| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20191209183511.3576038-8-daniel@zonque.org>
Date: Mon, 9 Dec 2019 19:35:07 +0100
From: Daniel Mack <daniel@...que.org>
To: linux-kernel@...r.kernel.org, linux-gpio@...r.kernel.org,
linux-i2c@...r.kernel.org, alsa-devel@...a-project.org,
devicetree@...r.kernel.org, linux-clk@...r.kernel.org
Cc: mturquette@...libre.com, sboyd@...nel.org, robh+dt@...nel.org,
broonie@...nel.org, lee.jones@...aro.org, lars@...afoo.de,
pascal.huerst@...il.com, Daniel Mack <daniel@...que.org>
Subject: [PATCH 06/10] mfd: Add core driver for AD242x A2B transceivers
The core driver for these devices is split into several parts.
The master node driver is an I2C client. It is responsible for
bringing up the bus topology and discovering the slave nodes.
This process requries some knowlegde of the slave node configuration
to program the bus timings correctly, so the master drivers walks
the tree of nodes in the devicetree. The slave driver handles platform
devices that are instantiated by the master node driver after
discovery has finished.
Master nodes expose two addresses on the I2C bus, one (referred to as
'BASE' in the datasheet) for accessing registers on the transceiver
node itself, and one (referred to as 'BUS') for accessing remote
registers, either on the remote transceiver itself, or on I2C hardware
connected to that remote transceiver, which then acts as a remote I2C
bus master.
In order to allow MFD sub-devices to be registered as children of
either the master or any slave node, the details on how to access the
registers are hidden behind a regmap config. A pointer to the regmap
is then exposed in the struct shared with the sub-devices.
The ad242x-bus driver is a simple proxy that occupies the BUS I2C
address and which is referred to through a devicetree handle by the
master driver.
For the discovery process, the driver has to wait for an interrupt
to occur. In case no interrupt is configured in DT, the driver falls
back to interrupt polling. After the discovery phase is completed,
interrupts are only needed for error handling and GPIO handling,
both of which is not currenty implemented.
Code common to both the master and the slave driver lives in
'ad242x-node.c'.
Signed-off-by: Daniel Mack <daniel@...que.org>
mfd
---
drivers/mfd/Kconfig | 11 +
drivers/mfd/Makefile | 1 +
drivers/mfd/ad242x-bus.c | 42 +++
drivers/mfd/ad242x-master.c | 611 ++++++++++++++++++++++++++++++++++++
drivers/mfd/ad242x-node.c | 262 ++++++++++++++++
drivers/mfd/ad242x-slave.c | 234 ++++++++++++++
include/linux/mfd/ad242x.h | 400 +++++++++++++++++++++++
7 files changed, 1561 insertions(+)
create mode 100644 drivers/mfd/ad242x-bus.c
create mode 100644 drivers/mfd/ad242x-master.c
create mode 100644 drivers/mfd/ad242x-node.c
create mode 100644 drivers/mfd/ad242x-slave.c
create mode 100644 include/linux/mfd/ad242x.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 420900852166..727a35053d8c 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -99,6 +99,17 @@ config PMIC_ADP5520
individual components like LCD backlight, LEDs, GPIOs and Kepad
under the corresponding menus.
+config MFD_AD242X
+ bool "Analog Devices AD242x A2B support"
+ select MFD_CORE
+ select REGMAP_I2C
+ depends on I2C=y && OF
+ help
+ If you say yes here, you get support for devices from the AD242x
+ familiy. This driver provides common support for accessing the
+ devices, additional drivers must be enabled in order to use the
+ functionality of the devices.
+
config MFD_AAT2870_CORE
bool "AnalogicTech AAT2870"
select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index aed99f08739f..2361c676f6c8 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -203,6 +203,7 @@ obj-$(CONFIG_MFD_SPMI_PMIC) += qcom-spmi-pmic.o
obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o
obj-$(CONFIG_MFD_TPS65090) += tps65090.o
obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o
+obj-$(CONFIG_MFD_AD242X) += ad242x-master.o ad242x-slave.o ad242x-bus.o ad242x-node.o
obj-$(CONFIG_MFD_AT91_USART) += at91-usart.o
obj-$(CONFIG_MFD_ATMEL_FLEXCOM) += atmel-flexcom.o
obj-$(CONFIG_MFD_ATMEL_HLCDC) += atmel-hlcdc.o
diff --git a/drivers/mfd/ad242x-bus.c b/drivers/mfd/ad242x-bus.c
new file mode 100644
index 000000000000..6660e13ce43d
--- /dev/null
+++ b/drivers/mfd/ad242x-bus.c
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/mfd/ad242x.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+static int ad242x_bus_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ dev_set_drvdata(&i2c->dev, i2c);
+ i2c_set_clientdata(i2c, &i2c->dev);
+ return 0;
+}
+
+static const struct of_device_id ad242x_bus_of_match[] = {
+ { .compatible = "adi,ad2428w-bus" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, ad242x_bus_of_match);
+
+static const struct i2c_device_id ad242x_bus_i2c_id[] = {
+ { "ad242x_bus", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, ad242x_bus_i2c_id);
+
+static struct i2c_driver ad242x_bus_i2c_driver = {
+ .driver = {
+ .name = "ad242x-bus",
+ .of_match_table = ad242x_bus_of_match,
+ },
+ .probe = ad242x_bus_i2c_probe,
+ .id_table = ad242x_bus_i2c_id,
+};
+
+module_i2c_driver(ad242x_bus_i2c_driver);
+
+MODULE_DESCRIPTION("AD242x bus driver");
+MODULE_AUTHOR("Daniel Mack <daniel@...que.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/ad242x-master.c b/drivers/mfd/ad242x-master.c
new file mode 100644
