| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20191209094332.4047-8-peter.ujfalusi@ti.com>
Date: Mon, 9 Dec 2019 11:43:27 +0200
From: Peter Ujfalusi <peter.ujfalusi@...com>
To: <vkoul@...nel.org>, <robh+dt@...nel.org>, <nm@...com>,
<ssantosh@...nel.org>
CC: <dan.j.williams@...el.com>, <dmaengine@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<grygorii.strashko@...com>, <lokeshvutla@...com>,
<t-kristo@...com>, <tony@...mide.com>, <j-keerthy@...com>,
<vigneshr@...com>
Subject: [PATCH v7 07/12] dmaengine: ti: k3 PSI-L remote endpoint configuration
In K3 architecture the DMA operates within threads. One end of the thread
is UDMAP, the other is on the peripheral side.
The UDMAP channel configuration depends on the needs of the remote
endpoint and it can be differ from peripheral to peripheral.
This patch adds database for am654 and j721e and small API to fetch the
PSI-L endpoint configuration from the database which should only used by
the DMA driver(s).
Another API is added for native peripherals to give possibility to pass new
configuration for the threads they are using, which is needed to be able to
handle changes caused by different firmware loaded for the peripheral for
example.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@...com>
---
drivers/dma/ti/Kconfig | 3 +
drivers/dma/ti/Makefile | 1 +
drivers/dma/ti/k3-psil-am654.c | 175 ++++++++++++++++++++++++++
drivers/dma/ti/k3-psil-j721e.c | 222 +++++++++++++++++++++++++++++++++
drivers/dma/ti/k3-psil-priv.h | 39 ++++++
drivers/dma/ti/k3-psil.c | 97 ++++++++++++++
include/linux/dma/k3-psil.h | 71 +++++++++++
7 files changed, 608 insertions(+)
create mode 100644 drivers/dma/ti/k3-psil-am654.c
create mode 100644 drivers/dma/ti/k3-psil-j721e.c
create mode 100644 drivers/dma/ti/k3-psil-priv.h
create mode 100644 drivers/dma/ti/k3-psil.c
create mode 100644 include/linux/dma/k3-psil.h
diff --git a/drivers/dma/ti/Kconfig b/drivers/dma/ti/Kconfig
index d507c24fbf31..72f3d2728178 100644
--- a/drivers/dma/ti/Kconfig
+++ b/drivers/dma/ti/Kconfig
@@ -34,5 +34,8 @@ config DMA_OMAP
Enable support for the TI sDMA (System DMA or DMA4) controller. This
DMA engine is found on OMAP and DRA7xx parts.
+config TI_K3_PSIL
+ bool
+
config TI_DMA_CROSSBAR
bool
diff --git a/drivers/dma/ti/Makefile b/drivers/dma/ti/Makefile
index 113e59ec9c32..f8d912ad7eaf 100644
--- a/drivers/dma/ti/Makefile
+++ b/drivers/dma/ti/Makefile
@@ -2,4 +2,5 @@
obj-$(CONFIG_TI_CPPI41) += cppi41.o
obj-$(CONFIG_TI_EDMA) += edma.o
obj-$(CONFIG_DMA_OMAP) += omap-dma.o
+obj-$(CONFIG_TI_K3_PSIL) += k3-psil.o k3-psil-am654.o k3-psil-j721e.o
