| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 11 Dec 2019 05:49:57 -0800
From: Andrey Smirnov <andrew.smirnov@...il.com>
To: linux-arm-kernel@...ts.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@...il.com>,
Shawn Guo <shawnguo@...nel.org>,
Chris Healy <cphealy@...il.com>,
Fabio Estevam <festevam@...il.com>,
linux-kernel@...r.kernel.org
Subject: [PATCH v2] ARM: dts: vf610-zii-dev-rev-b: Drop redundant I2C properties
ZII VF610 Board Rev. B is supposed to have exactly the same I2C config
as Rev. C, including I2C bus recovery settings. Drop redundant I2C
properties that are already specified in vf610-zii-dev.dtsi
Signed-off-by: Andrey Smirnov <andrew.smirnov@...il.com>
Cc: Shawn Guo <shawnguo@...nel.org>
Cc: Chris Healy <cphealy@...il.com>
Cc: Fabio Estevam <festevam@...il.com>
Cc: linux-arm-kernel@...ts.infradead.org
Cc: linux-kernel@...r.kernel.org
---
Changes since [v1]:
- Reworded commit message to clarify that I2C recovery setttins
are supposed to apply to both Dev boards
[v1] lore.kernel.org/lkml/20190820031952.14804-1-andrew.smirnov@...il.com
arch/arm/boot/dts/vf610-zii-dev-rev-b.dts | 10 ----------
1 file changed, 10 deletions(-)
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
index 48086c5e8549..e500911ce0a5 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
@@ -323,11 +323,6 @@
};
&i2c0 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c0>;
- status = "okay";
-
gpio5: io-expander@20 {
compatible = "nxp,pca9554";
reg = <0x20>;
@@ -350,11 +345,6 @@
};
&i2c2 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- status = "okay";
-
tca9548@70 {
compatible = "nxp,pca9548";
pinctrl-0 = <&pinctrl_i2c_mux_reset>;
--
2.21.0
Powered by blists - more mailing lists