[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20191210180643.GA10944@roeck-us.net>
Date: Tue, 10 Dec 2019 10:06:43 -0800
From: Guenter Roeck <linux@...ck-us.net>
To: Sudeep Holla <sudeep.holla@....com>
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Cristian Marussi <cristian.marussi@....com>,
Jean Delvare <jdelvare@...e.com>, linux-hwmon@...r.kernel.org
Subject: Re: [PATCH 14/15] hwmon: (scmi-hwmon) Match scmi device by both name
and protocol id
On Tue, Dec 10, 2019 at 02:53:44PM +0000, Sudeep Holla wrote:
> The scmi bus now has support to match the driver with devices not only
> based on their protocol id but also based on their device name if one is
> available. This was added to cater the need to support multiple devices
> and drivers for the same protocol.
>
> Let us add the name "hwmon" to scmi_device_id table in the driver so
> that in matches only with device with the same name and protocol id
> SCMI_PROTOCOL_SENSOR. This will help to add IIO support in parallel if
> needed.
If you are planning to re-implement the driver as iio driver, it would
make more sense to drop the hwmon driver entirely and use the iio->hwmon
bridge to access the sensors as hwmon devices if needed.
Guenter
>
> Cc: Jean Delvare <jdelvare@...e.com>
> Cc: Guenter Roeck <linux@...ck-us.net>
> Cc: linux-hwmon@...r.kernel.org
> Signed-off-by: Sudeep Holla <sudeep.holla@....com>
> ---
> drivers/hwmon/scmi-hwmon.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/hwmon/scmi-hwmon.c b/drivers/hwmon/scmi-hwmon.c
> index 8a7732c0bef3..286d3cfda7de 100644
> --- a/drivers/hwmon/scmi-hwmon.c
> +++ b/drivers/hwmon/scmi-hwmon.c
> @@ -259,7 +259,7 @@ static int scmi_hwmon_probe(struct scmi_device *sdev)
> }
>
> static const struct scmi_device_id scmi_id_table[] = {
> - { SCMI_PROTOCOL_SENSOR },
> + { SCMI_PROTOCOL_SENSOR, "hwmon" },
> { },
> };
> MODULE_DEVICE_TABLE(scmi, scmi_id_table);
> --
> 2.17.1
>
Powered by blists - more mailing lists