obj-$(CONFIG_TI_DMA_CROSSBAR) += dma-crossbar.o
diff --git a/drivers/dma/ti/k3-psil-am654.c b/drivers/dma/ti/k3-psil-am654.c
new file mode 100644
index 000000000000..7da9242b6114
--- /dev/null
+++ b/drivers/dma/ti/k3-psil-am654.c
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com
+ * Author: Peter Ujfalusi <peter.ujfalusi@...com>
+ */
+
+#include <linux/kernel.h>
+
+#include "k3-psil-priv.h"
+
+#define PSIL_PDMA_XY_TR(x) \
+ { \
+ .thread_id = x, \
+ .ep_config = { \
+ .ep_type = PSIL_EP_PDMA_XY, \
+ }, \
+ }
+
+#define PSIL_PDMA_XY_PKT(x) \
+ { \
+ .thread_id = x, \
+ .ep_config = { \
+ .ep_type = PSIL_EP_PDMA_XY, \
+ .pkt_mode = 1, \
+ }, \
+ }
+
+#define PSIL_ETHERNET(x) \
+ { \
+ .thread_id = x, \
+ .ep_config = { \
+ .ep_type = PSIL_EP_NATIVE, \
+ .pkt_mode = 1, \
+ .needs_epib = 1, \
+ .psd_size = 16, \
+ }, \
+ }
+
+#define PSIL_SA2UL(x, tx) \
+ { \
+ .thread_id = x, \
+ .ep_config = { \
+ .ep_type = PSIL_EP_NATIVE, \
+ .pkt_mode = 1, \
+ .needs_epib = 1, \
+ .psd_size = 64, \
+ .notdpkt = tx, \
+ }, \
+ }
+
+/* PSI-L source thread IDs, used for RX (DMA_DEV_TO_MEM) */
+struct psil_ep am654_src_ep_map[] = {
+ /* SA2UL */
+ PSIL_SA2UL(0x4000, 0),
+ PSIL_SA2UL(0x4001, 0),
+ PSIL_SA2UL(0x4002, 0),
+ PSIL_SA2UL(0x4003, 0),
+ /* PRU_ICSSG0 */
+ PSIL_ETHERNET(0x4100),
+ PSIL_ETHERNET(0x4101),
+ PSIL_ETHERNET(0x4102),
+ PSIL_ETHERNET(0x4103),
+ /* PRU_ICSSG1 */
+ PSIL_ETHERNET(0x4200),
+ PSIL_ETHERNET(0x4201),
+ PSIL_ETHERNET(0x4202),
+ PSIL_ETHERNET(0x4203),
+ /* PRU_ICSSG2 */
+ PSIL_ETHERNET(0x4300),
+ PSIL_ETHERNET(0x4301),
+ PSIL_ETHERNET(0x4302),
+ PSIL_ETHERNET(0x4303),
+ /* PDMA0 - McASPs */
+ PSIL_PDMA_XY_TR(0x4400),
+ PSIL_PDMA_XY_TR(0x4401),
+ PSIL_PDMA_XY_TR(0x4402),
+ /* PDMA1 - SPI0-4 */
+ PSIL_PDMA_XY_PKT(0x4500),
+ PSIL_PDMA_XY_PKT(0x4501),
+ PSIL_PDMA_XY_PKT(0x4502),
+ PSIL_PDMA_XY_PKT(0x4503),
+ PSIL_PDMA_XY_PKT(0x4504),
+ PSIL_PDMA_XY_PKT(0x4505),
+ PSIL_PDMA_XY_PKT(0x4506),
+ PSIL_PDMA_XY_PKT(0x4507),
+ PSIL_PDMA_XY_PKT(0x4508),
+ PSIL_PDMA_XY_PKT(0x4509),
+ PSIL_PDMA_XY_PKT(0x450a),
+ PSIL_PDMA_XY_PKT(0x450b),
+ PSIL_PDMA_XY_PKT(0x450c),
+ PSIL_PDMA_XY_PKT(0x450d),
+ PSIL_PDMA_XY_PKT(0x450e),
+ PSIL_PDMA_XY_PKT(0x450f),
+ PSIL_PDMA_XY_PKT(0x4510),
+ PSIL_PDMA_XY_PKT(0x4511),
+ PSIL_PDMA_XY_PKT(0x4512),
+ PSIL_PDMA_XY_PKT(0x4513),
+ /* PDMA1 - USART0-2 */
+ PSIL_PDMA_XY_PKT(0x4514),
+ PSIL_PDMA_XY_PKT(0x4515),
+ PSIL_PDMA_XY_PKT(0x4516),
+ /* CPSW0 */
+ PSIL_ETHERNET(0x7000),
+ /* MCU_PDMA0 - ADCs */
+ PSIL_PDMA_XY_TR(0x7100),
+ PSIL_PDMA_XY_TR(0x7101),
+ PSIL_PDMA_XY_TR(0x7102),
+ PSIL_PDMA_XY_TR(0x7103),
+ /* MCU_PDMA1 - MCU_SPI0-2 */
+ PSIL_PDMA_XY_PKT(0x7200),
