linux-kernel - [PATCH 0/2] PCI: amlogic: Make PCIe working reliably on AXG platforms

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20191208210320.15539-1-repk@triplefau.lt>
Date:   Sun,  8 Dec 2019 22:03:18 +0100
From:   Remi Pommarel <repk@...plefau.lt>
To:     Neil Armstrong <narmstrong@...libre.com>,
        Jerome Brunet <jbrunet@...libre.com>,
        Kevin Hilman <khilman@...libre.com>,
        Yue Wang <yue.wang@...ogic.com>
Cc:     Michael Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...nel.org>,
        Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
        linux-amlogic@...ts.infradead.org, linux-clk@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-pci@...r.kernel.org, Remi Pommarel <repk@...plefau.lt>
Subject: [PATCH 0/2] PCI: amlogic: Make PCIe working reliably on AXG platforms

PCIe device probing failures have been seen on some AXG platforms and were
due to unreliable clock signal output. Setting HHI_MIPI_CNTL0[26] bit
solved the problem. After being contacted about this, vendor reported that
this bit was linked to PCIe PLL CML output.

This serie adds a way to set this bit through AXG clock gating logic.
Platforms having this kind of issue could make use of this gating by
applying a patch to their devicetree similar to:

                clocks = <&clkc CLKID_USB
                        &clkc CLKID_MIPI_ENABLE
                        &clkc CLKID_PCIE_A
-                       &clkc CLKID_PCIE_CML_EN0>;
+                       &clkc CLKID_PCIE_CML_EN0
+                       &clkc CLKID_PCIE_PLL_CML_ENABLE>;
                clock-names = "pcie_general",
                                "pcie_mipi_en",
                                "pcie",
-                               "port";
+                               "port",
+                               "pll_cml_en";
                resets = <&reset RESET_PCIE_PHY>,
                        <&reset RESET_PCIE_A>,
                        <&reset RESET_PCIE_APB>;


Remi Pommarel (2):
  clk: meson: axg: add pcie pll cml gating
  PCI: amlogic: Use PCIe pll gate when available

 drivers/clk/meson/axg.c                | 3 +++
 drivers/clk/meson/axg.h                | 2 +-
 drivers/pci/controller/dwc/pci-meson.c | 5 +++++
 include/dt-bindings/clock/axg-clkc.h   | 1 +
 4 files changed, 10 insertions(+), 1 deletion(-)

-- 
2.24.0