linux-kernel - [PATCH v2 2/2] scsi: ufs-mediatek: add device reset implementation

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 9 Dec 2019 16:29:14 +0800
From:   Stanley Chu <stanley.chu@...iatek.com>
To:     <linux-scsi@...r.kernel.org>, <martin.petersen@...cle.com>,
        <avri.altman@....com>, <alim.akhtar@...sung.com>,
        <pedrom.sousa@...opsys.com>, <jejb@...ux.ibm.com>,
        <matthias.bgg@...il.com>, <f.fainelli@...il.com>
CC:     <linux-mediatek@...ts.infradead.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <beanhuo@...ron.com>,
        <kuohong.wang@...iatek.com>, <peter.wang@...iatek.com>,
        <chun-hung.wu@...iatek.com>, <andy.teng@...iatek.com>,
        <leon.chen@...iatek.com>, Stanley Chu <stanley.chu@...iatek.com>
Subject: [PATCH v2 2/2] scsi: ufs-mediatek: add device reset implementation

Add device reset vops implementation in MediaTek UFS driver.

Signed-off-by: Stanley Chu <stanley.chu@...iatek.com>
---
 drivers/scsi/ufs/ufs-mediatek.c | 27 +++++++++++++++++++++++++++
 drivers/scsi/ufs/ufs-mediatek.h |  7 +++++++
 2 files changed, 34 insertions(+)

diff --git a/drivers/scsi/ufs/ufs-mediatek.c b/drivers/scsi/ufs/ufs-mediatek.c
index 83e28edc3ac5..6a3ec11b16db 100644
--- a/drivers/scsi/ufs/ufs-mediatek.c
+++ b/drivers/scsi/ufs/ufs-mediatek.c
@@ -6,10 +6,12 @@
  *	Peter Wang <peter.wang@...iatek.com>
  */
 
+#include <linux/arm-smccc.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/soc/mediatek/mtk_sip_svc.h>
 
 #include "ufshcd.h"
 #include "ufshcd-pltfrm.h"
@@ -269,6 +271,30 @@ static int ufs_mtk_link_startup_notify(struct ufs_hba *hba,
 	return ret;
 }
 
+static void ufs_mtk_device_reset(struct ufs_hba *hba)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_smc(MTK_SIP_UFS_CONTROL, UFS_MTK_SIP_DEVICE_RESET,
+		      0, 0, 0, 0, 0, 0, &res);
+	/*
+	 * The reset signal is active low. UFS devices shall detect
+	 * more than or equal to 1us of positive or negative RST_n
+	 * pulse width.
+	 *
+	 * To be on safe side, keep the reset low for at least 10us.
+	 */
+	usleep_range(10, 15);
+
+	arm_smccc_smc(MTK_SIP_UFS_CONTROL, UFS_MTK_SIP_DEVICE_RESET,
+		      1, 0, 0, 0, 0, 0, &res);
+
+	/* Some devices may need time to respond to rst_n */
+	usleep_range(10000, 15000);
+
+	dev_info(hba->dev, "device reset done\n");
+}
+
 static int ufs_mtk_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 {
 	struct ufs_mtk_host *host = ufshcd_get_variant(hba);
@@ -303,6 +329,7 @@ static struct ufs_hba_variant_ops ufs_hba_mtk_vops = {
 	.pwr_change_notify   = ufs_mtk_pwr_change_notify,
 	.suspend             = ufs_mtk_suspend,
 	.resume              = ufs_mtk_resume,
+	.device_reset        = ufs_mtk_device_reset,
 };
 
 /**
diff --git a/drivers/scsi/ufs/ufs-mediatek.h b/drivers/scsi/ufs/ufs-mediatek.h
index 19f8c42fe06f..b03f601d3a9e 100644
--- a/drivers/scsi/ufs/ufs-mediatek.h
+++ b/drivers/scsi/ufs/ufs-mediatek.h
@@ -6,6 +6,8 @@
 #ifndef _UFS_MEDIATEK_H
 #define _UFS_MEDIATEK_H
 
+#include <linux/bitops.h>
+
 /*
  * Vendor specific pre-defined parameters
  */
@@ -29,6 +31,11 @@
 #define VS_SAVEPOWERCONTROL         0xD0A6
 #define VS_UNIPROPOWERDOWNCONTROL   0xD0A8
 
+/*
+ * SiP commands
+ */
+#define UFS_MTK_SIP_DEVICE_RESET    BIT(1)
+
 /*
  * VS_DEBUGCLOCKENABLE
  */
-- 
2.18.0