+ PSIL_PDMA_XY_PKT(0x7201),
+ PSIL_PDMA_XY_PKT(0x7202),
+ PSIL_PDMA_XY_PKT(0x7203),
+ PSIL_PDMA_XY_PKT(0x7204),
+ PSIL_PDMA_XY_PKT(0x7205),
+ PSIL_PDMA_XY_PKT(0x7206),
+ PSIL_PDMA_XY_PKT(0x7207),
+ PSIL_PDMA_XY_PKT(0x7208),
+ PSIL_PDMA_XY_PKT(0x7209),
+ PSIL_PDMA_XY_PKT(0x720a),
+ PSIL_PDMA_XY_PKT(0x720b),
+ /* MCU_PDMA1 - MCU_USART0 */
+ PSIL_PDMA_XY_PKT(0x7212),
+};
+
+/* PSI-L destination thread IDs, used for TX (DMA_MEM_TO_DEV) */
+struct psil_ep am654_dst_ep_map[] = {
+ /* SA2UL */
+ PSIL_SA2UL(0xc000, 1),
+ PSIL_SA2UL(0xc001, 1),
+ /* PRU_ICSSG0 */
+ PSIL_ETHERNET(0xc100),
+ PSIL_ETHERNET(0xc101),
+ PSIL_ETHERNET(0xc102),
+ PSIL_ETHERNET(0xc103),
+ PSIL_ETHERNET(0xc104),
+ PSIL_ETHERNET(0xc105),
+ PSIL_ETHERNET(0xc106),
+ PSIL_ETHERNET(0xc107),
+ /* PRU_ICSSG1 */
+ PSIL_ETHERNET(0xc200),
+ PSIL_ETHERNET(0xc201),
+ PSIL_ETHERNET(0xc202),
+ PSIL_ETHERNET(0xc203),
+ PSIL_ETHERNET(0xc204),
+ PSIL_ETHERNET(0xc205),
+ PSIL_ETHERNET(0xc206),
+ PSIL_ETHERNET(0xc207),
+ /* PRU_ICSSG2 */
+ PSIL_ETHERNET(0xc300),
+ PSIL_ETHERNET(0xc301),
+ PSIL_ETHERNET(0xc302),
+ PSIL_ETHERNET(0xc303),
+ PSIL_ETHERNET(0xc304),
+ PSIL_ETHERNET(0xc305),
+ PSIL_ETHERNET(0xc306),
+ PSIL_ETHERNET(0xc307),
+ /* CPSW0 */
+ PSIL_ETHERNET(0xf000),
+ PSIL_ETHERNET(0xf001),
+ PSIL_ETHERNET(0xf002),
+ PSIL_ETHERNET(0xf003),
+ PSIL_ETHERNET(0xf004),
+ PSIL_ETHERNET(0xf005),
+ PSIL_ETHERNET(0xf006),
+ PSIL_ETHERNET(0xf007),
+};
+
+struct psil_ep_map am654_ep_map = {
+ .name = "am654",
+ .src = am654_src_ep_map,
+ .src_count = ARRAY_SIZE(am654_src_ep_map),
+ .dst = am654_dst_ep_map,
+ .dst_count = ARRAY_SIZE(am654_dst_ep_map),
+};
diff --git a/drivers/dma/ti/k3-psil-j721e.c b/drivers/dma/ti/k3-psil-j721e.c
new file mode 100644
index 000000000000..a609d496fddd
--- /dev/null
+++ b/drivers/dma/ti/k3-psil-j721e.c
@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com
+ * Author: Peter Ujfalusi <peter.ujfalusi@...com>
+ */
+
+#include <linux/kernel.h>
+
+#include "k3-psil-priv.h"
+
+#define PSIL_PDMA_XY_TR(x) \
+ { \
+ .thread_id = x, \
+ .ep_config = { \
+ .ep_type = PSIL_EP_PDMA_XY, \
+ }, \
+ }
+
+#define PSIL_PDMA_XY_PKT(x) \
+ { \
+ .thread_id = x, \
+ .ep_config = { \
+ .ep_type = PSIL_EP_PDMA_XY, \
+ .pkt_mode = 1, \
+ }, \
+ }
+
+#define PSIL_PDMA_MCASP(x) \
+ { \
+ .thread_id = x, \
+ .ep_config = { \
+ .ep_type = PSIL_EP_PDMA_XY, \
+ .pdma_acc32 = 1, \
+ .pdma_burst = 1, \
+ }, \
+ }
+
+#define PSIL_ETHERNET(x) \
+ { \
+ .thread_id = x, \
+ .ep_config = { \
+ .ep_type = PSIL_EP_NATIVE, \
+ .pkt_mode = 1, \
+ .needs_epib = 1, \
+ .psd_size = 16, \
+ }, \
+ }
+
+#define PSIL_SA2UL(x, tx) \
