcap_kern_info = {
> - .init = pcap_init,
> - .protocol = eth_protocol,
> - .read = pcap_read,
> - .write = pcap_write,
> -};
> -
> -int pcap_setup(char *str, char **mac_out, void *data)
> -{
> - struct pcap_init *init = data;
> - char *remain, *host_if = NULL, *options[2] = { NULL, NULL };
> - int i;
> -
> - *init = ((struct pcap_init)
> - { .host_if = "eth0",
> - .promisc = 1,
> - .optimize = 0,
> - .filter = NULL });
> -
> - remain = split_if_spec(str, &host_if, &init->filter,
> - &options[0], &options[1], mac_out, NULL);
> - if (remain != NULL) {
> - printk(KERN_ERR "pcap_setup - Extra garbage on "
> - "specification : '%s'\n", remain);
> - return 0;
> - }
> -
> - if (host_if != NULL)
> - init->host_if = host_if;
> -
> - for (i = 0; i < ARRAY_SIZE(options); i++) {
> - if (options[i] == NULL)
> - continue;
> - if (!strcmp(options[i], "promisc"))
> - init->promisc = 1;
> - else if (!strcmp(options[i], "nopromisc"))
> - init->promisc = 0;
> - else if (!strcmp(options[i], "optimize"))
> - init->optimize = 1;
> - else if (!strcmp(options[i], "nooptimize"))
> - init->optimize = 0;
> - else {
> - printk(KERN_ERR "pcap_setup : bad option - '%s'\n",
> - options[i]);
> - return 0;
> - }
> - }
> -
> - return 1;
> -}
> -
> -static struct transport pcap_transport = {
> - .list = LIST_HEAD_INIT(pcap_transport.list),
> - .name = "pcap",
> - .setup = pcap_setup,
> - .user = &pcap_user_info,
> - .kern = &pcap_kern_info,
> - .private_size = sizeof(struct pcap_data),
> - .setup_size = sizeof(struct pcap_init),
> -};
> -
> -static int register_pcap(void)
> -{
> - register_transport(&pcap_transport);
> - return 0;
> -}
> -
> -late_initcall(register_pcap);
> diff --git a/arch/um/drivers/pcap_user.c b/arch/um/drivers/pcap_user.c
> deleted file mode 100644
> index bbd20638788af..0000000000000
> --- a/arch/um/drivers/pcap_user.c
> +++ /dev/null
> @@ -1,137 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0
> -/*
> - * Copyright (C) 2002 - 2007 Jeff Dike (jdike@...dtoit,linux.intel}.com)
> - */
> -
> -#include <errno.h>
> -#include <pcap.h>
> -#include <string.h>
> -#include <asm/types.h>
> -#include <net_user.h>
> -#include "pcap_user.h"
> -#include <um_malloc.h>
> -
> -#define PCAP_FD(p) (*(int *)(p))
> -
> -static int pcap_user_init(void *data, void *dev)
> -{
> - struct pcap_data *pri = data;
> - pcap_t *p;
> - char errors[PCAP_ERRBUF_SIZE];
> -
> - p = pcap_open_live(pri->host_if, ETH_MAX_PACKET + ETH_HEADER_OTHER,
> - pri->promisc, 0, errors);
> - if (p == NULL) {
> - printk(UM_KERN_ERR "pcap_user_init : pcap_open_live failed - "
> - "'%s'\n", errors);
> - return -EINVAL;
> - }
> -
> - pri->dev = dev;
> - pri->pcap = p;
> - return 0;
> -}
> -
> -static int pcap_open(void *data)
> -{
> - struct pcap_data *pri = data;
> - __u32 netmask;
> - int err;
> -
> - if (pri->pcap == NULL)
> - return -ENODEV;
> -
> - if (pri->filter != NULL) {
> - err = dev_netmask(pri->dev, &netmask);
> - if (err < 0) {
> - printk(UM_KERN_ERR "pcap_open : dev_netmask failed\n");
> - return -EIO;
> - }
> -
> - pri->compiled = uml_kmalloc(sizeof(struct bpf_program),