index 000000000000..1b0bf90442a2
--- /dev/null
+++ b/drivers/mfd/ad242x-master.c
@@ -0,0 +1,611 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/mfd/ad242x.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+struct ad242x_master {
+ struct ad242x_node node;
+ struct clk *sync_clk;
+ struct completion run_completion;
+ struct completion discover_completion;
+ struct ad242x_i2c_bus bus;
+ unsigned int up_slot_size;
+ unsigned int dn_slot_size;
+ bool up_slot_alt_fmt;
+ bool dn_slot_alt_fmt;
+ unsigned int sync_clk_rate;
+ int irq;
+ u8 response_cycles;
+};
+
+struct ad242x_node *ad242x_master_get_node(struct ad242x_master *master)
+{
+ return &master->node;
+}
+EXPORT_SYMBOL_GPL(ad242x_master_get_node);
+
+struct ad242x_i2c_bus *ad242x_master_get_bus(struct ad242x_master *master)
+{
+ return &master->bus;
+}
+EXPORT_SYMBOL_GPL(ad242x_master_get_bus);
+
+const char *ad242x_master_get_clk_name(struct ad242x_master *master)
+{
+ return __clk_get_name(master->sync_clk);
+}
+EXPORT_SYMBOL_GPL(ad242x_master_get_clk_name);
+
+unsigned int ad242x_master_get_clk_rate(struct ad242x_master *master)
+{
+ return master->sync_clk_rate;
+}
+EXPORT_SYMBOL_GPL(ad242x_master_get_clk_rate);
+
+static int ad242x_read_one_irq(struct ad242x_master *master)
+{
+ struct regmap *regmap = master->node.regmap;
+ struct device *dev = master->node.dev;
+ unsigned int val, inttype;
+ int ret;
+
+ ret = regmap_read(regmap, AD242X_INTSTAT, &val);
+ if (ret < 0) {
+ dev_err(dev, "unable to read INTSTAT register: %d\n", ret);
+ return ret;
+ }
+
+ if (!(val & AD242X_INTSTAT_IRQ))
+ return -ENOENT;
+
+ ret = regmap_read(regmap, AD242X_INTTYPE, &inttype);
+ if (ret < 0) {
+ dev_err(dev, "unable to read INTTYPE register: %d\n", ret);
+ return ret;
+ }
+
+ ret = regmap_read(regmap, AD242X_INTSRC, &val);
+ if (ret < 0) {
+ dev_err(dev, "unable to read INTSRC register: %d\n", ret);
+ return ret;
+ }
+
+ ret = regmap_read(regmap, AD242X_INTPND0, &val);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_write(regmap, AD242X_INTPND0, val);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_read(regmap, AD242X_INTPND1, &val);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_write(regmap, AD242X_INTPND1, val);
+ if (ret < 0)
+ return ret;
+
+ if (val & AD242X_INTSRC_MSTINT) {
+ ret = regmap_read(regmap, AD242X_INTPND2, &val);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_write(regmap, AD242X_INTPND2, val);
+ if (ret < 0)
+ return ret;
+ }
+
+ dev_err(dev, "%s() inttype: 0x%02x\n", __func__, inttype);
+
+ switch (inttype) {
+ case AD242X_INTTYPE_DSCDONE:
+ complete(&master->discover_completion);
+ break;
+ case AD242X_INTTYPE_MSTR_RUNNING:
+ complete(&master->run_completion);
+ break;
+ default:
+ dev_info(dev, "Unhandled interrupt type 0x%02x\n", inttype);
+ }
+
+ return 0;
+}
+
+static int ad242x_read_irqs(struct ad242x_master *master)
+{
+ int ret;
+ bool first = true;
+
+ while (true) {
+ ret = ad242x_read_one_irq(master);
+ if (ret < 0)
+ return ret;
+ if (ret == -ENOENT)
+ return first ? ret : 0;
+
+ first = false;
+ }
+}
+
+static irqreturn_t ad242x_handle_irq(int irq, void *devid)
+{
+ struct ad242x_master *master = devid;
+ int ret;
+
+ ret = ad242x_read_irqs(master);
+ if (ret == -ENOENT)
+ return IRQ_NONE;
+
+ return IRQ_HANDLED;
+}
+
+static int ad242x_wait_for_irq(struct ad242x_master *master,
+ struct completion *completion,
+ unsigned int timeout)
+{
+ int ret;
+
+ if (master->irq > 0) {
+ ret = wait_for_completion_timeout(completion,
+ msecs_to_jiffies(timeout));
+ } else {
+ usleep_range(timeout * 1000, timeout * 1500);
+ ad242x_read_irqs(master);
+ ret = completion_done(completion);
+ }
+
+ return ret == 0 ? -ETIMEDOUT : 0;
+}
+
+/* See Table 3-2 in the datasheet */
+static unsigned int ad242x_bus_bits(unsigned int slot_size, bool alt_fmt)
+{
+ int alt_bits[8] = { 0, 13, 17, 21, 30, 0, 39, 0 };
+ int idx = AD242X_SLOTFMT_DNSIZE(slot_size);
+
+ return alt_fmt ? alt_bits[idx] : slot_size + 1;
+}
+
+/* See Table 9-1 in the datasheet */
+static unsigned int ad242x_master_respoffs(struct ad242x_node *node)
+{
+ if (node->tdm_mode == 2 && node->tdm_slot_size == 16)
+ return 238;
+
+ if ((node->tdm_mode == 2 && node->tdm_slot_size == 32) ||
+ (node->tdm_mode == 4 && node->tdm_slot_size == 16))
+ return 245;
+
+ return 248;
+}
+
+static int ad242x_discover(struct ad242x_master *master,
+ struct device_node *nodes_np)
+{
+ struct regmap *regmap = master->node.regmap;
+ struct device *dev = master->node.dev;
+ struct device_node *child_np;
+ unsigned int val, n = 0, i, respoffs, respcycs;
+ unsigned int respcycs_up_min = UINT_MAX;
+ unsigned int respcycs_dn_max = 0;
+ unsigned int master_up_slots = 0;
+ unsigned int master_dn_slots = 0;
+ bool up_enabled = false, dn_enabled = false;
+ uint8_t slave_control = 0;
+ int ret;
+
+ respoffs = ad242x_master_respoffs(&master->node);
+
+ for_each_available_child_of_node(nodes_np, child_np) {
+ unsigned int dnslot_activity, upslot_activity;
+ unsigned int slave_dn_slots, slave_up_slots;
+ unsigned int respcycs_dn, respcycs_up;
+ struct ad242x_slot_config slot_config;
+
+ ret = ad242x_read_slot_config(dev, child_np, &slot_config);
+ if (ret < 0) {
+ dev_err(dev, "slot config of slave %d is invalid\n", n);
+ return ret;
+ }
+
+ /* See section 3-18 in the datasheet */
+ slave_dn_slots = max_t(int, slot_config.dn_n_forward_slots,
+ fls(slot_config.dn_rx_slots));