+ { \
+ .thread_id = x, \
+ .ep_config = { \
+ .ep_type = PSIL_EP_NATIVE, \
+ .pkt_mode = 1, \
+ .needs_epib = 1, \
+ .psd_size = 64, \
+ .notdpkt = tx, \
+ }, \
+ }
+
+/* PSI-L source thread IDs, used for RX (DMA_DEV_TO_MEM) */
+struct psil_ep j721e_src_ep_map[] = {
+ /* SA2UL */
+ PSIL_SA2UL(0x4000, 0),
+ PSIL_SA2UL(0x4001, 0),
+ PSIL_SA2UL(0x4002, 0),
+ PSIL_SA2UL(0x4003, 0),
+ /* PRU_ICSSG0 */
+ PSIL_ETHERNET(0x4100),
+ PSIL_ETHERNET(0x4101),
+ PSIL_ETHERNET(0x4102),
+ PSIL_ETHERNET(0x4103),
+ /* PRU_ICSSG1 */
+ PSIL_ETHERNET(0x4200),
+ PSIL_ETHERNET(0x4201),
+ PSIL_ETHERNET(0x4202),
+ PSIL_ETHERNET(0x4203),
+ /* PDMA6 (PSIL_PDMA_MCASP_G0) - McASP0-2 */
+ PSIL_PDMA_MCASP(0x4400),
+ PSIL_PDMA_MCASP(0x4401),
+ PSIL_PDMA_MCASP(0x4402),
+ /* PDMA7 (PSIL_PDMA_MCASP_G1) - McASP3-11 */
+ PSIL_PDMA_MCASP(0x4500),
+ PSIL_PDMA_MCASP(0x4501),
+ PSIL_PDMA_MCASP(0x4502),
+ PSIL_PDMA_MCASP(0x4503),
+ PSIL_PDMA_MCASP(0x4504),
+ PSIL_PDMA_MCASP(0x4505),
+ PSIL_PDMA_MCASP(0x4506),
+ PSIL_PDMA_MCASP(0x4507),
+ PSIL_PDMA_MCASP(0x4508),
+ /* PDMA8 (PDMA_MISC_G0) - SPI0-1 */
+ PSIL_PDMA_XY_PKT(0x4600),
+ PSIL_PDMA_XY_PKT(0x4601),
+ PSIL_PDMA_XY_PKT(0x4602),
+ PSIL_PDMA_XY_PKT(0x4603),
+ PSIL_PDMA_XY_PKT(0x4604),
+ PSIL_PDMA_XY_PKT(0x4605),
+ PSIL_PDMA_XY_PKT(0x4606),
+ PSIL_PDMA_XY_PKT(0x4607),
+ /* PDMA9 (PDMA_MISC_G1) - SPI2-3 */
+ PSIL_PDMA_XY_PKT(0x460c),
+ PSIL_PDMA_XY_PKT(0x460d),
+ PSIL_PDMA_XY_PKT(0x460e),
+ PSIL_PDMA_XY_PKT(0x460f),
+ PSIL_PDMA_XY_PKT(0x4610),
+ PSIL_PDMA_XY_PKT(0x4611),
+ PSIL_PDMA_XY_PKT(0x4612),
+ PSIL_PDMA_XY_PKT(0x4613),
+ /* PDMA10 (PDMA_MISC_G2) - SPI4-5 */
+ PSIL_PDMA_XY_PKT(0x4618),
+ PSIL_PDMA_XY_PKT(0x4619),
+ PSIL_PDMA_XY_PKT(0x461a),
+ PSIL_PDMA_XY_PKT(0x461b),
+ PSIL_PDMA_XY_PKT(0x461c),
+ PSIL_PDMA_XY_PKT(0x461d),
+ PSIL_PDMA_XY_PKT(0x461e),
+ PSIL_PDMA_XY_PKT(0x461f),
+ /* PDMA11 (PDMA_MISC_G3) */
+ PSIL_PDMA_XY_PKT(0x4624),
+ PSIL_PDMA_XY_PKT(0x4625),
+ PSIL_PDMA_XY_PKT(0x4626),
+ PSIL_PDMA_XY_PKT(0x4627),
+ PSIL_PDMA_XY_PKT(0x4628),
+ PSIL_PDMA_XY_PKT(0x4629),
+ PSIL_PDMA_XY_PKT(0x4630),
+ PSIL_PDMA_XY_PKT(0x463a),
+ /* PDMA13 (PDMA_USART_G0) - UART0-1 */
+ PSIL_PDMA_XY_PKT(0x4700),
+ PSIL_PDMA_XY_PKT(0x4701),
+ /* PDMA14 (PDMA_USART_G1) - UART2-3 */
+ PSIL_PDMA_XY_PKT(0x4702),
+ PSIL_PDMA_XY_PKT(0x4703),
+ /* PDMA15 (PDMA_USART_G2) - UART4-9 */
+ PSIL_PDMA_XY_PKT(0x4704),
+ PSIL_PDMA_XY_PKT(0x4705),
+ PSIL_PDMA_XY_PKT(0x4706),
+ PSIL_PDMA_XY_PKT(0x4707),
+ PSIL_PDMA_XY_PKT(0x4708),
+ PSIL_PDMA_XY_PKT(0x4709),
+ /* CPSW9 */
+ PSIL_ETHERNET(0x4a00),
+ /* CPSW0 */
+ PSIL_ETHERNET(0x7000),
+ /* MCU_PDMA0 (MCU_PDMA_MISC_G0) - SPI0 */
