| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <00aa01d5af3c$632d0110$29870330$@emc.com.tw>
Date: Tue, 10 Dec 2019 17:29:57 +0800
From: "Johnny.Chuang" <johnny.chuang@....com.tw>
To: "'Dmitry Torokhov'" <dmitry.torokhov@...il.com>
Cc: <linux-kernel@...r.kernel.org>, <linux-input@...r.kernel.org>,
'STRD2-蔡惠嬋' <jennifer.tsai@....com.tw>,
<james.chen@....com.tw>,
'梁博翔' <paul.liang@....com.tw>,
"'jeff'" <jeff.chuang@....com.tw>
Subject: RE: [PATCH] Input: elants_i2c - Add Remark ID check flow in firmware update function
Hi Dmitry,
Please drop this patch.
I modified driver by your recommendation and commit a new patch.
Many thanks,
Johnny
-----Original Message-----
From: Johnny.Chuang [mailto:johnny.chuang@....com.tw]
Sent: Wednesday, December 04, 2019 3:10 PM
To: 'Dmitry Torokhov'
Cc: 'linux-kernel@...r.kernel.org'; 'linux-input@...r.kernel.org'; 'STRD2-蔡
惠嬋'; 'james.chen@....com.tw'; '梁博翔'; 'jeff'
Subject: RE: [PATCH] Input: elants_i2c - Add Remark ID check flow in
firmware update function
Hi Dmitry,
I had modified driver and responded you inline.
Many thanks,
Johnny
diff --git a/drivers/input/touchscreen/elants_i2c.c
b/drivers/input/touchscreen/elants_i2c.c
index 9a17af6..4911799 100644
--- a/drivers/input/touchscreen/elants_i2c.c
+++ b/drivers/input/touchscreen/elants_i2c.c
@@ -130,7 +130,6 @@ struct elants_data {
u8 bc_version;
u8 iap_version;
u16 hw_version;
- u16 remark_id;
unsigned int x_res; /* resolution in units/mm */
unsigned int y_res;
unsigned int x_max;
@@ -620,47 +619,33 @@ static int elants_i2c_fw_write_page(struct i2c_client
*client,
return error;
}
-static int elants_i2c_query_remark_id(struct elants_data *ts) -{
- struct i2c_client *client = ts->client;
- int error;
- const u8 cmd[] = { CMD_HEADER_ROM_READ, 0x80, 0x1F, 0x00, 0x00, 0x21
};
- u8 resp[6] = { 0 };
-
- error = elants_i2c_execute_command(client, cmd, sizeof(cmd),
- resp, sizeof(resp));
- if (error) {
- dev_err(&client->dev, "get Remark ID failed: %d.\n", error);
- return error;
- }
-
- ts->remark_id = get_unaligned_be16(&resp[3]);
- dev_info(&client->dev, "remark_id=0x%04x.\n", ts->remark_id);
-
- return 0;
-}
-
static int elants_i2c_validate_remark_id(struct elants_data *ts,
const struct firmware *fw) {
struct i2c_client *client = ts->client;
int error;
+ const u8 cmd[] = { CMD_HEADER_ROM_READ, 0x80, 0x1F, 0x00, 0x00, 0x21
};
+ u8 resp[6] = { 0 };
+ u16 ts_remark_id = 0;
u16 fw_remark_id = 0;
/* Compare TS Remark ID and FW Remark ID */
- error = elants_i2c_query_remark_id(ts);
+ error = elants_i2c_execute_command(client, cmd, sizeof(cmd),
+ resp, sizeof(resp));
if (error) {
dev_err(&client->dev, "failed to query Remark ID: %d\n",
error);
return error;
}
+ ts_remark_id = get_unaligned_be16(&resp[3]);
+
fw_remark_id = get_unaligned_le16(&fw->data[fw->size - 4]);
- dev_info(&client->dev, "fw_remark_id=0x%04x.\n", fw_remark_id);
- if (fw_remark_id != ts->remark_id) {
+
+ if (fw_remark_id != ts_remark_id) {
dev_err(&client->dev,
- "Remark ID Mismatched: ts_remark_id=0x%04x,
fw_remark_id=0x%x.\n",
- ts->remark_id, fw_remark_id);
- return -ENODATA;
+ "Remark ID Mismatched: ts_remark_id=0x%04x,
fw_remark_id=0x%04x.\n",
+ ts_remark_id, fw_remark_id);
+ return -EINVAL;
}
return 0;
@@ -671,7 +656,6 @@ static int elants_i2c_do_update_firmware(struct