+ slave_up_slots = max_t(int, slot_config.up_n_forward_slots,
+ fls(slot_config.up_rx_slots));
+
+ if (n == 0) {
+ master_up_slots = slave_up_slots;
+ master_dn_slots = slave_dn_slots;
+ }
+
+ /* See Appendix B in the datasheet */
+ dnslot_activity = slave_dn_slots *
+ ad242x_bus_bits(master->dn_slot_size,
+ master->dn_slot_alt_fmt);
+ upslot_activity = slave_up_slots *
+ ad242x_bus_bits(master->up_slot_size,
+ master->up_slot_alt_fmt);
+
+ respcycs_dn = DIV_ROUND_UP(64 + dnslot_activity, 4) + 4*n + 2;
+ respcycs_up = respoffs -
+ (DIV_ROUND_UP(64 + upslot_activity, 4) + 1);
+
+ if (respcycs_dn > respcycs_dn_max)
+ respcycs_dn_max = respcycs_dn;
+
+ if (respcycs_up < respcycs_up_min)
+ respcycs_up_min = respcycs_up;
+
+ if (slave_dn_slots > 0)
+ dn_enabled = true;
+
+ if (slave_up_slots > 0)
+ up_enabled = true;
+
+ n++;
+ }
+
+ if (n == 0) {
+ dev_err(dev, "No child nodes specified\n");
+ return -EINVAL;
+ }
+
+ if (of_property_read_bool(dev->of_node, "adi,invert-xcvr-b")) {
+ ret = regmap_update_bits(regmap, AD242X_CONTROL,
+ AD242X_CONTROL_XCVRBINV,
+ AD242X_CONTROL_XCVRBINV);
+ if (ret < 0)
+ return ret;
+
+ slave_control = AD242X_CONTROL_XCVRBINV;
+ }
+
+ if (respcycs_dn_max > respcycs_up_min) {
+ dev_err(dev, "Unsupported bus topology\n");
+ return -EINVAL;
+ }
+
+ respcycs = (respcycs_dn_max + respcycs_up_min) / 2;
+ ret = regmap_write(regmap, AD242X_RESPCYCS, respcycs);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_update_bits(regmap, AD242X_CONTROL,
+ AD242X_CONTROL_NEWSTRCT,
+ AD242X_CONTROL_NEWSTRCT);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_write(regmap, AD242X_SWCTL, AD242X_SWCTL_ENSW);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < n; i++) {
+ ret = regmap_write(regmap, AD242X_DISCVRY, respcycs - (4*i));
+ if (ret < 0)
+ return ret;
+
+ ret = ad242x_wait_for_irq(master,
+ &master->discover_completion, 35);
+ if (ret < 0) {
+ dev_err(dev, "Discovery of node %d timed out\n", i);
+ return ret;
+ }
+
+ val = AD242X_SWCTL_MODE(2) | AD242X_SWCTL_ENSW;
+
+ if (i == 0)
+ ret = regmap_write(regmap, AD242X_SWCTL, val);
+ else
+ ret = ad242x_slave_write(&master->bus, regmap, i,
+ AD242X_SWCTL, val);
+
+ if (ret < 0)
+ return ret;
+
+ dev_info(dev, "Node %d discovered\n", i);
+
+ /* Last node? */
+ if (i == n - 1)
+ break;
+
+ ret = ad242x_slave_write(&master->bus, regmap, i,
+ AD242X_INTMSK2,
+ AD242X_INTMSK2_DSCDIEN);
+ if (ret < 0)
+ return ret;
+
+ ret = ad242x_slave_write(&master->bus, regmap, i,
+ AD242X_CONTROL, slave_control);
+ if (ret < 0)
+ return ret;
+
+ ret = ad242x_slave_write(&master->bus, regmap, i,
+ AD242X_SWCTL, AD242X_SWCTL_ENSW);
+ if (ret < 0)
+ return ret;
+
+ reinit_completion(&master->discover_completion);
+ }
+
+ ret = regmap_write(regmap, AD242X_DNSLOTS, master_dn_slots);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_write(regmap, AD242X_UPSLOTS, master_up_slots);
+ if (ret < 0)
+ return ret;
+
+ val = 0;
+ if (dn_enabled)
+ val |= AD242X_DATCTL_DNS;
+
+ if (up_enabled)
+ val |= AD242X_DATCTL_UPS;
+
+ ret = regmap_write(regmap, AD242X_DATCTL, val);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int ad242x_init_irq(struct ad242x_master *master)
+{
+ struct regmap *regmap = master->node.regmap;
+ struct device *dev = master->node.dev;
+ int ret;
+
+ if (master->irq > 0) {
+ ret = devm_request_threaded_irq(dev, master->irq, NULL,
+ ad242x_handle_irq, IRQF_ONESHOT,
+ dev_name(dev), master);
+ if (ret < 0)
+ return ret;
+ }
+
+ ret = regmap_write(regmap, AD242X_INTMSK0,
+ AD242X_INTMSK0_SRFEIEN | AD242X_INTMSK0_BECIEN |
+ AD242X_INTMSK0_PWREIEN | AD242X_INTMSK0_CRCEIEN |
+ AD242X_INTMSK0_DDEIEN | AD242X_INTMSK0_HCEIEN);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_write(regmap, AD242X_INTMSK2,
+ AD242X_INTMSK2_DSCDIEN | AD242X_INTMSK2_SLVIRQEN);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static const struct regmap_config ad242x_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .volatile_reg = ad242x_is_volatile_reg,
+ .writeable_reg = ad242x_is_writeable_reg,
+ .max_register = AD242X_MAX_REG,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static int ad242x_master_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct device_node *bus_np, *nodes_np, *np;
+ struct device *busdev, *dev = &i2c->dev;
+ struct ad242x_master *master;
+ struct regmap *regmap;
+ unsigned int val;
+ int ret;
+
+ nodes_np = of_get_child_by_name(dev->of_node, "nodes");
+ if (!nodes_np) {
+ dev_err(dev, "no 'nodes' property given\n");
+ return -EINVAL;
+ }
+
+ bus_np = of_parse_phandle(dev->of_node, "adi,a2b-bus", 0);
+ if (!bus_np) {
+ dev_err(dev, "no 'adi,a2b-bus' handle specified for master node\n");
+ return -EINVAL;
+ }
+
+ busdev = bus_find_device_by_of_node(&i2c_bus_type, bus_np);
+ if (!busdev) {
+ dev_err(dev, "'adi,a2b-bus' handle invalid\n");
+ return -EINVAL;
+ }
+
+ master = devm_kzalloc(dev, sizeof(struct ad242x_master), GFP_KERNEL);
+ if (!master)
+ return -ENOMEM;
+
+ mutex_init(&master->bus.mutex);
+ init_completion(&master->run_completion);
+ init_completion(&master->discover_completion);
+ dev_set_drvdata(dev, &master->node);
+ i2c_set_clientdata(i2c, master);
+
+ regmap = devm_regmap_init_i2c(i2c, &ad242x_regmap_config);
+ if (IS_ERR(regmap)) {
+ ret = PTR_ERR(regmap);
+ dev_err(dev, "regmap init failed: %d\n", ret);
+ return ret;
+ }
+
+ master->bus.client = to_i2c_client(busdev);
+ master->node.regmap = regmap;
