linux-kernel - [PATCH v2 1/4] gpio: add gpiod_toggle_active

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <7ce0338e01ad17fa5a227176813941b41a7c35c1.1576031637.git.mirq-linux@rere.qmqm.pl>
Date:   Wed, 11 Dec 2019 03:40:55 +0100
From:   Michał Mirosław <mirq-linux@...e.qmqm.pl>
To:     linux-mmc@...r.kernel.org
Cc:     Ulf Hansson <ulf.hansson@...aro.org>,
        Linus Walleij <linus.walleij@...aro.org>,
        Bartosz Golaszewski <bgolaszewski@...libre.com>,
        linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org,
        Adrian Hunter <adrian.hunter@...el.com>
Subject: [PATCH v2 1/4] gpio: add gpiod_toggle_active_low()

Add possibility to toggle active-low flag of a gpio descriptor. This is
useful for compatibility code, where defaults are inverted vs DT gpio
flags or the active-low flag is taken from elsewhere.

Acked-by: Linus Walleij <linus.walleij@...aro.org>
Signed-off-by: Michał Mirosław <mirq-linux@...e.qmqm.pl>
---
 drivers/gpio/gpiolib.c        | 11 +++++++++++
 include/linux/gpio/consumer.h |  7 +++++++
 2 files changed, 18 insertions(+)

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 9913886ede90..6130691e2047 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -3363,6 +3363,17 @@ int gpiod_is_active_low(const struct gpio_desc *desc)
 }
 EXPORT_SYMBOL_GPL(gpiod_is_active_low);
 
+/**
+ * gpiod_toggle_active_low - toggle whether a GPIO is active-low or not
+ * @desc: the gpio descriptor to change
+ */
+void gpiod_toggle_active_low(struct gpio_desc *desc)
+{
+	VALIDATE_DESC_VOID(desc);
+	change_bit(FLAG_ACTIVE_LOW, &desc->flags);
+}
+EXPORT_SYMBOL_GPL(gpiod_toggle_active_low);
+
 /* I/O calls are only valid after configuration completed; the relevant
  * "is this a valid GPIO" error checks should already have been done.
  *
diff --git a/include/linux/gpio/consumer.h b/include/linux/gpio/consumer.h
index 5215fdba6b9a..bf2d017dd7b7 100644
--- a/include/linux/gpio/consumer.h
+++ b/include/linux/gpio/consumer.h
@@ -158,6 +158,7 @@ int gpiod_set_raw_array_value_cansleep(unsigned int array_size,
 
 int gpiod_set_debounce(struct gpio_desc *desc, unsigned debounce);
 int gpiod_set_transitory(struct gpio_desc *desc, bool transitory);
+void gpiod_toggle_active_low(struct gpio_desc *desc);
 
 int gpiod_is_active_low(const struct gpio_desc *desc);
 int gpiod_cansleep(const struct gpio_desc *desc);
@@ -483,6 +484,12 @@ static inline int gpiod_set_transitory(struct gpio_desc *desc, bool transitory)
 	return -ENOSYS;
 }
 
+static inline void gpiod_toggle_active_low(struct gpio_desc *desc)
+{
+	/* GPIO can never have been requested */
+	WARN_ON(desc);
+}
+
 static inline int gpiod_is_active_low(const struct gpio_desc *desc)
 {
 	/* GPIO can never have been requested */
-- 
2.20.1