linux-kernel - Re: [PATCH net-next 5/6] arm64: dts: mt7622: add mt7531 dsa to mt7622-rfb1 board

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1576088846.23763.80.camel@mtksdccf07>
Date:   Thu, 12 Dec 2019 02:27:26 +0800
From:   Landen Chao <landen.chao@...iatek.com>
To:     Andrew Lunn <andrew@...n.ch>
CC:     "f.fainelli@...il.com" <f.fainelli@...il.com>,
        "vivien.didelot@...oirfairelinux.com" 
        <vivien.didelot@...oirfairelinux.com>,
        "matthias.bgg@...il.com" <matthias.bgg@...il.com>,
        "robh+dt@...nel.org" <robh+dt@...nel.org>,
        "mark.rutland@....com" <mark.rutland@....com>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "linux-mediatek@...ts.infradead.org" 
        <linux-mediatek@...ts.infradead.org>,
        "davem@...emloft.net" <davem@...emloft.net>,
        Sean Wang <Sean.Wang@...iatek.com>,
        "opensource@...rst.com" <opensource@...rst.com>,
        "frank-w@...lic-files.de" <frank-w@...lic-files.de>
Subject: Re: [PATCH net-next 5/6] arm64: dts: mt7622: add mt7531 dsa to
 mt7622-rfb1 board

On Wed, 2019-12-11 at 00:51 +0800, Andrew Lunn wrote:
> > +				port@6 {
> > +					reg = <6>;
> > +					label = "cpu";
> > +					ethernet = <&gmac0>;
> > +					phy-mode = "2500base-x";
> > +
> > +					fixed-link {
> > +						speed = <2500>;
> > +						full-duplex;
> > +						pause;
> > +					};
> 
> This fixed-link should not be needed. The DSA driver is supposed to
> configure the CPU port to its fastest speed by default. 2500 is
> the fastest speed a 2500Base-X link can do...
I'll add the cpu port logic to use the fastest speed by default.
It also needs to modify the mt753x_phylink_mac_config() logic.

Landen
> 
>     Andrew