+ PSIL_PDMA_XY_PKT(0x7100),
+ PSIL_PDMA_XY_PKT(0x7101),
+ PSIL_PDMA_XY_PKT(0x7102),
+ PSIL_PDMA_XY_PKT(0x7103),
+ /* MCU_PDMA1 (MCU_PDMA_MISC_G1) - SPI1-2 */
+ PSIL_PDMA_XY_PKT(0x7200),
+ PSIL_PDMA_XY_PKT(0x7201),
+ PSIL_PDMA_XY_PKT(0x7202),
+ PSIL_PDMA_XY_PKT(0x7203),
+ PSIL_PDMA_XY_PKT(0x7204),
+ PSIL_PDMA_XY_PKT(0x7205),
+ PSIL_PDMA_XY_PKT(0x7206),
+ PSIL_PDMA_XY_PKT(0x7207),
+ /* MCU_PDMA2 (MCU_PDMA_MISC_G2) - UART0 */
+ PSIL_PDMA_XY_PKT(0x7300),
+ /* MCU_PDMA_ADC - ADC0-1 */
+ PSIL_PDMA_XY_TR(0x7400),
+ PSIL_PDMA_XY_TR(0x7401),
+ PSIL_PDMA_XY_TR(0x7402),
+ PSIL_PDMA_XY_TR(0x7403),
+ /* SA2UL */
+ PSIL_SA2UL(0x7500, 0),
+ PSIL_SA2UL(0x7501, 0),
+};
+
+/* PSI-L destination thread IDs, used for TX (DMA_MEM_TO_DEV) */
+struct psil_ep j721e_dst_ep_map[] = {
+ /* SA2UL */
+ PSIL_SA2UL(0xc000, 1),
+ PSIL_SA2UL(0xc001, 1),
+ /* PRU_ICSSG0 */
+ PSIL_ETHERNET(0xc100),
+ PSIL_ETHERNET(0xc101),
+ PSIL_ETHERNET(0xc102),
+ PSIL_ETHERNET(0xc103),
+ PSIL_ETHERNET(0xc104),
+ PSIL_ETHERNET(0xc105),
+ PSIL_ETHERNET(0xc106),
+ PSIL_ETHERNET(0xc107),
+ /* PRU_ICSSG1 */
+ PSIL_ETHERNET(0xc200),
+ PSIL_ETHERNET(0xc201),
+ PSIL_ETHERNET(0xc202),
+ PSIL_ETHERNET(0xc203),
+ PSIL_ETHERNET(0xc204),
+ PSIL_ETHERNET(0xc205),
+ PSIL_ETHERNET(0xc206),
+ PSIL_ETHERNET(0xc207),
+ /* CPSW9 */
+ PSIL_ETHERNET(0xca00),
+ PSIL_ETHERNET(0xca01),
+ PSIL_ETHERNET(0xca02),
+ PSIL_ETHERNET(0xca03),
+ PSIL_ETHERNET(0xca04),
+ PSIL_ETHERNET(0xca05),
+ PSIL_ETHERNET(0xca06),
+ PSIL_ETHERNET(0xca07),
+ /* CPSW0 */
+ PSIL_ETHERNET(0xf000),
+ PSIL_ETHERNET(0xf001),
+ PSIL_ETHERNET(0xf002),
+ PSIL_ETHERNET(0xf003),
+ PSIL_ETHERNET(0xf004),
+ PSIL_ETHERNET(0xf005),
+ PSIL_ETHERNET(0xf006),
+ PSIL_ETHERNET(0xf007),
+ /* SA2UL */
+ PSIL_SA2UL(0xf500, 1),
+};
+
+struct psil_ep_map j721e_ep_map = {
+ .name = "j721e",
+ .src = j721e_src_ep_map,
+ .src_count = ARRAY_SIZE(j721e_src_ep_map),
+ .dst = j721e_dst_ep_map,
+ .dst_count = ARRAY_SIZE(j721e_dst_ep_map),
+};
diff --git a/drivers/dma/ti/k3-psil-priv.h b/drivers/dma/ti/k3-psil-priv.h
new file mode 100644
index 000000000000..f74420653d8a
--- /dev/null
+++ b/drivers/dma/ti/k3-psil-priv.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com
+ */
+
+#ifndef K3_PSIL_PRIV_H_
+#define K3_PSIL_PRIV_H_
+
+#include <linux/dma/k3-psil.h>
+
+struct psil_ep {
+ u32 thread_id;
+ struct psil_endpoint_config ep_config;
+};
+
+/**
+ * struct psil_ep_map - PSI-L thread ID configuration maps
+ * @name: Name of the map, set it to the name of the SoC
+ * @src: Array of source PSI-L thread configurations
+ * @src_count: Number of entries in the src array
+ * @dst: Array of destination PSI-L thread configurations