i2c_client *client,
bool force) {
struct elants_data *ts = i2c_get_clientdata(client);
- static const u8 w_flashkey[] = { 0x54, 0xC0, 0xE1, 0x5A };
const u8 enter_iap[] = { 0x45, 0x49, 0x41, 0x50 };
const u8 enter_iap2[] = { 0x54, 0x00, 0x12, 0x34 };
const u8 iap_ack[] = { 0x55, 0xaa, 0x33, 0xcc }; @@ -686,29 +670,18
@@ static int elants_i2c_do_update_firmware(struct i2c_client *client,
if (force) {
dev_dbg(&client->dev, "Recovery mode procedure\n");
- if (check_remark_id == true) {
- /* Validate Remark ID */
+ if (check_remark_id) {
error = elants_i2c_validate_remark_id(ts, fw);
- if (error) {
- dev_err(&client->dev,
- "failed to validate Remark ID:
%d\n",
- error);
+ if (error)
return error;
- }
}
- error = elants_i2c_send(client, w_flashkey,
sizeof(w_flashkey));
- if (error)
- dev_err(&client->dev, "failed to write flash key:
%d\n",
- error);
-
error = elants_i2c_send(client, enter_iap2,
sizeof(enter_iap2));
if (error) {
dev_err(&client->dev, "failed to enter IAP mode:
%d\n",
error);
return error;
}
- msleep(20);
} else {
/* Start IAP Procedure */
dev_dbg(&client->dev, "Normal IAP procedure\n"); @@ -722,14
+695,10 @@ static int elants_i2c_do_update_firmware(struct i2c_client
*client,
elants_i2c_sw_reset(client);
msleep(20);
- if (check_remark_id == true) {
- /* Validate Remark ID */
+ if (check_remark_id) {
error = elants_i2c_validate_remark_id(ts, fw);
- if (error) {
- dev_err(&client->dev, "failed to validate
Remark ID: %d\n",
- error);
+ if (error)
return error;
- }
}
error = elants_i2c_send(client, enter_iap,
sizeof(enter_iap));
-----Original Message-----
From: 'Dmitry Torokhov' [mailto:dmitry.torokhov@...il.com]
Sent: Wednesday, December 04, 2019 3:48 AM
To: Johnny.Chuang
Cc: linux-kernel@...r.kernel.org; linux-input@...r.kernel.org; STRD2-蔡惠嬋;
james.chen@....com.tw; '梁博翔'; 'jeff'
Subject: Re: [PATCH] Input: elants_i2c - Add Remark ID check flow in
firmware update function
Hi Johnny,
On Tue, Nov 19, 2019 at 01:59:45PM +0800, Johnny.Chuang wrote:
> This patch add Remark ID check flow to firmware update function of
> elan touchscreen driver.
>
> It avoids firmware update with mismatched Remark ID.
>
> This function is supported by our latest version of boot code, but it
> cooperates well with earlier versions.
>
> Our driver will decide if enable Remark ID check with boot code version.
>
> Signed-off-by: Johnny Chuang <johnny.chuang@....com.tw>
> ---
> drivers/input/touchscreen/elants_i2c.c | 108
> ++++++++++++++++++++++++++++++---
> 1 file changed, 100 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/input/touchscreen/elants_i2c.c
> b/drivers/input/touchscreen/elants_i2c.c
> index d4ad24e..9a17af6 100644
> --- a/drivers/input/touchscreen/elants_i2c.c
> +++ b/drivers/input/touchscreen/elants_i2c.c
> @@ -59,8 +59,10 @@
> #define CMD_HEADER_WRITE 0x54
> #define CMD_HEADER_READ 0x53
> #define CMD_HEADER_6B_READ 0x5B
> +#define CMD_HEADER_ROM_READ 0x96
> #define CMD_HEADER_RESP 0x52
> #define CMD_HEADER_6B_RESP 0x9B
> +#define CMD_HEADER_ROM_RESP 0x95
> #define CMD_HEADER_HELLO 0x55
> #define CMD_HEADER_REK 0x66
>
> @@ -128,6 +130,7 @@ struct elants_data {
> u8 bc_version;
> u8 iap_version;
> u16 hw_version;
> + u16 remark_id;
We only use this during firmware version check phase, no need to store it in
the device data structure.
