linux-kernel - Re: [PATCH] arm64: dts: meson-a1: add I2C nodes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1j8snkh4cz.fsf@starbuckisacylon.baylibre.com>
Date:   Tue, 10 Dec 2019 11:17:16 +0100
From:   Jerome Brunet <jbrunet@...libre.com>
To:     Jian Hu <jian.hu@...ogic.com>,
        Neil Armstrong <narmstrong@...libre.com>
Cc:     Kevin Hilman <khilman@...libre.com>,
        "Rob Herring" <robh@...nel.org>,
        Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
        Michael Turquette <mturquette@...libre.com>,
        Wolfram Sang <wsa@...-dreams.de>,
        Mark Rutland <mark.rutland@....com>,
        Jianxin Pan <jianxin.pan@...ogic.com>,
        linux-amlogic@...ts.infradead.org, linux-i2c@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org
Subject: Re: [PATCH] arm64: dts: meson-a1: add I2C nodes


On Mon 02 Dec 2019 at 12:12, Jian Hu <jian.hu@...ogic.com> wrote:

> There are four I2C controllers in A1 series,
> Share the same comptible with AXG.The I2C nodes
> depend on pinmux and clock controller.
>
> Signed-off-by: Jian Hu <jian.hu@...ogic.com>
> ---
>  arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 149 ++++++++++++++++++++++
>  1 file changed, 149 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
> index eab2ecd36aa8..d0a73d953f5e 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
> @@ -16,6 +16,13 @@
>  	#address-cells = <2>;
>  	#size-cells = <2>;
>  
> +	aliases {
> +		i2c0 = &i2c0;
> +		i2c1 = &i2c1;
> +		i2c2 = &i2c2;
> +		i2c3 = &i2c3;
> +	};
> +

I wonder if assigning i2c bus alias in the SoC dtsi is such a good idea.

Such aliases are usually assigned as needed by each board design:
meson-a1-ad401.dts in your case.