[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20191210095151.15441-5-faiz_abbas@ti.com>
Date: Tue, 10 Dec 2019 15:21:48 +0530
From: Faiz Abbas <faiz_abbas@...com>
To: <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-mmc@...r.kernel.org>
CC: <kishon@...com>, <adrian.hunter@...el.com>, <mark.rutland@....com>,
<robh+dt@...nel.org>, <ulf.hansson@...aro.org>,
<zhang.chunyan@...aro.org>, <tony@...mide.com>
Subject: [PATCH v3 4/7] mmc: sdhci: Add quirk for disabling DTO during erase command
Some controllers might prematurely issue a data timeout during an erase
command. Add a quirk to disable the interrupt when an erase command is
issued.
Signed-off-by: Faiz Abbas <faiz_abbas@...com>
---
drivers/mmc/host/sdhci.c | 5 +++++
drivers/mmc/host/sdhci.h | 2 ++
2 files changed, 7 insertions(+)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 6f3d4991bee1..b8934c50b9c4 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1532,6 +1532,11 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
/* Initially, a command has no error */
cmd->error = 0;
+ if (cmd->opcode == MMC_ERASE &&
+ (host->quirks2 & SDHCI_QUIRK2_DISABLE_DTO_FOR_ERASE)) {
+ sdhci_set_data_timeout_irq(host, false);
+ }
+
if ((host->quirks2 & SDHCI_QUIRK2_STOP_WITH_TC) &&
cmd->opcode == MMC_STOP_TRANSMISSION)
cmd->flags |= MMC_RSP_BUSY;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index b28706a1bc6f..beda9afba3a6 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -482,6 +482,8 @@ struct sdhci_host {
* block count.
*/
#define SDHCI_QUIRK2_USE_32BIT_BLK_CNT (1<<18)
+/* Controller needs to disable DTO for erase command */
+#define SDHCI_QUIRK2_DISABLE_DTO_FOR_ERASE (1<<19)
int irq; /* Device IRQ */
void __iomem *ioaddr; /* Mapped address */
--
2.19.2
Powered by blists - more mailing lists