+ master->node.dev = dev;
+ master->node.master = master;
+ master->node.id = AD242X_MASTER_ID;
+ master->irq = i2c->irq;
+
+ master->sync_clk = devm_clk_get(dev, "sync");
+ if (IS_ERR(master->sync_clk)) {
+ ret = PTR_ERR(master->sync_clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "failed to get sync clk: %d\n", ret);
+
+ return ret;
+ }
+
+ if (of_property_read_u32(dev->of_node, "clock-frequency",
+ &master->sync_clk_rate)) {
+ ret = clk_set_rate(master->sync_clk, master->sync_clk_rate);
+ if (ret < 0) {
+ dev_err(dev, "Cannot set sync clock rate: %d\n", ret);
+ return ret;
+ }
+ }
+
+ master->sync_clk_rate = clk_get_rate(master->sync_clk);
+ if (master->sync_clk_rate != 44100 && master->sync_clk_rate != 48000) {
+ dev_err(dev, "SYNC clock rate %d is invalid\n",
+ master->sync_clk_rate);
+ return -EINVAL;
+ }
+
+ ret = clk_prepare_enable(master->sync_clk);
+ if (ret < 0) {
+ dev_err(dev, "failed to enable sync clk: %d\n", ret);
+ return ret;
+ }
+
+ /* Master node setup */
+
+ ret = regmap_write(regmap, AD242X_CONTROL,
+ AD242X_CONTROL_MSTR | AD242X_CONTROL_SOFTRST);
+ if (ret < 0)
+ return ret;
+
+ ret = ad242x_wait_for_irq(master, &master->run_completion, 10);
+ if (ret < 0) {
+ dev_err(dev, "timeout waiting for PLL sync: %d\n", ret);
+ return ret;
+ }
+
+ ret = regmap_update_bits(regmap, AD242X_CONTROL,
+ AD242X_CONTROL_SOFTRST, 0);
+ if (ret < 0)
+ return ret;
+
+ ret = ad242x_node_probe(&master->node);
+ if (ret < 0)
+ return ret;
+
+ ret = ad242x_init_irq(master);
+ if (ret < 0) {
+ dev_err(dev, "Unable to set up IRQ: %d", ret);
+ return ret;
+ }
+
+ /* Slot format setup */
+
+ of_property_read_u32(dev->of_node, "adi,upstream-slot-size", &val);
+ if (val < 8 || val > 32 || (val % 4 != 0)) {
+ dev_err(dev, "invalid upstream-slot-size %d\n", val);
+ return -EINVAL;
+ }
+ master->up_slot_size = val;
+
+ of_property_read_u32(dev->of_node, "adi,downstream-slot-size", &val);
+ if (val < 8 || val > 32 || (val % 4 != 0)) {
+ dev_err(dev, "invalid downstream-slot-size %d\n", val);
+ return -EINVAL;
+ }
+ master->dn_slot_size = val;
+
+ master->dn_slot_alt_fmt =
+ of_property_read_bool(dev->of_node,
+ "adi,alternate-downstream-slot-format");
+ master->up_slot_alt_fmt =
+ of_property_read_bool(dev->of_node,
+ "adi,alternate-upstream-slot-format");
+
+ val = AD242X_SLOTFMT_DNSIZE(master->dn_slot_size) |
+ AD242X_SLOTFMT_UPSIZE(master->up_slot_size);
+
+ if (master->dn_slot_alt_fmt)
+ val |= AD242X_SLOTFMT_DNFMT;
+
+ if (master->up_slot_alt_fmt)
+ val |= AD242X_SLOTFMT_UPFMT;
+
+ ret = regmap_write(regmap, AD242X_SLOTFMT, val);
+ if (ret < 0)
+ return ret;
+
+ /* Node discovery and MFD setup */
+
+ ret = ad242x_discover(master, nodes_np);
+ if (ret < 0) {
+ dev_err(dev, "error discovering nodes: %d\n", ret);
+ return ret;
+ }
+
+ ret = ad242x_node_add_mfd_cells(dev);
+ if (ret < 0) {
+ dev_err(dev, "failed to add MFD devices %d\n", ret);
+ return ret;
+ }
+
+ /* Register platform devices for nodes */
+
+ for_each_available_child_of_node(nodes_np, np)
+ of_platform_device_create(np, NULL, dev);
+
+ of_node_put(nodes_np);
+
+ return 0;
+}
+
+static int ad242x_master_remove(struct i2c_client *i2c)
+{
+ struct ad242x_master *master = i2c_get_clientdata(i2c);
+
+ if (master->sync_clk)
+ clk_disable_unprepare(master->sync_clk);
+
+ return 0;
+}
+
+static const struct of_device_id ad242x_master_of_match[] = {
+ { .compatible = "adi,ad2428w-master" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ad242x_master_of_match);
+
+static const struct i2c_device_id ad242x_master_i2c_id[] = {
+ {"ad242x-master", 0},
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ad242x_master_i2c_id);
+
+static struct i2c_driver ad242x_master_i2c_driver = {
+ .driver = {
+ .name = "ad242x-master",
+ .of_match_table = ad242x_master_of_match,
+ },
+ .probe = ad242x_master_probe,
+ .remove = ad242x_master_remove,
+ .id_table = ad242x_master_i2c_id,
+};
+
+module_i2c_driver(ad242x_master_i2c_driver);
+
+MODULE_DESCRIPTION("AD242x master master driver");
+MODULE_AUTHOR("Daniel Mack <daniel@...que.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/ad242x-node.c b/drivers/mfd/ad242x-node.c
new file mode 100644
index 000000000000..f9db689380a7
--- /dev/null
+++ b/drivers/mfd/ad242x-node.c
@@ -0,0 +1,262 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/ad242x.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+/* See Table 7-43 in the datasheet */
+static int ad242x_tdmmode_index(unsigned int mode, bool slave)
+{
+ switch (mode) {
+ case 2:
+ return 0;
+ case 4:
+ return 1;
+ case 8:
+ return 2;
+ case 12:
+ return slave ? -EINVAL : 3;
+ case 16:
+ return 4;
+ case 20:
+ return slave ? -EINVAL : 5;
+ case 24:
+ return slave ? -EINVAL : 6;
+ case 32:
+ return 7;
+ default:
+ return -EINVAL;
+ }
+}
+
+int ad242x_node_probe(struct ad242x_node *node)
+{
+ struct device_node *np = node->dev->of_node;
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(node->regmap, AD242X_VENDOR, &val);
+ if (ret < 0) {
+ dev_err(node->dev, "failed to read VENDOR register %d\n", ret);
+ return ret;
+ }
+
+ if (val != 0xad) {
+ dev_err(node->dev, "bogus value 0x%02x in VENDOR register\n",
+ val);
+ return -ENODEV;
+ }
+
+ ret = regmap_read(node->regmap, AD242X_PRODUCT, &val);
+ if (ret < 0) {
+ dev_err(node->dev, "failed to read PRODUCT register %d\n",
+ ret);
+ return ret;
+ }
+
+ if (val != 0x28) {
