lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAKwvOd=GYWaoxQg_xH-gOHfqKeTZ_qaw35ucjFxcjd69AK+pyw@mail.gmail.com>
Date:   Mon, 9 Dec 2019 13:18:29 -0800
From:   Nick Desaulniers <ndesaulniers@...gle.com>
To:     Nathan Chancellor <natechancellor@...il.com>
Cc:     Kyungmin Park <kyungmin.park@...sung.com>,
        Miquel Raynal <miquel.raynal@...tlin.com>,
        Vignesh Raghavendra <vigneshr@...com>,
        Richard Weinberger <richard@....at>,
        linux-mtd@...ts.infradead.org, LKML <linux-kernel@...r.kernel.org>,
        clang-built-linux <clang-built-linux@...glegroups.com>
Subject: Re: [PATCH v2] mtd: onenand_base: Adjust indentation in onenand_read_ops_nolock

On Mon, Dec 9, 2019 at 1:04 PM Nathan Chancellor
<natechancellor@...il.com> wrote:
>
> Clang warns:
>
> ../drivers/mtd/nand/onenand/onenand_base.c:1269:3: warning: misleading
> indentation; statement is not part of the previous 'if'
> [-Wmisleading-indentation]
>         while (!ret) {
>         ^
> ../drivers/mtd/nand/onenand/onenand_base.c:1266:2: note: previous
> statement is here
>         if (column + thislen > writesize)
>         ^
> 1 warning generated.
>
> This warning occurs because there is a space before the tab of the while
> loop. There are spaces at the beginning of a lot of the lines in this
> block, remove them so that the indentation is consistent with the Linux
> kernel coding style and clang no longer warns.
>
> Fixes: a8de85d55700 ("[MTD] OneNAND: Implement read-while-load")
> Link: https://github.com/ClangBuiltLinux/linux/issues/794
> Signed-off-by: Nathan Chancellor <natechancellor@...il.com>
> ---
>
> v1 -> v2:
>
> * Clean up the block before the one that warns, which was added as part
>   of the fixes commit (Nick).
>
>  drivers/mtd/nand/onenand/onenand_base.c | 80 ++++++++++++-------------
>  1 file changed, 40 insertions(+), 40 deletions(-)
>
> diff --git a/drivers/mtd/nand/onenand/onenand_base.c b/drivers/mtd/nand/onenand/onenand_base.c
> index 77bd32a683e1..13c69eb021a6 100644
> --- a/drivers/mtd/nand/onenand/onenand_base.c
> +++ b/drivers/mtd/nand/onenand/onenand_base.c
> @@ -1248,44 +1248,44 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
>
>         stats = mtd->ecc_stats;
>
> -       /* Read-while-load method */
> +       /* Read-while-load method */
>
> -       /* Do first load to bufferRAM */
> -       if (read < len) {
> -               if (!onenand_check_bufferram(mtd, from)) {
> +       /* Do first load to bufferRAM */
> +       if (read < len) {
> +               if (!onenand_check_bufferram(mtd, from)) {
>                         this->command(mtd, ONENAND_CMD_READ, from, writesize);
> -                       ret = this->wait(mtd, FL_READING);
> -                       onenand_update_bufferram(mtd, from, !ret);
> +                       ret = this->wait(mtd, FL_READING);
> +                       onenand_update_bufferram(mtd, from, !ret);
>                         if (mtd_is_eccerr(ret))
>                                 ret = 0;
> -               }
> -       }
> +               }
> +       }
>
>         thislen = min_t(int, writesize, len - read);
>         column = from & (writesize - 1);
>         if (column + thislen > writesize)
>                 thislen = writesize - column;
>
> -       while (!ret) {
> -               /* If there is more to load then start next load */
> -               from += thislen;
> -               if (read + thislen < len) {
> +       while (!ret) {
> +               /* If there is more to load then start next load */
> +               from += thislen;
> +               if (read + thislen < len) {
>                         this->command(mtd, ONENAND_CMD_READ, from, writesize);
> -                       /*
> -                        * Chip boundary handling in DDP
> -                        * Now we issued chip 1 read and pointed chip 1
> +                       /*
> +                        * Chip boundary handling in DDP
> +                        * Now we issued chip 1 read and pointed chip 1
>                          * bufferram so we have to point chip 0 bufferram.
> -                        */
> -                       if (ONENAND_IS_DDP(this) &&
> -                           unlikely(from == (this->chipsize >> 1))) {
> -                               this->write_word(ONENAND_DDP_CHIP0, this->base + ONENAND_REG_START_ADDRESS2);
> -                               boundary = 1;
> -                       } else
> -                               boundary = 0;
> -                       ONENAND_SET_PREV_BUFFERRAM(this);
> -               }
> -               /* While load is going, read from last bufferRAM */
> -               this->read_bufferram(mtd, ONENAND_DATARAM, buf, column, thislen);
> +                        */
> +                       if (ONENAND_IS_DDP(this) &&
> +                           unlikely(from == (this->chipsize >> 1))) {
> +                               this->write_word(ONENAND_DDP_CHIP0, this->base + ONENAND_REG_START_ADDRESS2);
> +                               boundary = 1;
> +                       } else
> +                               boundary = 0;
> +                       ONENAND_SET_PREV_BUFFERRAM(this);
> +               }
> +               /* While load is going, read from last bufferRAM */
> +               this->read_bufferram(mtd, ONENAND_DATARAM, buf, column, thislen);
>
>                 /* Read oob area if needed */
>                 if (oobbuf) {
> @@ -1302,23 +1302,23 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
>                 }
>
>                 /* See if we are done */

With this applied, I see a missed instance right here ^ (L1304).
In vim:


^ \t

In my .vimrc, I set:
https://github.com/nickdesaulniers/dotfiles/blob/37359525f5a403b4ed2d3f9d1bbbee2da8ec8115/.vimrc#L35-L41
to make tabs glaringly visible.

> -               read += thislen;
> -               if (read == len)
> -                       break;
> -               /* Set up for next read from bufferRAM */
> -               if (unlikely(boundary))
> -                       this->write_word(ONENAND_DDP_CHIP1, this->base + ONENAND_REG_START_ADDRESS2);
> -               ONENAND_SET_NEXT_BUFFERRAM(this);
> -               buf += thislen;
> +               read += thislen;
> +               if (read == len)
> +                       break;
> +               /* Set up for next read from bufferRAM */
> +               if (unlikely(boundary))
> +                       this->write_word(ONENAND_DDP_CHIP1, this->base + ONENAND_REG_START_ADDRESS2);
> +               ONENAND_SET_NEXT_BUFFERRAM(this);
> +               buf += thislen;
>                 thislen = min_t(int, writesize, len - read);
> -               column = 0;
> -               cond_resched();
> -               /* Now wait for load */
> -               ret = this->wait(mtd, FL_READING);
> -               onenand_update_bufferram(mtd, from, !ret);
> +               column = 0;
> +               cond_resched();
> +               /* Now wait for load */
> +               ret = this->wait(mtd, FL_READING);
> +               onenand_update_bufferram(mtd, from, !ret);
>                 if (mtd_is_eccerr(ret))
>                         ret = 0;
> -       }
> +       }
>
>         /*
>          * Return success, if no ECC failures, else -EBADMSG
> --
> 2.24.0
>
> --
> You received this message because you are subscribed to the Google Groups "Clang Built Linux" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to clang-built-linux+unsubscribe@...glegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/clang-built-linux/20191209210328.18866-1-natechancellor%40gmail.com.



-- 
Thanks,
~Nick Desaulniers

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