[J]: I remove remark_id and move work of elants_i2c_query_remark_id() into
elants_i2c_validate_remark_id().
> unsigned int x_res; /* resolution in units/mm */
> unsigned int y_res;
> unsigned int x_max;
> @@ -200,6 +203,10 @@ static int elants_i2c_execute_command(struct
> i2c_client *client,
> expected_response = CMD_HEADER_6B_RESP;
> break;
>
> + case CMD_HEADER_ROM_READ:
> + expected_response = CMD_HEADER_ROM_RESP;
> + break;
> +
> default:
> dev_err(&client->dev, "%s: invalid command %*ph\n",
> __func__, (int)cmd_size, cmd);
> @@ -556,6 +563,8 @@ static int elants_i2c_initialize(struct
> elants_data *ts)
>
> /* hw version is available even if device in recovery state */
> error2 = elants_i2c_query_hw_version(ts);
> + if (!error2)
> + error2 = elants_i2c_query_bc_version(ts);
Can you please explain why this change is done? This does not seem to relate
to the "remark id" functionality. Should it be a separate change?
[J]: We use ts->iap_version as check_remark_id to run validate remark id
flow or not. Hence we need to get iap_version by elants_i2c_query_bc_version
not only on normal mode but also on recovery mode.
> if (!error)
> error = error2;
>
> @@ -564,8 +573,6 @@ static int elants_i2c_initialize(struct elants_data
*ts)
> if (!error)
> error = elants_i2c_query_test_version(ts);
> if (!error)
> - error = elants_i2c_query_bc_version(ts);
> - if (!error)
> error = elants_i2c_query_ts_info(ts);
>
> if (error)
> @@ -613,39 +620,124 @@ static int elants_i2c_fw_write_page(struct
> i2c_client *client,
> return error;
> }
>
> +static int elants_i2c_query_remark_id(struct elants_data *ts) {
> + struct i2c_client *client = ts->client;
> + int error;
> + const u8 cmd[] = { CMD_HEADER_ROM_READ, 0x80, 0x1F, 0x00, 0x00, 0x21
> };
> + u8 resp[6] = { 0 };
> +
> + error = elants_i2c_execute_command(client, cmd, sizeof(cmd),
> + resp, sizeof(resp));
> + if (error) {
> + dev_err(&client->dev, "get Remark ID failed: %d.\n", error);
> + return error;
> + }
> +
> + ts->remark_id = get_unaligned_be16(&resp[3]);
> + dev_info(&client->dev, "remark_id=0x%04x.\n", ts->remark_id);
I do not think we need be this noisy. Either dev_dbg, or drop it completely.
[J]: drop done.
> +
> + return 0;
> +}
> +
> +static int elants_i2c_validate_remark_id(struct elants_data *ts,
> + const struct firmware *fw)
> +{
> + struct i2c_client *client = ts->client;
> + int error;
> + u16 fw_remark_id = 0;
> +
> + /* Compare TS Remark ID and FW Remark ID */
> + error = elants_i2c_query_remark_id(ts);
> + if (error) {
> + dev_err(&client->dev, "failed to query Remark ID: %d\n",
> error);
> + return error;
> + }
> +
> + fw_remark_id = get_unaligned_le16(&fw->data[fw->size - 4]);
> + dev_info(&client->dev, "fw_remark_id=0x%04x.\n", fw_remark_id);
Please drop this dev_info().
[J]: drop done.
> + if (fw_remark_id != ts->remark_id) {
> + dev_err(&client->dev,
> + "Remark ID Mismatched: ts_remark_id=0x%04x,
> fw_remark_id=0x%x.\n",
You can use "%#04x" to format with prefix.