+ dev_err(node->dev, "bogus value 0x%02x in PRODUCT register\n",
+ val);
+ return -ENODEV;
+ }
+
+ ret = regmap_read(node->regmap, AD242X_VERSION, &val);
+ if (ret < 0) {
+ dev_err(node->dev, "failed to read VERSION register %d\n", ret);
+ return ret;
+ }
+
+ if (node->id == AD242X_MASTER_ID)
+ dev_info(node->dev,
+ "Detected AD242x master node, version %d.%d\n",
+ val >> 4, val & 0xf);
+ else
+ dev_info(node->dev,
+ "Detected AD242x slave node, version %d.%d, id %d\n",
+ val >> 4, val & 0xf, node->id);
+
+ ret = regmap_read(node->regmap, AD242X_CAPABILITY, &val);
+ if (ret < 0) {
+ dev_err(node->dev, "failed to read CAPABILITY register %d\n",
+ ret);
+ return ret;
+ }
+
+ node->caps = val;
+
+ val = 0;
+
+ if (of_property_read_bool(np, "adi,spread-a2b-clock"))
+ val |= AD242X_PLLCTL_SSMODE_AB;
+ else if (of_property_read_bool(np, "adi,spread-a2b-i2s-clock"))
+ val |= AD242X_PLLCTL_SSMODE_AB_I2S;
+
+ if (of_property_read_bool(np, "adi,spread-spectrum-high"))
+ val |= AD242X_PLLCTL_SSDEPTH;
+
+ ret = regmap_write(node->regmap, AD242X_PLLCTL, val);
+ if (ret < 0) {
+ dev_err(node->dev, "failed to write PLLCTL register %d\n", ret);
+ return ret;
+ }
+
+ /* I2S global setup */
+
+ of_property_read_u32(np, "adi,tdm-mode", &node->tdm_mode);
+ of_property_read_u32(np, "adi,tdm-slot-size", &node->tdm_slot_size);
+
+ ret = ad242x_tdmmode_index(node->tdm_mode, false);
+ if (ret < 0) {
+ dev_err(node->dev, "invalid TDM mode %d\n", node->tdm_mode);
+ return -EINVAL;
+ }
+
+ val = AD242X_I2SGCTL_TDMMODE(ret);
+
+ if (node->tdm_slot_size == 16) {
+ val |= AD242X_I2SGCTL_TDMSS;
+ } else if (node->tdm_slot_size != 32) {
+ dev_err(node->dev, "invalid TDM slot size %d\n",
+ node->tdm_slot_size);
+ return -EINVAL;
+ }
+
+ if (of_property_read_bool(np, "adi,alternating-sync"))
+ val |= AD242X_I2SGCTL_ALT;
+
+ if (of_property_read_bool(np, "adi,early-sync"))
+ val |= AD242X_I2SGCTL_EARLY;
+
+ if (of_property_read_bool(np, "adi,invert-sync"))
+ val |= AD242X_I2SGCTL_INV;
+
+ ret = regmap_write(node->regmap, AD242X_I2SGCTL, val);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static const struct mfd_cell ad242x_mfd_cells[] = {
+ {
+ .of_compatible = "adi,ad2428w-i2c",
+ .name = "ad242x-i2c",
+ },
+ {
+ .of_compatible = "adi,ad2428w-gpio",
+ .name = "ad242x-gpio",
+ },
+ {
+ .of_compatible = "adi,ad2428w-clk",
+ .name = "ad242x-clk",
+ },
+ {
+ .of_compatible = "adi,ad2428w-codec",
+ .name = "ad242x-codec",
+ },
+};
+
+int ad242x_node_add_mfd_cells(struct device *dev)
+{
+ return devm_mfd_add_devices(dev, PLATFORM_DEVID_AUTO,
+ ad242x_mfd_cells,
+ ARRAY_SIZE(ad242x_mfd_cells),
+ NULL, 0, NULL);
+}
+
+static int ad242x_get_slot_mask(const struct device_node *np,
+ const char *propname, u32 *mask)
+{
+ unsigned int i, num;
+ int ret, proplen;
+ u32 slots[32];
+
+ if (!of_get_property(np, propname, &proplen))
+ return -ENOENT;
+
+ num = proplen / sizeof(u32);
+
+ if (num > ARRAY_SIZE(slots))
+ return -EOVERFLOW;
+
+ ret = of_property_read_u32_array(np, propname, slots, num);
+ if (ret < 0)
+ return ret;
+
+ *mask = 0;
+
+ for (i = 0; i < num; i++) {
+ if (slots[i] >= 32)
+ return -EINVAL;
+
+ *mask |= BIT(slots[i]);
+ }
+
+ return 0;
+}
+
+int ad242x_read_slot_config(struct device *dev,
+ struct device_node *np,
+ struct ad242x_slot_config *config)
+{
+ struct device_node *dn_np, *up_np;
+ int ret;
+
+ dn_np = of_get_child_by_name(np, "downstream");
+ if (!dn_np) {
+ dev_err(dev, "no downstream node\n");
+ return -EINVAL;
+ }
+
+ up_np = of_get_child_by_name(np, "upstream");
+ if (!dn_np) {
+ dev_err(dev, "no upstream node\n");
+ ret = -EINVAL;
+ goto err_put_dn_node;
+ }
+
+ ret = ad242x_get_slot_mask(dn_np, "rx-slots", &config->dn_rx_slots);
+ if (ret < 0 && ret != -ENOENT) {
+ dev_err(dev, "invalid downstream rx-slots property\n");
+ goto err_put_nodes;
+ }
+
+ of_property_read_u32(dn_np, "#tx-slots", &config->dn_n_tx_slots);
+ of_property_read_u32(dn_np, "#forward-slots",
+ &config->dn_n_forward_slots);
+ if (config->dn_n_tx_slots + config->dn_n_forward_slots >= 32) {
+ dev_err(dev, "invalid downstream tx-slots property\n");
+ goto err_put_nodes;
+ }
+
+
+ ret = ad242x_get_slot_mask(up_np, "rx-slots", &config->up_rx_slots);
+ if (ret < 0) {
+ dev_err(dev, "invalid upstream rx-slots property\n");
+ goto err_put_nodes;
+ }
+
+ of_property_read_u32(up_np, "#tx-slots", &config->up_n_tx_slots);
+ of_property_read_u32(up_np, "#forward-slots",
+ &config->up_n_forward_slots);
+ if (config->up_n_tx_slots + config->up_n_forward_slots >= 32) {
+ dev_err(dev, "invalid downstream tx-slots property\n");
+ goto err_put_nodes;
+ }
+
+err_put_nodes:
+ of_node_put(up_np);
+err_put_dn_node:
+ of_node_put(dn_np);
+
+ return ret;
+}
diff --git a/drivers/mfd/ad242x-slave.c b/drivers/mfd/ad242x-slave.c
new file mode 100644
index 000000000000..ad255d67a5b6
--- /dev/null
+++ b/drivers/mfd/ad242x-slave.c
@@ -0,0 +1,234 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/mfd/ad242x.h>
+#include <linux/mfd/core.h>
+#include <linux/mutex.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+struct ad242x_slave {
+ struct ad242x_node node;
+ struct ad242x_node *master;
+ struct ad242x_slot_config slot_config;
+ unsigned int sync_offset;
+};
+
+int ad242x_slave_read(struct ad242x_i2c_bus *bus,
+ struct regmap *master_regmap,
+ uint8_t node_id, uint8_t reg, unsigned int *val)
+{
+ int ret;
+
+ mutex_lock(&bus->mutex);
+
+ ret = regmap_write(master_regmap, AD242X_NODEADR, node_id);