> - UM_GFP_KERNEL);
> - if (pri->compiled == NULL) {
> - printk(UM_KERN_ERR "pcap_open : kmalloc failed\n");
> - return -ENOMEM;
> - }
> -
> - err = pcap_compile(pri->pcap,
> - (struct bpf_program *) pri->compiled,
> - pri->filter, pri->optimize, netmask);
> - if (err < 0) {
> - printk(UM_KERN_ERR "pcap_open : pcap_compile failed - "
> - "'%s'\n", pcap_geterr(pri->pcap));
> - goto out;
> - }
> -
> - err = pcap_setfilter(pri->pcap, pri->compiled);
> - if (err < 0) {
> - printk(UM_KERN_ERR "pcap_open : pcap_setfilter "
> - "failed - '%s'\n", pcap_geterr(pri->pcap));
> - goto out;
> - }
> - }
> -
> - return PCAP_FD(pri->pcap);
> -
> - out:
> - kfree(pri->compiled);
> - return -EIO;
> -}
> -
> -static void pcap_remove(void *data)
> -{
> - struct pcap_data *pri = data;
> -
> - if (pri->compiled != NULL)
> - pcap_freecode(pri->compiled);
> -
> - if (pri->pcap != NULL)
> - pcap_close(pri->pcap);
> -}
> -
> -struct pcap_handler_data {
> - char *buffer;
> - int len;
> -};
> -
> -static void handler(u_char *data, const struct pcap_pkthdr *header,
> - const u_char *packet)
> -{
> - int len;
> -
> - struct pcap_handler_data *hdata = (struct pcap_handler_data *) data;
> -
> - len = hdata->len < header->caplen ? hdata->len : header->caplen;
> - memcpy(hdata->buffer, packet, len);
> - hdata->len = len;
> -}
> -
> -int pcap_user_read(int fd, void *buffer, int len, struct pcap_data *pri)
> -{
> - struct pcap_handler_data hdata = ((struct pcap_handler_data)
> - { .buffer = buffer,
> - .len = len });
> - int n;
> -
> - n = pcap_dispatch(pri->pcap, 1, handler, (u_char *) &hdata);
> - if (n < 0) {
> - printk(UM_KERN_ERR "pcap_dispatch failed - %s\n",
> - pcap_geterr(pri->pcap));
> - return -EIO;
> - }
> - else if (n == 0)
> - return 0;
> - return hdata.len;
> -}
> -
> -const struct net_user_info pcap_user_info = {
> - .init = pcap_user_init,
> - .open = pcap_open,
> - .close = NULL,
> - .remove = pcap_remove,
> - .add_address = NULL,
> - .delete_address = NULL,
> - .mtu = ETH_MAX_PACKET,
> - .max_packet = ETH_MAX_PACKET + ETH_HEADER_OTHER,
> -};
> diff --git a/arch/um/drivers/pcap_user.h b/arch/um/drivers/pcap_user.h
> deleted file mode 100644
> index 216246f5f09bd..0000000000000
> --- a/arch/um/drivers/pcap_user.h
> +++ /dev/null
> @@ -1,21 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0 */
> -/*
> - * Copyright (C) 2002 Jeff Dike (jdike@...aya.com)
> - */
> -
> -#include <net_user.h>
> -
> -struct pcap_data {
> - char *host_if;
> - int promisc;
> - int optimize;
> - char *filter;
> - void *compiled;
> - void *pcap;
> - void *dev;
> -};
> -
> -extern const struct net_user_info pcap_user_info;
> -
> -extern int pcap_user_read(int fd, void *buf, int len, struct pcap_data *pri);
> -
>
1. There is a proposed patch for the build system to fix it.
2. We should be removing all old drivers and replacing them with the
vector ones.
--
Anton R. Ivanov
Cambridgegreys Limited. Registered in England. Company Number 10273661
https://www.cambridgegreys.com/
Powered by blists - more mailing lists