[J]: Thanks for your recommendation. I still keep 0x%04x as other in this
driver. I will submit another patch for all prefix change later.
> + ts->remark_id, fw_remark_id);
> + return -ENODATA;
I'd say -EINVAL here.
[J]: change done.
> + }
> +
> + return 0;
> +}
> +
> static int elants_i2c_do_update_firmware(struct i2c_client *client,
> const struct firmware *fw,
> bool force)
> {
> + struct elants_data *ts = i2c_get_clientdata(client);
> + static const u8 w_flashkey[] = { 0x54, 0xC0, 0xE1, 0x5A };
> const u8 enter_iap[] = { 0x45, 0x49, 0x41, 0x50 };
> const u8 enter_iap2[] = { 0x54, 0x00, 0x12, 0x34 };
> const u8 iap_ack[] = { 0x55, 0xaa, 0x33, 0xcc };
> - const u8 close_idle[] = {0x54, 0x2c, 0x01, 0x01};
> + const u8 close_idle[] = { 0x54, 0x2c, 0x01, 0x01 };
> u8 buf[HEADER_SIZE];
> u16 send_id;
> int page, n_fw_pages;
> int error;
> + bool check_remark_id = ts->iap_version >= 0x60;
>
> /* Recovery mode detection! */
> if (force) {
> dev_dbg(&client->dev, "Recovery mode procedure\n");
> +
> + if (check_remark_id == true) {
Simply
if (check_remark_id) {
[J]: change done.
> + /* Validate Remark ID */
This comment is not needed, you named the function that you are calling
below well and its name describes what we are trying to do perfectly.
[J]: drop done.
> + error = elants_i2c_validate_remark_id(ts, fw);
> + if (error) {
> + dev_err(&client->dev,
> + "failed to validate Remark ID:
> %d\n",
> + error);
elants_i2c_validate_remark_id() already gives necessary diagnostic, this
message is not needed.
[J]: drop done.
> + return error;
> + }
> + }
> +
> + error = elants_i2c_send(client, w_flashkey,
> sizeof(w_flashkey));
> + if (error)
> + dev_err(&client->dev, "failed to write flash key:
> %d\n",
> + error);
Sending flashkey in this chunk seems to be another change not directly
related to the remark id. Why do we need this? Should it be split out?
[J]: drop done. It's for another change.
> +
> error = elants_i2c_send(client, enter_iap2,
sizeof(enter_iap2));
> + if (error) {
> + dev_err(&client->dev, "failed to enter IAP mode:
> %d\n",
> + error);
> + return error;
> + }
> + msleep(20);
We already have msleep(20) in the common path below, do we really need 2nd
one here?
[J]: drop done. It's typo.
> } else {
> /* Start IAP Procedure */
> dev_dbg(&client->dev, "Normal IAP procedure\n");
> +
> /* Close idle mode */
> error = elants_i2c_send(client, close_idle,
sizeof(close_idle));
> if (error)
> dev_err(&client->dev, "Failed close idle: %d\n",
error);
> msleep(60);
> +
> elants_i2c_sw_reset(client);
> msleep(20);
> - error = elants_i2c_send(client, enter_iap,
> sizeof(enter_iap));
> - }
>
> - if (error) {
> - dev_err(&client->dev, "failed to enter IAP mode: %d\n",
> error);
> - return error;
> + if (check_remark_id == true) {
if (check_remark_id) {
> + /* Validate Remark ID */
Drop comment.
[J]: drop done.
> + error = elants_i2c_validate_remark_id(ts, fw);
> + if (error) {
> + dev_err(&client->dev, "failed to validate
> Remark ID: %d\n",
> + error);
Drop message.
[J]: drop done.
> + return error;
> + }
> + }
> +
> + error = elants_i2c_send(client, enter_iap,
> sizeof(enter_iap));
> + if (error) {
> + dev_err(&client->dev, "failed to enter IAP mode:
> %d\n",
> + error);
> + return error;
> + }
> }
>
> msleep(20);
> --
> 2.7.4
>
Thanks.
--
Dmitry
Powered by blists - more mailing lists