+ if (ret < 0)
+ goto err_unlock;
+
+ ret = i2c_smbus_read_byte_data(bus->client, reg);
+ if (ret < 0)
+ goto err_unlock;
+
+ *val = ret;
+ ret = 0;
+
+err_unlock:
+ mutex_unlock(&bus->mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(ad242x_slave_read);
+
+int ad242x_slave_write(struct ad242x_i2c_bus *bus,
+ struct regmap *master_regmap,
+ uint8_t node_id, uint8_t reg, unsigned int val)
+{
+ int ret;
+
+ mutex_lock(&bus->mutex);
+
+ ret = regmap_write(master_regmap, AD242X_NODEADR, node_id);
+ if (ret < 0)
+ goto err_unlock;
+
+ ret = i2c_smbus_write_byte_data(bus->client, reg, val);
+ if (ret < 0)
+ goto err_unlock;
+
+ ret = 0;
+
+err_unlock:
+ mutex_unlock(&bus->mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(ad242x_slave_write);
+
+static int ad242x_slave_regmap_read(void *context, unsigned int reg,
+ unsigned int *val)
+{
+ struct ad242x_slave *slave = context;
+ struct ad242x_i2c_bus *bus = ad242x_master_get_bus(slave->node.master);
+ struct ad242x_node *mnode = ad242x_master_get_node(slave->node.master);
+
+ if (reg > 0xff)
+ return -EINVAL;
+
+ return ad242x_slave_read(bus, mnode->regmap, slave->node.id, reg, val);
+}
+
+static int ad242x_slave_regmap_write(void *context, unsigned int reg,
+ unsigned int val)
+{
+ struct ad242x_slave *slave = context;
+ struct ad242x_i2c_bus *bus = ad242x_master_get_bus(slave->node.master);
+ struct ad242x_node *mnode = ad242x_master_get_node(slave->node.master);
+
+ if (val > 0xff || reg > 0xff)
+ return -EINVAL;
+
+ return ad242x_slave_write(bus, mnode->regmap, slave->node.id, reg, val);
+}
+
+static const struct regmap_config ad242x_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .volatile_reg = ad242x_is_volatile_reg,
+ .writeable_reg = ad242x_is_writeable_reg,
+ .reg_read = ad242x_slave_regmap_read,
+ .reg_write = ad242x_slave_regmap_write,
+ .max_register = AD242X_MAX_REG,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static int ad242x_calc_sync_offset(unsigned int val)
+{
+ if (val == 0)
+ return 0;
+
+ if (val > 127)
+ return -EINVAL;
+
+ return 256 - val;
+}
+
+static int ad242x_slave_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ad242x_slave *slave;
+ struct ad242x_node *mnode;
+ struct regmap *regmap;
+ unsigned int val;
+ int i, ret;
+
+ slave = devm_kzalloc(dev, sizeof(*slave), GFP_KERNEL);
+ if (!slave)
+ return -ENOMEM;
+
+ regmap = devm_regmap_init(dev, NULL, slave, &ad242x_regmap_config);
+ if (IS_ERR(regmap)) {
+ ret = PTR_ERR(regmap);
+ dev_err(dev, "regmap init failed: %d\n", ret);
+ return ret;
+ }
+
+ of_property_read_u32(dev->of_node, "reg", &val);
+ slave->node.id = val;
+ slave->node.dev = dev;
+ slave->node.regmap = regmap;
+
+ mnode = dev_get_drvdata(dev->parent);
+ slave->node.master = mnode->master;
+
+ dev_set_name(dev, "%s-a2b-%d", dev_name(dev->parent), slave->node.id);
+ dev_set_drvdata(dev, &slave->node);
+
+ ret = ad242x_node_probe(&slave->node);
+ if (ret < 0)
+ return ret;
+
+ ret = ad242x_read_slot_config(dev, dev->of_node, &slave->slot_config);
+ if (ret < 0) {
+ dev_err(dev, "slot config is invalid: %d\n", ret);
+ return ret;
+ }
+
+ ret = regmap_write(regmap, AD242X_UPSLOTS,
+ slave->slot_config.up_n_forward_slots);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_write(regmap, AD242X_DNSLOTS,
+ slave->slot_config.dn_n_forward_slots);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_write(regmap, AD242X_LUPSLOTS,
+ slave->slot_config.up_n_tx_slots);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_write(regmap, AD242X_LDNSLOTS,
+ slave->slot_config.dn_n_tx_slots |
+ AD242X_LDNSLOTS_DNMASKEN);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < 4; i++) {
+ ret = regmap_write(regmap, AD242X_UPMASK(i),
+ (slave->slot_config.up_rx_slots >> (i * 8)) & 0xff);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_write(regmap, AD242X_DNMASK(i),
+ (slave->slot_config.dn_rx_slots >> (i * 8)) & 0xff);
+ if (ret < 0)
+ return ret;
+ }
+
+ of_property_read_u32(dev->of_node, "adi,sync-offset",
+ &slave->sync_offset);
+
+ ret = ad242x_calc_sync_offset(slave->sync_offset);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_write(regmap, AD242X_SYNCOFFSET, ret);
+ if (ret < 0)
+ return ret;
+
+ ret = ad242x_node_add_mfd_cells(dev);
+ if (ret < 0) {
+ dev_err(dev, "failed to add MFD devices %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct of_device_id ad242x_slave_of_match[] = {
+ { .compatible = "adi,ad2428w-slave" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ad242x_slave_of_match);
+
+static struct platform_driver ad242x_slave_driver = {
+ .driver = {
+ .name = "ad242x-slave",
+ .of_match_table = ad242x_slave_of_match,
+ },
+ .probe = ad242x_slave_probe,
+};
+
+module_platform_driver(ad242x_slave_driver);
+
+MODULE_DESCRIPTION("AD242x slave node driver");
+MODULE_AUTHOR("Daniel Mack <daniel@...que.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/ad242x.h b/include/linux/mfd/ad242x.h
new file mode 100644
index 000000000000..02a174824f85
--- /dev/null
+++ b/include/linux/mfd/ad242x.h
@@ -0,0 +1,400 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __LINUX_MFD_AD242X_H
+#define __LINUX_MFD_AD242X_H
+
+#define AD242X_CHIP 0x00
+#define AD242X_NODEADR 0x01
+#define AD242X_NODEADR_MASK 0x0f
+#define AD242X_NODEADR_PERI BIT(5)
+#define AD242X_NODEADR_BRCST BIT(7)
+
+#define AD242X_VENDOR 0x02
+#define AD242X_PRODUCT 0x03
