[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <VE1PR04MB6687035009C691D31844C51D8F580@VE1PR04MB6687.eurprd04.prod.outlook.com>
Date: Mon, 9 Dec 2019 19:50:40 +0000
From: Leo Li <leoyang.li@....com>
To: Michael Walle <michael@...le.cc>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
CC: Shawn Guo <shawnguo@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
Subject: RE: [PATCH v2] arm64: dts: ls1028a: fix reboot node
> -----Original Message-----
> From: Michael Walle <michael@...le.cc>
> Sent: Monday, December 9, 2019 12:47 PM
> To: linux-arm-kernel@...ts.infradead.org; devicetree@...r.kernel.org; linux-
> kernel@...r.kernel.org
> Cc: Shawn Guo <shawnguo@...nel.org>; Leo Li <leoyang.li@....com>; Rob
> Herring <robh+dt@...nel.org>; Mark Rutland <mark.rutland@....com>;
> Michael Walle <michael@...le.cc>
> Subject: [PATCH v2] arm64: dts: ls1028a: fix reboot node
>
> The reboot register isn't located inside the DCFG controller, but in its own RST
> controller. Fix it.
>
> Fixes: 8897f3255c9c ("arm64: dts: Add support for NXP LS1028A SoC")
> Signed-off-by: Michael Walle <michael@...le.cc>
Acked-by: Li Yang <leoyang.li@....com>
> ---
>
> changes since v1:
> - add fixes tag
> - remove "ls1028a-rst" compatible string, because there is no actual
> driver for it. It just use the syscon driver.
>
> arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 8 +++++++-
> 1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index 8b28fda2ca20..7825550b7cef 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -88,7 +88,7 @@
>
> reboot {
> compatible ="syscon-reboot";
> - regmap = <&dcfg>;
> + regmap = <&rst>;
> offset = <0xb0>;
> mask = <0x02>;
> };
> @@ -178,6 +178,12 @@
> little-endian;
> };
>
> + rst: syscon@...0000 {
> + compatible = "syscon";
> + reg = <0x0 0x1e60000 0x0 0x10000>;
> + little-endian;
> + };
> +
> scfg: syscon@...0000 {
> compatible = "fsl,ls1028a-scfg", "syscon";
> reg = <0x0 0x1fc0000 0x0 0x10000>;
> --
> 2.20.1
Powered by blists - more mailing lists