+ * @dst_count: Number of entries in the dst array
+ *
+ * In case of symmetric configuration for a matching src/dst thread (for example
+ * 0x4400 and 0xc400) only the src configuration can be present. If no dst
+ * configuration found the code will look for (dst_thread_id & ~0x8000) to find
+ * the symmetric match.
+ */
+struct psil_ep_map {
+ char *name;
+ struct psil_ep *src;
+ int src_count;
+ struct psil_ep *dst;
+ int dst_count;
+};
+
+struct psil_endpoint_config *psil_get_ep_config(u32 thread_id);
+
+#endif /* K3_PSIL_PRIV_H_ */
diff --git a/drivers/dma/ti/k3-psil.c b/drivers/dma/ti/k3-psil.c
new file mode 100644
index 000000000000..47e5e06d3292
--- /dev/null
+++ b/drivers/dma/ti/k3-psil.c
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com
+ * Author: Peter Ujfalusi <peter.ujfalusi@...com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+
+#include "k3-psil-priv.h"
+
+extern struct psil_ep_map am654_ep_map;
+extern struct psil_ep_map j721e_ep_map;
+
+static DEFINE_MUTEX(ep_map_mutex);
+static struct psil_ep_map *soc_ep_map;
+
+struct psil_endpoint_config *psil_get_ep_config(u32 thread_id)
+{
+ int i;
+
+ mutex_lock(&ep_map_mutex);
+ if (!soc_ep_map) {
+ if (of_machine_is_compatible("ti,am654")) {
+ soc_ep_map = &am654_ep_map;
+ } else if (of_machine_is_compatible("ti,j721e")) {
+ soc_ep_map = &j721e_ep_map;
+ } else {
+ pr_err("PSIL: No compatible machine found for map\n");
+ return ERR_PTR(-ENOTSUPP);
+ }
+ pr_debug("%s: Using map for %s\n", __func__, soc_ep_map->name);
+ }
+ mutex_unlock(&ep_map_mutex);
+
+ if (thread_id & K3_PSIL_DST_THREAD_ID_OFFSET && soc_ep_map->dst) {
+ /* check in destination thread map */
+ for (i = 0; i < soc_ep_map->dst_count; i++) {
+ if (soc_ep_map->dst[i].thread_id == thread_id)
+ return &soc_ep_map->dst[i].ep_config;
+ }
+ }
+
+ thread_id &= ~K3_PSIL_DST_THREAD_ID_OFFSET;
+ if (soc_ep_map->src) {
+ for (i = 0; i < soc_ep_map->src_count; i++) {
+ if (soc_ep_map->src[i].thread_id == thread_id)
+ return &soc_ep_map->src[i].ep_config;
+ }
+ }
+
+ return ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL_GPL(psil_get_ep_config);
+
+int psil_set_new_ep_config(struct device *dev, const char *name,
+ struct psil_endpoint_config *ep_config)
+{
+ struct psil_endpoint_config *dst_ep_config;
+ struct of_phandle_args dma_spec;
+ u32 thread_id;
+ int index;
+
+ if (!dev || !dev->of_node)
+ return -EINVAL;
+
+ index = of_property_match_string(dev->of_node, "dma-names", name);
+ if (index < 0)
+ return index;
+
+ if (of_parse_phandle_with_args(dev->of_node, "dmas", "#dma-cells",
+ index, &dma_spec))
+ return -ENOENT;
