lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <a171b388-7f92-17cd-8b9a-dcb1c846b6f7@amlogic.com>
Date:   Wed, 11 Dec 2019 21:16:13 +0800
From:   Jian Hu <jian.hu@...ogic.com>
To:     Jerome Brunet <jbrunet@...libre.com>,
        Neil Armstrong <narmstrong@...libre.com>
CC:     Kevin Hilman <khilman@...libre.com>, Rob Herring <robh@...nel.org>,
        Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
        Michael Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...nel.org>,
        Qiufang Dai <qiufang.dai@...ogic.com>,
        Jianxin Pan <jianxin.pan@...ogic.com>,
        Victor Wan <victor.wan@...ogic.com>,
        Chandle Zou <chandle.zou@...ogic.com>,
        <linux-clk@...r.kernel.org>, <linux-amlogic@...ts.infradead.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>
Subject: Re: [PATCH] arm64: dts: meson: add A1 periphs and PLL clock nodes



On 2019/12/11 17:43, Jerome Brunet wrote:
> 
> On Wed 11 Dec 2019 at 08:08, Jian Hu <jian.hu@...ogic.com> wrote:
> 
>> Add A1 periphs and PLL clock controller nodes, Some clocks
>> in periphs controller are the parents of PLL clocks, Meanwhile
>> some clocks in PLL controller are those of periphs clocks.
>> They rely on each other.
> 
>> Compared with the previous series,
>> the register region is only for the clock. So syscon is not
>> used in A1.
> 
> Again, while this is valuable information for the maintainer to keep up,
> it is not something that should appear in the commit description.
> 
> The evolution of your commit should be described after the '---'
> 
OK, I will put the compared message after the '---'
> Also, this obviously depends on another series. It should be mentioned
> accordingly
OK, I will add the dependent clock patchset.
> 
>>
>> Signed-off-by: Jian Hu <jian.hu@...ogic.com>
>> ---
>>   arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 26 +++++++++++++++++++++++
>>   1 file changed, 26 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
>> index 7210ad049d1d..de43a010fa6e 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
>> @@ -5,6 +5,8 @@
>>   
>>   #include <dt-bindings/interrupt-controller/irq.h>
>>   #include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/clock/a1-pll-clkc.h>
>> +#include <dt-bindings/clock/a1-clkc.h>
> 
> When possible, please order the includes alpha-numerically
> 
OK, I will reorder it.
>>   
>>   / {
>>   	compatible = "amlogic,a1";
>> @@ -74,6 +76,30 @@
>>   			#size-cells = <2>;
>>   			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x1000000>;
>>   
>> +			clkc_periphs: periphs-clock-controller@800 {
>                                               ^
>>>From DT spec: "The name of a node should be somewhat generic, reflecting
> the function of the device and not its precise programming model."
> 
> Here, an appropriate node name would be "clock-controller", not
> "periphs-clock-controller"
OK, I will change the node name.
> 
>> +				compatible = "amlogic,a1-periphs-clkc";
>> +				#clock-cells = <1>;
>> +				reg = <0 0x800 0 0x104>;
>> +				clocks = <&clkc_pll CLKID_FCLK_DIV2>,
>> +					<&clkc_pll CLKID_FCLK_DIV3>,
>> +					<&clkc_pll CLKID_FCLK_DIV5>,
>> +					<&clkc_pll CLKID_FCLK_DIV7>,
>> +					<&clkc_pll CLKID_HIFI_PLL>,
>> +					<&xtal>;
>> +				clock-names = "fclk_div2", "fclk_div3",
>> +					"fclk_div5", "fclk_div7",
>> +					"hifi_pll", "xtal";
>> +			};
>> +
>> +			clkc_pll: pll-clock-controller@...0 {
> 
> Please order nodes by address when they have one.
> This clock controller should appear after the uarts
OK, I will reorder it.
> 
>> +				compatible = "amlogic,a1-pll-clkc";
>> +				#clock-cells = <1>;
>> +				reg = <0 0x7c80 0 0x21c>;
>> +				clocks = <&clkc_periphs CLKID_XTAL_FIXPLL>,
>> +					<&clkc_periphs CLKID_XTAL_HIFIPLL>;
>> +				clock-names = "xtal_fixpll", "xtal_hifipll";
>> +			};
>> +
>>   			uart_AO: serial@...0 {
>>   				compatible = "amlogic,meson-gx-uart",
>>   					     "amlogic,meson-ao-uart";
> 
> .
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