+#define AD242X_VERSION 0x04
+
+#define AD242X_CAPABILITY 0x05
+#define AD242X_CAPABILITY_I2C BIT(0)
+
+#define AD242X_SWCTL 0x09
+#define AD242X_SWCTL_ENSW BIT(0)
+#define AD242X_SWCTL_DIAGMODE BIT(3)
+#define AD242X_SWCTL_MODE(X) (((X) & 3) << 4)
+#define AD242X_SWCTL_MODE_MASK (3 << 4)
+#define AD242X_SWCTL_DISNXT BIT(6)
+
+#define AD242X_BCDNSLOTS 0x0a
+#define AD242X_BCDNSLOTS_MASK 0x3f
+
+#define AD242X_LDNSLOTS 0x0b
+#define AD242X_LDNSLOTS_MASK 0x3f
+#define AD242X_LDNSLOTS_DNMASKEN BIT(7)
+
+#define AD242X_LUPSLOTS 0x0c
+#define AD242X_LUPSLOTS_MASK 0x3f
+
+#define AD242X_DNSLOTS 0x0d
+#define AD242X_DNSLOTS_MASK 0x3f
+
+#define AD242X_UPSLOTS 0x0e
+#define AD242X_UPSLOTS_MASK 0x3f
+
+#define AD242X_RESPCYCS 0x0f
+
+#define AD242X_SLOTFMT 0x10
+#define AD242X_SLOTFMT_DNSIZE(X) ((((X) - 8) >> 2) & 7)
+#define AD242X_SLOTFMT_DNFMT BIT(3)
+#define AD242X_SLOTFMT_UPSIZE(X) (((((X) - 8) >> 2) & 7) << 4)
+#define AD242X_SLOTFMT_UPFMT BIT(7)
+
+#define AD242X_DATCTL 0x11
+#define AD242X_DATCTL_DNS BIT(0)
+#define AD242X_DATCTL_UPS BIT(1)
+#define AD242X_DATCTL_ENDSNIFF BIT(5)
+#define AD242X_DATCTL_STANDBY BIT(7)
+
+#define AD242X_CONTROL 0x12
+#define AD242X_CONTROL_NEWSTRCT BIT(0)
+#define AD242X_CONTROL_ENDDSC BIT(1)
+#define AD242X_CONTROL_SOFTRST BIT(2)
+#define AD242X_CONTROL_SWBYP BIT(3)
+#define AD242X_CONTROL_XCVRBINV BIT(4)
+#define AD242X_CONTROL_MSTR BIT(7)
+
+#define AD242X_DISCVRY 0x13
+
+#define AD242X_SWSTAT 0x14
+#define AD242X_SWSTAT_FIN BIT(0)
+#define AD242X_SWSTAT_FAULT BIT(1)
+#define AD242X_SWSTAT_FAULTCODE(X) (((X) & 0x7) >> 4)
+#define AD242X_SWSTAT_FAULT_NLOC BIT(7)
+
+#define AD242X_INTSTAT 0x15
+#define AD242X_INTSTAT_IRQ BIT(0)
+
+#define AD242X_INTSRC 0x16
+#define AD242X_INTSRC_INODE 0x0f
+#define AD242X_INTSRC_SLVINT BIT(6)
+#define AD242X_INTSRC_MSTINT BIT(7)
+
+#define AD242X_INTTYPE 0x17
+
+#define AD242X_INTTYPE_DSCDONE 24
+#define AD242X_INTTYPE_MSTR_RUNNING 255
+
+#define AD242X_INTPND0 0x18
+#define AD242X_INTPDN0_HDCNTERR BIT(0)
+#define AD242X_INTPDN0_DDERR BIT(1)
+#define AD242X_INTPDN0_CRCERR BIT(2)
+#define AD242X_INTPDN0_DPERR BIT(3)
+#define AD242X_INTPDN0_PWRERR BIT(4)
+#define AD242X_INTPDN0_BECOVF BIT(5)
+#define AD242X_INTPDN0_SRFERR BIT(6)
+#define AD242X_INTPDN0_SRFCRCERR BIT(7)
+
+#define AD242X_INTPND1 0x19
+#define AD242X_INTPND1_IOPND(X) BIT(X)
+
+#define AD242X_INTPND2 0x1a
+#define AD242X_INTPND2_DSCDONE BIT(0)
+#define AD242X_INTPND2_I2CERR BIT(1)
+#define AD242X_INTPND2_ICRCERR BIT(2)
+#define AD242X_INTPND2_SLVIRQ BIT(3)
+
+#define AD242X_INTMSK0 0x1b
+#define AD242X_INTMSK0_HCEIEN BIT(0)
+#define AD242X_INTMSK0_DDEIEN BIT(1)
+#define AD242X_INTMSK0_CRCEIEN BIT(2)
+#define AD242X_INTMSK0_DPEIEN BIT(3)
+#define AD242X_INTMSK0_PWREIEN BIT(4)
+#define AD242X_INTMSK0_BECIEN BIT(5)
+#define AD242X_INTMSK0_SRFEIEN BIT(6)
+#define AD242X_INTMSK0_SRFCRCEIEN BIT(7)
+
+#define AD242X_INTMSK1 0x1c
+#define AD242X_INTMSK1_IOIRQEN(X) BIT(X)
+
+#define AD242X_INTMSK2 0x1d
+#define AD242X_INTMSK2_DSCDIEN BIT(0)
+#define AD242X_INTMSK2_I2CEIEN BIT(1)
+#define AD242X_INTMSK2_ICRCEIEN BIT(2)
+#define AD242X_INTMSK2_SLVIRQEN BIT(3)
+
+#define AD242X_BECCTL 0x1e
+#define AD242X_BECCTL_ENHDCNT BIT(0)
+#define AD242X_BECCTL_ENDD BIT(1)
+#define AD242X_BECCTL_ENCRC BIT(2)
+#define AD242X_BECCTL_ENDP BIT(3)
+#define AD242X_BECCTL_ENICRC BIT(4)
+#define AD242X_BECCTL_THRESHLD(X) ((X) >> 5)
+
+#define AD242X_BECNT 0x1f
+
+#define AD242X_TESTMODE 0x20
+#define AD242X_TESTMODE_PRBSUP BIT(0)
+#define AD242X_TESTMODE_PRBSDN BIT(1)
+#define AD242X_TESTMODE_PRBSN2N BIT(2)
+#define AD242X_TESTMODE_RXDPTH(X) ((X) >> 4)
+
+#define AD242X_ERRCNT0 0x21
+#define AD242X_ERRCNT1 0x22
+#define AD242X_ERRCNT2 0x23
+#define AD242X_ERRCNT3 0x24
+
+#define AD242X_NODE 0x29
+#define AD242X_NODE_MASK 0xf
+#define AD242X_NODE_DISCVD BIT(5)
+#define AD242X_NODE_NLAST BIT(6)
+#define AD242X_NODE_LAST BIT(7)
+
+#define AD242X_DISCSTAT 0x2b
+#define AD242X_DISCSTAT_DNODE(X) ((X) & 0xf)
+#define AD242X_DISCSTAT_DSCACT BIT(7)
+
+#define AD242X_TXACTL 0x2e
+#define AD242X_TXACTL_LEVEL_HIGH 0
+#define AD242X_TXACTL_LEVEL_MEDIUM 2
+#define AD242X_TXACTL_LEVEL_LOW 3
+
+#define AD242X_TXBCTL 0x30
+#define AD242X_TXBCTL_LEVEL_HIGH 0
+#define AD242X_TXBCTL_LEVEL_MEDIUM 2
+#define AD242X_TXBCTL_LEVEL_LOW 3
+
+#define AD242X_LINTTYPE 0x3e
+
+#define AD242X_I2CCFG 0x3f
+#define AD242X_I2CCFG_DATARATE BIT(0)
+#define AD242X_I2CCFG_EACK BIT(1)
+#define AD242X_I2CCFG_FRAMERATE BIT(2)
+
+#define AD242X_PLLCTL 0x40
+#define AD242X_PLLCTL_SSFREQ(X) ((X) & 3)
+#define AD242X_PLLCTL_SSDEPTH BIT(2)
+#define AD242X_PLLCTL_SSMODE_AB (1 << 6)
+#define AD242X_PLLCTL_SSMODE_AB_I2S (2 << 6)
+
+#define AD242X_I2SGCTL 0x41
+#define AD242X_I2SGCTL_TDMMODE(X) ((X) & 3)
+#define AD242X_I2SGCTL_RXONDTX1 BIT(3)
+#define AD242X_I2SGCTL_TDMSS BIT(4)
+#define AD242X_I2SGCTL_ALT BIT(5)
+#define AD242X_I2SGCTL_EARLY BIT(6)
+#define AD242X_I2SGCTL_INV BIT(7)
+
+#define AD242X_I2SCTL 0x42
+#define AD242X_I2SCTL_TX0EN BIT(0)
+#define AD242X_I2SCTL_TX1EN BIT(1)
+#define AD242X_I2SCTL_TX2PINTL BIT(2)
+#define AD242X_I2SCTL_TXBCLKINV BIT(3)
+#define AD242X_I2SCTL_RX0EN BIT(4)
+#define AD242X_I2SCTL_RX1EN BIT(5)
+#define AD242X_I2SCTL_RX2PINTL BIT(6)
+#define AD242X_I2SCTL_RXBCLKINV BIT(7)
+
+#define AD242X_I2SRATE 0x43
+#define AD242X_I2SRATE_I2SRATE(X) ((X) & 3)
+#define AD242X_I2SRATE_BCLKRATE(X) (((X) << 3) & 3)