+
+ thread_id = dma_spec.args[0];
+
+ dst_ep_config = psil_get_ep_config(thread_id);
+ if (IS_ERR(dst_ep_config)) {
+ pr_err("PSIL: thread ID 0x%04x not defined in map\n",
+ thread_id);
+ of_node_put(dma_spec.np);
+ return PTR_ERR(dst_ep_config);
+ }
+
+ memcpy(dst_ep_config, ep_config, sizeof(*dst_ep_config));
+
+ of_node_put(dma_spec.np);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(psil_set_new_ep_config);
+
+MODULE_DESCRIPTION("TI K3 PSI-L endpoint database");
+MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@...com>");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/dma/k3-psil.h b/include/linux/dma/k3-psil.h
new file mode 100644
index 000000000000..61d5cc0ad601
--- /dev/null
+++ b/include/linux/dma/k3-psil.h
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com
+ */
+
+#ifndef K3_PSIL_H_
+#define K3_PSIL_H_
+
+#include <linux/types.h>
+
+#define K3_PSIL_DST_THREAD_ID_OFFSET 0x8000
+
+struct device;
+
+/**
+ * enum udma_tp_level - Channel Throughput Levels
+ * @UDMA_TP_NORMAL: Normal channel
+ * @UDMA_TP_HIGH: High Throughput channel
+ * @UDMA_TP_ULTRAHIGH: Ultra High Throughput channel
+ */
+enum udma_tp_level {
+ UDMA_TP_NORMAL = 0,
+ UDMA_TP_HIGH,
+ UDMA_TP_ULTRAHIGH,
+ UDMA_TP_LAST,
+};
+
+/**
+ * enum psil_endpoint_type - PSI-L Endpoint type
+ * @PSIL_EP_NATIVE: Normal channel
+ * @PSIL_EP_PDMA_XY: XY mode PDMA
+ * @PSIL_EP_PDMA_MCAN: MCAN mode PDMA
+ * @PSIL_EP_PDMA_AASRC: AASRC mode PDMA
+ */
+enum psil_endpoint_type {
+ PSIL_EP_NATIVE = 0,
+ PSIL_EP_PDMA_XY,
+ PSIL_EP_PDMA_MCAN,
+ PSIL_EP_PDMA_AASRC,
+};
+
+/**
+ * struct psil_endpoint_config - PSI-L Endpoint configuration
+ * @ep_type: PSI-L endpoint type
+ * @pkt_mode: If set, the channel must be in Packet mode, otherwise in
+ * TR mode
+ * @notdpkt: TDCM must be suppressed on the TX channel
+ * @needs_epib: Endpoint needs EPIB
+ * @psd_size: If set, PSdata is used by the endpoint
+ * @channel_tpl: Desired throughput level for the channel
+ * @pdma_acc32: ACC32 must be enabled on the PDMA side
+ * @pdma_burst: BURST must be enabled on the PDMA side
+ */
+struct psil_endpoint_config {
+ enum psil_endpoint_type ep_type;
+
+ unsigned pkt_mode:1;
+ unsigned notdpkt:1;
+ unsigned needs_epib:1;
+ u32 psd_size;
+ enum udma_tp_level channel_tpl;
+
+ /* PDMA properties, valid for PSIL_EP_PDMA_* */
+ unsigned pdma_acc32:1;
+ unsigned pdma_burst:1;
+};
+
+int psil_set_new_ep_config(struct device *dev, const char *name,
+ struct psil_endpoint_config *ep_config);
+
+#endif /* K3_PSIL_H_ */
--
Peter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Powered by blists - more mailing lists