linux-kernel - Re: [PATCH 8/8] arm64: dts: rockchip: RockPro64: enable wifi module at sdio0

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <3170826.NpdqLUR24W@diego>
Date:   Tue, 10 Dec 2019 11:13:39 +0100
From:   Heiko Stübner <heiko@...ech.de>
To:     Soeren Moch <smoch@....de>
Cc:     Kalle Valo <kvalo@...eaurora.org>, linux-wireless@...r.kernel.org,
        brcm80211-dev-list.pdl@...adcom.com,
        brcm80211-dev-list@...ress.com, netdev@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 8/8] arm64: dts: rockchip: RockPro64: enable wifi module at sdio0

Am Dienstag, 10. Dezember 2019, 11:08:18 CET schrieb Soeren Moch:
> Hi Heiko,
> 
> On 10.12.19 02:18, Heiko Stübner wrote:
> > Hi Soeren,
> >
> > Am Dienstag, 10. Dezember 2019, 00:29:21 CET schrieb Soeren Moch:
> >> On 10.12.19 00:08, Heiko Stübner wrote:
> >>> Am Montag, 9. Dezember 2019, 23:38:22 CET schrieb Soeren Moch:
> >>>> RockPro64 supports an Ampak AP6359SA based wifi/bt combo module.
> >>>> The BCM4359/9 wifi controller in this module is connected to sdio0,
> >>>> enable this interface.
> >>>>
> >>>> Signed-off-by: Soeren Moch <smoch@....de>
> >>>> ---
> >>>> Not sure where to place exactly the sdio0 node in the dts because
> >>>> existing sd nodes are not sorted alphabetically.
> >>>>
> >>>> This last patch in this brcmfmac patch series probably should be picked
> >>>> up by Heiko independently of the rest of this series. It was sent together
> >>>> to show how this brcmfmac extension for 4359-sdio support with RSDB is
> >>>> used and tested.
> >>> node placement looks good so I can apply it, just a general questions
> >>> I only got patch 8/8 are patches 1-7 relevant for this one and what are they?
> >> Patches 1-7 are the patches to support the BCM4359 chipset with SDIO
> >> interface in the linux brcmfmac net-wireless driver, see [1].
> >>
> >> So this patch series has 2 parts:
> >> patches 1-7: add support for the wifi chipset in the wireless driver,
> >> this has to go through net-wireless
> >> patch 8: enable the wifi module with this chipset on RockPro64, this patch
> > Thanks for the clarification :-) .
> >
> > As patch 8 "only" does the core sdio node, it doesn't really depend on the
> > earlier ones and you can submit any uart-hooks for bluetooth once the
> > other patches land I guess.
> The uart part for bluetooth already is in: uart0.
> However, I haven't tested if it really works.

In the new world there is now also a way to actually hook the bt-uart to
the wifi driver without userspace intervention, and you might want to hook
up the interrupt as well for sdio? For example look at the rock960:

sdio-interrupt: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi#n510
uart-magic: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi#n557


Heiko

> >> If this was confusing, what would be the ideal way to post such series?
> > I think every maintainer has some slightly different perspective on this,
> > but personally I like getting the whole series to follow the discussion but
> > also to just see when the driver-side changes get merged, as the dts-parts
> > need to wait for that in a lot of cases.
> OK, thanks.
> I will add you for the whole series when sending a v2.
> 
> Soeren
> >
> > Heiko
> >
> >
> >> [1] https://patchwork.kernel.org/project/linux-wireless/list/?series=213951
> >>> Thanks
> >>> Heiko
> >>>
> >>>
> >>>> Cc: Heiko Stuebner <heiko@...ech.de>
> >>>> Cc: Kalle Valo <kvalo@...eaurora.org>
> >>>> Cc: linux-wireless@...r.kernel.org
> >>>> Cc: brcm80211-dev-list.pdl@...adcom.com
> >>>> Cc: brcm80211-dev-list@...ress.com
> >>>> Cc: netdev@...r.kernel.org
> >>>> Cc: linux-arm-kernel@...ts.infradead.org
> >>>> Cc: linux-rockchip@...ts.infradead.org
> >>>> Cc: linux-kernel@...r.kernel.org
> >>>> ---
> >>>>  .../boot/dts/rockchip/rk3399-rockpro64.dts    | 21 ++++++++++++-------
> >>>>  1 file changed, 14 insertions(+), 7 deletions(-)
> >>>>
> >>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
> >>>> index 7f4b2eba31d4..9fa92790d6e0 100644
> >>>> --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
> >>>> +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
> >>>> @@ -71,13 +71,6 @@
> >>>>  		clock-names = "ext_clock";
> >>>>  		pinctrl-names = "default";
> >>>>  		pinctrl-0 = <&wifi_enable_h>;
> >>>> -
> >>>> -		/*
> >>>> -		 * On the module itself this is one of these (depending
> >>>> -		 * on the actual card populated):
> >>>> -		 * - SDIO_RESET_L_WL_REG_ON
> >>>> -		 * - PDN (power down when low)
> >>>> -		 */
> >>>>  		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
> >>>>  	};
> >>>>
> >>>> @@ -650,6 +643,20 @@
> >>>>  	status = "okay";
> >>>>  };
> >>>>
> >>>> +&sdio0 {
> >>>> +	bus-width = <4>;
> >>>> +	cap-sd-highspeed;
> >>>> +	cap-sdio-irq;
> >>>> +	disable-wp;
> >>>> +	keep-power-in-suspend;
> >>>> +	mmc-pwrseq = <&sdio_pwrseq>;
> >>>> +	non-removable;
> >>>> +	pinctrl-names = "default";
> >>>> +	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
> >>>> +	sd-uhs-sdr104;
> >>>> +	status = "okay";
> >>>> +};
> >>>> +
> >>>>  &sdmmc {
> >>>>  	bus-width = <4>;
> >>>>  	cap-sd-highspeed;
> >>>> --
> >>>> 2.17.1
> >>>>
> >>>
> >>>
> >>
> >
> >
> >
> 
>