+#define AD242X_I2SRATE_REDUCE BIT(6)
+#define AD242X_I2SRATE_SHARE BIT(7)
+
+#define AD242X_I2STXOFFSET 0x44
+#define AD242X_I2STXOFFSET_VAR(X) ((X) & 0x3f)
+#define AD242X_I2STXOFFSET_TSAFTER BIT(6)
+#define AD242X_I2STXOFFSET_TSBEFORE BIT(7)
+
+#define AD242X_2SRXOFFSET 0x45
+#define AD242X_I2SRXOFFSET_VAR(X) ((X) & 0x3f)
+
+#define AD242X_SYNCOFFSET 0x46
+
+#define AD242X_PDMCTL 0x47
+#define AD242X_PDMCTL_PDM0EN BIT(0)
+#define AD242X_PDMCTL_PDM0SLOTS BIT(1)
+#define AD242X_PDMCTL_PDM1EN BIT(2)
+#define AD242X_PDMCTL_PDM1SLOTS BIT(3)
+#define AD242X_PDMCTL_HPFEN BIT(4)
+#define AD242X_PDMCTL_PDMRATE(X) (((X) & 3) << 5)
+
+#define AD242X_ERRMGMT 0x48
+#define AD242X_ERRMGMT_ERRLSB BIT(0)
+#define AD242X_ERRMGMT_ERRSIG BIT(1)
+#define AD242X_ERRMGMT_ERRSLOT BIT(2)
+
+#define AD242X_GPIODAT 0x4a
+#define AD242X_GPIODAT_SET 0x4b
+#define AD242X_GPIODAT_CLR 0x4c
+#define AD242X_GPIOOEN 0x4d
+#define AD242X_GPIOIEN 0x4e
+#define AD242X_GPIODAT_IN 0x4f
+#define AD242X_PINTEN 0x50
+#define AD242X_PINTINV 0x51
+
+#define AD242X_PINCFG 0x52
+#define AD242X_PINCFG_DRVSTR BIT(0)
+#define AD242X_PINCFG_IRQINV BIT(4)
+#define AD242X_PINCFG_IRQTS BIT(5)
+
+#define AD242X_I2STEST 0x53
+#define AD242X_I2STEST_PATTRN2TX BIT(0)
+#define AD242X_I2STEST_LOOPBK2TX BIT(1)
+#define AD242X_I2STEST_RX2LOOPBK BIT(2)
+#define AD242X_I2STEST_SELRX1 BIT(3)
+#define AD242X_I2STEST_BUSLOOPBK BIT(4)
+
+#define AD242X_RAISE 0x54
+
+#define AD242X_GENERR 0x55
+#define AD242X_GENERR_GENHCERR BIT(0)
+#define AD242X_GENERR_GENDDERR BIT(1)
+#define AD242X_GENERR_GENCRCERR BIT(2)
+#define AD242X_GENERR_GENDPERR BIT(3)
+#define AD242X_GENERR_GENICRCERR BIT(4)
+
+#define AD242X_I2SRRATE 0x56
+#define AD242X_I2SRRATE_RRDIV(X) ((X) & 0x3f)
+#define AD242X_I2SRRATE_RBUS BIT(7)
+
+#define AD242X_I2SRRCTL 0x57
+#define AD242X_I2SRRCTL_ENVLSB BIT(0)
+#define AD242X_I2SRRCTL_ENXBIT BIT(1)
+#define AD242X_I2SRRCTL_ENSTRB BIT(4)
+#define AD242X_I2SRRCTL_STRBDIR BIT(5)
+
+#define AD242X_I2SRRSOFFS 0x58
+
+#define AD242X_CLK1CFG 0x59
+#define AD242X_CLK2CFG 0x5a
+#define AD242X_CLKCFG_DIV(X) ((X) & 0xf)
+#define AD242X_CLKCFG_DIVMSK 0xf
+#define AD242X_CLKCFG_PDIV32 BIT(5)
+#define AD242X_CLKCFG_INV BIT(6)
+#define AD242X_CLKCFG_EN BIT(7)
+
+#define AD242X_BMMCFG 0x5b
+#define AD242X_BMMCFG_BMMEN BIT(0)
+#define AD242X_BMMCFG_BMMRXEN BIT(1)
+#define AD242X_BMMCFG_BMMNDSC BIT(2)
+
+#define AD242X_PDMCTL2 0x5d
+#define AD242X_PDMCTL2_DEST_A2B 0
+#define AD242X_PDMCTL2_DEST_DTX 1
+#define AD242X_PDMCTL2_DEST_A2B_DTX 2
+
+#define AD242X_UPMASK(X) (0x60 + ((X) & 3))
+
+#define AD242X_UPOFFSET 0x64
+#define AD242X_UPOFFSET_VAL(X) ((X) & 0x1f)
+
+#define AD242X_DNMASK(X) (0x65 + ((X) % 3))
+
+#define AD242X_DNOFFSET 0x69
+#define AD242X_DNOFFSET_VAL(X) ((X) & 0x1f)
+
+#define AD242X_CHIPID(X) ((X) + 0x6a)
+
+#define AD242X_GPIODEN 0x80
+#define AD242X_GPIOD_MSK(X) ((X) + 0x81)
+
+#define AD242X_GPIODDAT 0x89
+#define AD242X_GPIODINV 0x8a
+
+#define AD242X_MAX_REG 0x9b
+
+static inline bool ad242x_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case AD242X_VENDOR:
+ case AD242X_PRODUCT:
+ case AD242X_VERSION:
+ case AD242X_CAPABILITY:
+ case AD242X_SWSTAT:
+ case AD242X_INTSTAT:
+ case AD242X_INTSRC:
+ case AD242X_INTTYPE:
+ case AD242X_INTPND0:
+ case AD242X_INTPND1:
+ case AD242X_INTPND2:
+ case AD242X_BECNT:
+ case AD242X_ERRCNT0:
+ case AD242X_ERRCNT1:
+ case AD242X_ERRCNT2:
+ case AD242X_ERRCNT3:
+ case AD242X_NODE:
+ case AD242X_DISCSTAT:
+ case AD242X_LINTTYPE:
+ case AD242X_GPIODAT:
+ case AD242X_GPIODAT_IN:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static inline bool ad242x_is_writeable_reg(struct device *dev, unsigned int reg)
+{
+ /* Write-to-clean registers */
+ switch (reg) {
+ case AD242X_INTPND0:
+ case AD242X_INTPND1:
+ case AD242X_INTPND2:
+ case AD242X_BECNT:
+ return true;
+ default:
+ return !ad242x_is_volatile_reg(dev, reg);
+ }
+}
+
+#define AD242X_MASTER_ID 0xff
+
+struct ad242x_master;
+
+struct ad242x_i2c_bus {
+ struct i2c_client *client;
+ struct mutex mutex;
+};
+
+struct ad242x_node {
+ struct device *dev;
+ struct regmap *regmap;
+ struct ad242x_master *master;
+ unsigned int tdm_mode;
+ unsigned int tdm_slot_size;
+ uint8_t id;
+ uint8_t caps;
+};
+
+struct ad242x_slot_config {
+ unsigned int dn_rx_slots;
+ unsigned int dn_n_tx_slots;
+ unsigned int dn_n_forward_slots;
+ unsigned int up_rx_slots;
+ unsigned int up_n_tx_slots;
+ unsigned int up_n_forward_slots;
+};
+
+int ad242x_read_slot_config(struct device *dev,
+ struct device_node *np,
+ struct ad242x_slot_config *config);
+
+static inline bool ad242x_node_is_master(struct ad242x_node *node)
+{
+ return node->id == AD242X_MASTER_ID;
+}
+
+int ad242x_node_probe(struct ad242x_node *node);
+int ad242x_node_add_mfd_cells(struct device *dev);
+
+struct ad242x_node *ad242x_master_get_node(struct ad242x_master *master);
+struct ad242x_i2c_bus *ad242x_master_get_bus(struct ad242x_master *master);
+const char *ad242x_master_get_clk_name(struct ad242x_master *master);
+unsigned int ad242x_master_get_clk_rate(struct ad242x_master *master);
+
+int ad242x_slave_read(struct ad242x_i2c_bus *bus,
+ struct regmap *master_regmap,
+ uint8_t node_id, uint8_t reg, unsigned int *val);
+int ad242x_slave_write(struct ad242x_i2c_bus *bus,
+ struct regmap *master_regmap,
+ uint8_t node_id, uint8_t reg, unsigned int val);
+
+#endif
--
2.23.0
Powered by blists - more mailing lists