| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20191211032802.83309-1-jian.hu@amlogic.com>
Date: Wed, 11 Dec 2019 11:28:02 +0800
From: Jian Hu <jian.hu@...ogic.com>
To: Jerome Brunet <jbrunet@...libre.com>,
Neil Armstrong <narmstrong@...libre.com>
CC: Jian Hu <jian.hu@...ogic.com>, Kevin Hilman <khilman@...libre.com>,
Rob Herring <robh@...nel.org>,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
Michael Turquette <mturquette@...libre.com>,
Wolfram Sang <wsa@...-dreams.de>,
Mark Rutland <mark.rutland@....com>,
Jianxin Pan <jianxin.pan@...ogic.com>,
<linux-amlogic@...ts.infradead.org>, <linux-i2c@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>
Subject: [PATCH v2] arm64: dts: meson-a1: add I2C nodes
There are four I2C controllers in A1 series,
Share the same comptible with AXG. Compared to AXG,
Drive strength feature is newly added in A1.
This patch depends on A1 clock driver.
Signed-off-by: Jian Hu <jian.hu@...ogic.com>
---
This patch depends on A1 clock patchset at[0]
Changes since v1 at [1]:
-change reg length to 0x20
-assign i2c bus alias in dts file
-add new feature note compared to AXG in changelog
[0] https://lkml.kernel.org/r/20191206074052.15557-1-jian.hu@amlogic.com
[1] https://lkml.kernel.org/r/20191202111253.94872-1-jian.hu@amlogic.com
---
---
.../arm64/boot/dts/amlogic/meson-a1-ad401.dts | 4 +
arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 142 ++++++++++++++++++
2 files changed, 146 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts b/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts
index 69c25c68c358..2d0457976233 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts
@@ -13,6 +13,10 @@
aliases {
serial0 = &uart_AO_B;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
};
chosen {
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index eab2ecd36aa8..66d5206a57de 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -117,6 +117,46 @@
};
};
+ i2c0: i2c@...0 {
+ compatible = "amlogic,meson-axg-i2c";
+ reg = <0x0 0x1400 0x0 0x20>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc_periphs CLKID_I2C_M_A>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@...0 {
+ compatible = "amlogic,meson-axg-i2c";
+ reg = <0x0 0x5c00 0x0 0x20>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc_periphs CLKID_I2C_M_B>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@...0 {
+ compatible = "amlogic,meson-axg-i2c";
+ reg = <0x0 0x6800 0x0 0x20>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc_periphs CLKID_I2C_M_C>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@...0 {
+ compatible = "amlogic,meson-axg-i2c";
+ reg = <0x0 0x6c00 0x0 0x20>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc_periphs CLKID_I2C_M_D>;
+ status = "disabled";
+ };
+
uart_AO: serial@...0 {
compatible = "amlogic,meson-gx-uart",
"amlogic,meson-ao-uart";
@@ -171,3 +211,105 @@
#clock-cells = <0>;
};
};
+
+&periphs_pinctrl {
+ i2c0_f11_pins:i2c0-f11 {
+ mux {
+ groups = "i2c0_sck_f11",
+ "i2c0_sda_f12";
+ function = "i2c0";
+ bias-pull-up;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c0_f9_pins:i2c0-f9 {
+ mux {
+ groups = "i2c0_sck_f9",
+ "i2c0_sda_f10";
+ function = "i2c0";
+ bias-pull-up;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c1_x_pins:i2c1-x {
+ mux {
+ groups = "i2c1_sck_x",
+ "i2c1_sda_x";
+ function = "i2c1";
+ bias-pull-up;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c1_a_pins:i2c1-a {
+ mux {
+ groups = "i2c1_sck_a",
+ "i2c1_sda_a";
+ function = "i2c1";
+ bias-pull-up;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c2_x0_pins:i2c2-x0 {
+ mux {
+ groups = "i2c2_sck_x0",
+ "i2c2_sda_x1";
+ function = "i2c2";
+ bias-pull-up;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c2_x15_pins:i2c2-x15 {
+ mux {
+ groups = "i2c2_sck_x15",
+ "i2c2_sda_x16";
+ function = "i2c2";
+ bias-pull-up;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c2_a4_pins:i2c2-a4 {
+ mux {
+ groups = "i2c2_sck_a4",
+ "i2c2_sda_a5";
+ function = "i2c2";
+ bias-pull-up;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c2_a8_pins:i2c2-a8 {
+ mux {
+ groups = "i2c2_sck_a8",
+ "i2c2_sda_a9";
+ function = "i2c2";
+ bias-pull-up;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c3_x_pins:i2c3-x {
+ mux {
+ groups = "i2c3_sck_x",
+ "i2c3_sda_x";
+ function = "i2c3";
+ bias-pull-up;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c3_f_pins:i2c3-f {
+ mux {
+ groups = "i2c3_sck_f",
+ "i2c3_sda_f";
+ function = "i2c3";
+ bias-pull-up;
+ drive-strength-microamp = <3000>;
+ };
+ };
+};
--
2.24.0
Powered by blists - more mailing lists